Toyota - Celica :: 1990 Dies While Driving / All Lights Blinked Twice Then Out
Nov 6, 2012
I have a 90 toyota celica st. I was driving it the other day and it died on me while driving... twice! The second time was going down a steep hill and it was freaken scary for a minute as the breaks were not working, the car started again and I was able to stop! Anyway I know enough about cars that once your car starts it should not die. Could it be the alternator? It seems to start up just fine. I did notice though that when the car died on me both times I was taking a pretty sharp right turn. And when it died every thing blinked twice then out went everything. Im sure that it is a code for something but I do not have the owners manual as I was not the original owner. I just started it up today again and it makes a weird clicking noise before I even turn the key.
View 4 Replies
Advertisement
I have a 1990 Toyota Celica, and I've been having trouble with it not starting after driving. There are no symptoms when the car is running, aside from a very slight rough idle. The car starts fine after sitting for 3-4 hours, but for short trips where it's off for under 1-2 hours, it cranks but will not start. The cranking also seems weak unless I floor the gas while trying to start, and sometimes it will eventually start if I hold the gas while cranking. It always starts at the beginning of the day.
This leads me to believe I'm dealing with a flooded engine, but I'm not sure how to diagnose why. I thought it might be leaky fuel injectors, but wouldn't that cause symptoms when running?
View 7 Replies
My 1990 Toyota Corolla which I hate to retire has only 64,000 miles on it. Starts and runs but while I am driving the dash lights up and the engine shuts off and won't restart. He thinks it is the NEC (?) switch but he said he is not really sure. Spending all that money and then finding out it is not fixed would not be worth it. It also is dangerous what if I am on the expressway?
View 19 Replies
I just got a 1990 toyota celica and it turns over but dont start. its getting fuel up to the motor. i got it from a friend that gave up on it and he got it from a guy that replaced the 2200 with a 2000 engine. everything looks to be connected but i dont know where to start.
View 1 Replies
I have a 90 celica, and while I driving today, the engine started smoking. I pulled over and took a look. The smoke was coming from behind the smoke and air filter area. I let it sight for about 2 hours and drove it back home and it wasn't smoking. Both times, it was on the road for about 20 minutes. I got a buddy of mine to take a look and he said that it was caused from the coolant boiling(I didn't think coolant coils boil). And it rained for a week straight, and I haven't driven it since it started raining. Could that have anything to do with it?
View 6 Replies
I have a 1990 Toyota Celica that won't seem to start after I've driven it awhile. After sitting, it takes around 4 or 5 hours for it to start again (although this is highly variable). The first start of the day is always normal. Recently it will stall at idle, then have trouble starting up. The engine seems to "try harder" to start if I press the gas.
The weird thing is that I was able to start it up easily today by popping the clutch. This has been a problem I've been struggling with for a few months, and over that time I have replaced the starter, battery, fuel pump, spark plugs and wires, and EFI/Main Engine relays. It always cranks, just no start.
View 3 Replies
I have a 1990 toyota celica. The parking attendant somehow locked the steering wheel and the key will no longer turn in the lock. I tried everything i could think of: turning the wheel whilst turning the key, putting car in all positions other than park and then turning the wheel and key, changing the key, etc....The steering wheel remains locked and will not unlock.
View 11 Replies
got a sweet deal on it but only 1 problem with the car. when i shift into 2nd gear there is a grinding noise, however it doesnt grind if i drive super slow... it doesnt really matter if i upshift or downshift into 2nd it will make the noise either way... also the grinding noise is only there WHILE shifting the lever into 2nd gear so its only there for a second, once the lever is shifted into 2nd gear there is no grinding noise at all...not sure if this is related but the clutch pedal also feels very lose just when its about to hits the floor...
View 4 Replies
My truck is having a problem lately where it will suddenly die while driving. It feels like it loses either spark or fuel and happens about 20-30 minutes after I drive it. Once it dies you can turn the key off and restart it and it will fire up and run again, for how long I'm not sure because I'm almost home about that time. It has a fairly new fuel pump, 2 years old, a fuel filter the same age, new cap and rotor, new air filter, probably could use some new plugs. I replaced the TPS with an older one that I had laying around and had no change in performance. I get a 34 and 43 code (MAP and knock sensor) when I do a diagnostic on it.My question is do you think a MAP sensor or knock sensor would cause this kind of failure before I go out and buy them? I'm leaning towards the MAP sensor but not sure that it would have this kind of an effect on the engine.
View 4 Replies
My 1990 Toyota 4runner won't stay running after I changed the air filter. Starts up for couple sec then dies. It ran the same morning then had problem after changing filter.
View 2 Replies
I own a 1996 Toyota Celica. When the car is cold it starts and run for about 5 minutes then dies. When I try to start the car, with the key in the 'on' position, I have no check engine light. If I crank the engine and release the key to the 'run' position, the 'check engine' light turns on. When the car is cold or I leave it to rest for a couple hours and I turn the key on the 'check engine' light turns on. it is after the car stalls out i have this problem. At this point if I spray some starter fluid into the intake the car attempts to start. I thought that it was the pump so I installed a new one. Fuel pressure is good. It seems to me that the injectors are not working.
Is it the computer? Given that fuel is getting to the injectors but the injectors are not firing, Given that I have ignition since when I spray starter fluid into the intake the car fires up and runs until it runs out of starter fluid. Where do I start? I have not used a noid light as yet to check the injector harness and as you all know the harness is a little difficult to get at because of its location under the intake.
View 6 Replies
I just had the engine in my 2001 Toyota Celica replaced with a rebuild at 145,000 miles (the original engine was burning oil). It runs fine but now every time I fill the tank with gas and start the car it runs for about 15 seconds then dies. This goes on about four times then it runs fine. After the initial dying eposoide the car runs fine until i fill-up again (i usually fill-up when i have avout 1/4 tank left). Before the engine replacement I had no problem like this. The mechanic thought the problem was the fuel pump and replace it and the filter and inspected the tank for debris. I am still having the problem
View 10 Replies
I have a 2002 Celica GT.
It was driving fine for a few months after buying it and now all of a sudden it will just die while driving down the road. It will start and idle fine for hours but after about 15 minutes of driving it down the road it will just die without any kind of notification. It will start back up and run again after I let it sit for 15-20 minutes but will do it all over again but if I try starting it right after it dies, it will start and immediately die again. The only codes it is reading is the #1 spark plug is misfiring, but it has been that way since I bought the car.
I was told to clean the O2 sensor and throttle body, which I did and it ran fine for a few days but is back to dying randomly.
View 9 Replies
My brother was the original owner then passed it on to me. I then passed it on to my younger cousin about two years ago. The car is completely stock and has never been modified. Everything is OEM.Just a couple of weeks ago I was called by my cousin saying the car broke down on her .The problem is that we took it to a few mechanic shops but they still haven't fixed it ...
Problem with car: When pressing on the gas, the idle drops and then the car dies (a scary event that happened to us and on a main road). I do not wish to bring it to another fail mechanic shop.What the shops did: changed all fluids, distributor cap and plugs, new spark plugs, and replaced air intake piping with oem piping.
View 6 Replies
After driving my car for about ~15 miles it bogs, throttle doesn't respond, if anything makes it worse. And then she dies. I've cleaned my MAF sensor and checked for spark, cleaned the connectors.
The only symptoms it seems to have is-when my A/C is on, the idle will jump from ~1000 RPMs to 700RPMs to 900RPMS etc. Its all over the place every few seconds.-bad gas mileage
My culprits right now are maybe -the fuel filter getting clogged up, -or the fuel pump overheating? (even with a full tank) -or my O2 sensors. Do O2's overheat? I feel like it could be that, given the horrible gas mileage I'm getting.
View 3 Replies
I had my minivan stop running while i was on the freeway. My electrical seemed a bit off, the speed decreased and it slowly died. I tested the battery and it was fine, tested the alternator and it failed. I changed the alternator and still wouldn't start. I changed the battery as well and it worked for about 2 days and then it did the same thing. Radio started to flicker, all the lights turned on and the car decreased until it didn't run anymore?What could this be? Bad gearing? A faulty brand new alternator?
View 4 Replies
I have a 1994 Toyota truck that overheats and dies after 2-3 hours of driving. Once it cools, it starts back up until it gets hot again. It has been taken to many different professionals and no one can find anything wrong with this truck. One shop changed the fuel filter and checked the catalytic converter. Another checked the radiator. One said it could be the fuel pump, but found nothing wrong. The problem still exists! The truck is used for work (delivering mail in rural areas) so there is a lot of stop and go.
View 9 Replies
On my 2000 toyota celica I have no dash lights Including no fuel gauge level indicators. I can not find any bad fuses unless there is another hidden fuse box somewhere...
View 4 Replies
Problem with my '86 Celica's charging system. Car has about 135,000 miles and original alternator and belt. It is usually driven once or twice a week, but after sitting about 10 days, the tail light, brake, and battery warning lights came on when I started it. The lights went out after a minute. This same sequence of events happened the next three times I started the car that day. The fourth time, the lights went out but came back on as I drove. I found that revving the engine to between two and three thousand RPM made the light go off, but it sometimes came back on. And the engine revving isn't a sure thing now. Hit and miss. My wife and I have been trying to diagnose the problem.
When the warning lights are on, the dash voltmeter is near the bottom of the operating range. After revving and the lights going off, the voltmeter jumps up near the top of the normal operating range indicating the battery is charging.
The belt is checkered on the inside but not frayed. It deflected about 7/16ths inch midway between two pulleys about 17" apart. The Haynes manual said 1/2 inch was maximum deflection for that span. No unusual noises from the alternator.
We ran a checklist from my Haynes manual but I think it has an error in it. Here are the two steps that don't make sense. I marked the parts that seem to contradict with asterisks.
h) Disconnect the battery cables (negative first, then positive). Inspect the battery posts and the cable clamps for corrosion. Clean them thoroughly if necessary. Reconnect the cable to the negative terminal.
i) With the key off, insert a test light between the negative battery post and the disconnected negative cable clamp.
1) If the test light does not come on, reattach the clamp and proceed to the next step.
2) If the test light comes on, there is a short in the electrical system of the vehicle. The short must be repaired before the charging system can be checked.
3) Disconnect the alternator wiring harness.
(a) If the light goes out, the alternator is bad.
(b) If the light stays on, pull each fuse until the light goes out (this will tell you which component is shorted)."
Well, we decided that the last instruction in Step h should be to reconnect the POSITIVE cable (but could be wrong). I did this and we did Step i as written. The light came ON (Step 2). Disconnect the alternator wires at two points. Light stayed ON. Pulled every fuse under the hood and on the kick panel by the clutch. Light stayed ON.
The battery is near the end of its warranty period--about two-year old DieHard. Voltage at the terminals is about 12.4V with key out, about the same with ignition on but not running, the same with engine running and the dash lights showing, and about 14.5V after I get the dash lights to go off and the battery starts charging.
So, we're at a standstill. Tests say the tension on the belt is okay. The test light testing indicates the alternator is okay and the test light stayed on as fuses were pulled. The key was out of the ignition during the testing, but there are circuits that work without the key (brakes, hazard, headlights, etc.). Is the belt maybe slipping even though it is within specs on tension? What about the contradiction in the Haynes testing?
View 7 Replies
I've got a 2006 Prius, it's done this a few times before but self-resolved, this time it stayed dead- cold morning pressed power- all the gear lights blinked on-off, the fuel gauge goes up and down and no ability to engage gears.
I jumped it and got it to look "normalish": in park, normal dashboard lights, etc but when I tried to engage the gear into drive it just wanted to go to neutral. i thought maybe it knows that it's still attached to the jumper so I unhooked all that and when I got back into the prius it was dead-dead again- no lights, nada. I was doing this by myself.
View 3 Replies
Last night I turned a corner and the footwell lights went on full bright all by themselves for like 3 seconds, then they blinked off, then came back on at the normal dim setting I keep it at. That was weird.
View 6 Replies
