Toyota - Camry :: 2010 - Making Squealing Noise While Backing Up - New Rear Brakes?
Sep 28, 2016
Our 2010 Toyota Camry makes a squealing noise as we back out of our garage.Does this mean we new rear brakes?
View 15 Replies
Sep 28, 2016
Advertisement
Toyota - Rav4 :: 2010 - Brakes Making Grinding Noise
Just bought a 2010 Toyota Rav4 about 2 weeks ago. It rained the other day and the brakes made a grinding noise the first time I braked after starting the car but didn't make it after that. Did it again the same day, still raining, but only the first time I braked after starting the car. I have a 30 day guarantee on the vehicle and need to know quickly if the brakes are bad or not.
View 7 RepliesSonata I45 (LF 2015+) :: Brakes Making High Pitched Noise When Applied And Backing Up
With only 1,800 miles on my 2016 Sonata Limited, the brakes make a high-pitched noise when applied and backing up. I noticed yesterday the noise has also started as I brake for red lights.
View 5 RepliesCamry :: 2010 - Passenger Side Rear Brakes Making Metal On Metal Sound
At 75K my passenger side rear brakes were making metal on metal sound. I was really surprised as I have always learned that the front brakes take 80% of load and they always go out before the backs. So I took the wheel off and sure enough the pads were metal on metal. Changed everything out. (new rotors). I then went over to the driver side rear brake. Looks brand new. The pistons were barely out. I figured this caliper is bad. (I haven't change yet)
When I drive I can hear a very faint metal on metal sound when I brake. VERY FAINT. So with 75K miles on I figure the front brakes are due. Today I took the wheels off and inspected them. Tons of pad left on both of them. If I didn't know better I would say a brake job had been done very recently. (I've owned the car new so I know they have not had a brake job) However after reading many articles on this site I found a thread where one user said he was changing his front brakes for the first time with 110K on them and the pads still had 10K left in them. So the fact that my front pads are still pristine at 75K may not be a big deal (or not as big as I thought. Also I am not hard on brakes.)
However I'm not sure what is going on. Why would the passenger rear brake be metal on metal at 75K and the three other pads are like new. Is the passenger rear the only one working (or working much harder than the others) meaning the other three are bad? Or is the rear passenger bad and the other three are good? I have a working knowledge of cars but I am by no means a mechanic.
Camry 2012+ :: Windshield Wiper Making Loud Squealing Noise Whenever Wipe Down
When it rained recently, the windshield wiper started making a loud squealing noise whenever it would wipe down. When I would spray the windshield fluid, the noise goes away but returns when I stop. No noise when it wipes up or when the rain is light drizzle or very heavy. So only noisy when rain is medium to heavy.
I thought maybe something sticky got on the windshield so used a regular glass cleaner multiple times but it's still noisy. What it could possibly be???
Brakes :: 08 Scion XB - Horrendous Squealing Noise Coming From One Of Rear Wheels
I have a horrendous squealing noise coming from one of my rear wheels. Sounds bad at low speeds, changes frequency to higher pitch when going faster. The sound isn't constant (some times nothing), other times loud as hell. Sometimes gets worse when turning, then nothing when straightened out. When breaking, sometimes the sound gets worse, then goes away. It doesn't sound like a bad wheel bearing (had one go before- more of a growly noise). This sound is too high pitched. Also, checked the brake pads (plenty of life left), and rotors are good too.
View 5 RepliesPrius (2010-12) :: Clunking / Clicking Noise Coming From Rear Every Time Backing Out Drive Way
The car is under 25k miles. I have owned for less then 2 years. Recently, I notice a noise coming from the rear every time backing out the drive way. The sounds louder in the winter**. I have gone to 3 different dealers and non of them offered a remedy. Some say they cant reduplicate the issue so I scheduled a test drive with a tech. Was able to duplicate the issue, however the tech says its normal ( pad shift over time) and told me a lot of the newer carmy has the issue. I'm exhausted from going dealer to dealer and no remedy issue. They all said the same thing "its normal & there's nothing they can do".
View 2 RepliesCamry :: 2007 Toyota Oil Change - Loud Squealing Noise When It First Accelerates
I recently did an oil change on my wife's 4 cylinder 2007 Toyota Camry which has about 126.5k miles so i was suggested at Autozone to use synthetic 10w30 instead of the conventional 5w20 they put at the shop when my wife gets an oil change. So i did a oil flush and did the oil change with the new synthetic 10w30 and now the Camry feels really heavy and has difficulty accelerating at first. It also makes a really loud squealing noise (like when your breaks are bad) when it first accelerates. Should I go back to conventional 5w20 even tho it has so many miles? Is there anything else wrong that i should get checked?
View 14 RepliesToyota - Camry :: 2005 - Rear Calipers Stuck Open And Rear Brakes Not Working And Rusted
I have a 2005 Toyota Camry that we purchased 14 months ago. When purchased it had bad brakes so the dealer replaced the rotors and calipers at their expense. A month ago I took the car in for a routine oil change and was notified that my rear calipers were stuck open and that my rear brakes were not working and rusted. The rotors look hardly worn, the one on the passenger side has some deep grooves in it and the driver side is pitted. We feel that we had poor work done when the brakes were replaced and that the back never worked. After the brake job was done we would get some "chinging" noise in the back brakes and I had them inspected twice and they said everything was fine. But now we find out they weren't fine.
View 8 RepliesFord Super Duty (1999-2016) :: Driver Side Rear Brakes Making Popping Noise - Bad Rotors / Rear Wheel Bearings?
99 F-250 Ext cab 4x4 7.3 285,000 miles.
I got home today opened my door and got snaked in the face with the smell of brakes. I got out of the truck then I heard the drivers side rear brakes popping as they are cooling down. I reached down to touched the wheel and it's crazy hot. Opened the garage and went to retrieve the infared thermometer. The rotor/caliper was 350 degrees, hub was 150 degrees, axle tube was 90 degrees.
I took the wheel off and inspected stuff. The rotors do have some heat spots, the caliper visibly looks okay but not 100%. The pads look like even wear. I am guessing that the caliper either is hanging up or I have a wheel bearing going? The passenger side was like 80 degrees on everything. There is a slight shimmy while driving which to me feels to me like the beginning of warped rotors. I don't hear anything to me that screams wheel bearing noise wise.Brakes or bearings?
Hyundai :: New Rear Brakes Making A Grinding Noise Around 15 - 25 Mph
My car came back from the shop yesterday with new brakes and pads and seems to be making some odd noises, both at low speeds and while breaking. I called the shop this morning and they said that this sound was normal for awhile but to come back in a week if it persists. Is this sound advice, or should I be driving my car right back to the shop?
2005 Hyundai Tucson 122,000 miles
Kia - Sportage :: 2009 - Rear Brakes Making Grinding Noise
I have 23, 400 miles on my Kia Sportage 2009 and just found out I need to replace both of my rear brakes.They were making grinding noise. Is this a defect? Seems like low mileage to have to replace them?Also my front brakes are down to 50%. Is this a known KIA issue?
View 4 RepliesHonda - Cr-v :: 2000 - Rear Drum Brakes Making Noise
I have a 2000 CR-V with rear drum brakes that make quite a bit of noise. When I press the brake pedal, they make a noise like the shoes are grinding on something other than the drum itself. Also, when I press the pedal at the right amount of pressure at the right speed, I get a loud high pitched squeal as if there's a metal tab rubbing on the drum. I did this brake job with my dad about 6,000 miles ago (154xxx miles now) including the front pads. We did everything right and bled the brakes VERY thoroughly.
We used the same drums as before (however, we replaced the front disc rotors) and everything is how it should be. I even adjusted the shoes' pressure on the drum a bit to see if it would stop. Also, the squeal noise seems to be worse when I haven't driven the car for about 2 hours or in the morning when it's colder and the brakes haven't been used in several hours. What's causing these noises?
Elantra XD (2001-06) :: Rear Brakes Making Noise While Coming To Last 10 Mph To Stop
Any fix for the rear brake noise I am getting on a 2001 Elantra. I pulled the drums off and inspected the drums and shoes all looks fine. Then I adjusted the brakes cleaned everything and still get noise. It occurs as the vehicle is coming to a stop last 10mph to stop.
View 13 RepliesPrius (2010-12) :: Brakes Squeal While Backing Out
Why do my brakes so loud at only 6k miles while backing out of my driveway? Yes it's cold and it's been snowing, but that sound is horrible!
View 5 RepliesPrius (2010-12) :: Rear Passenger Wheel Squealing Noise Proportional To Speed
Is it my wheel bearing, rotors or brake pads?
How do I describe it... well it has this squealing noise and it's proportional to my speed.
Heard this while I had my windows rolled down.
Toyota - Camry :: 1995 - Making Clunking Noise
I have a 1995 Toyota Camry. I let my niece use it while on xmas break when I went to go pick it up it made a clunking screeching sound as i tried to back it out of the parking lot. I found it difficult to turn the wheel as well. I had to get it home so I drove from Orlando to St Augustine. Weird thing is that once on the highway going 70mph i didn't hear the sound anymore. I thought it was ok. I stopped in Daytona for gas and as i pulled away that sound began again. This lasted until i got to accelerated to about 50mph this time. I heard it again going through my neighborhood which is 25mph. It was very difficult to turn the wheel. My husband checked the power steering fluid which it was empty.
View 6 RepliesPrius (2010-12) :: Clunk Sound From Front Brakes When Backing Up
I just had the left front strut replaced by an independent shop. Afterwards they noticed that pressing the brakes after backing up produces a single 'clunk' sound from the front. Not sure if it's from the left or right. Also not sure if it was doing this before the repair and didn't notice, or it just started. It only happens once, although I haven't tried backing up twice in a row.
View 4 RepliesCamry :: Making Scraping Noise From Right Rear Brake
I have a 6-cyl, 2000 Camry that is making a scraping noise from the right rear brake. After driving it for a while I put my hand near the rotor and it was hot. The other side wasn't. I changed the pads and rotors yesterday and it's still making the noise. I'm guessing that there's something wrong with the caliper. Do I need to buy a new one? Can I rebuild the current one?
View 6 RepliesCamry :: 2007 Making Noise From Rear When Accelerating From 0 To About 10-15 Mph
This is going to sound odd but here is the case: When accelerating in car from 0 mph to about 10-15 mph there is a noise coming from the rear. It sounds as if it is coming from the axial or something because it does it once every revolution. But the wierd thing is is that it does it louder when it rains or any moisture is in the air!
We had back right bearing replaced. But still makes noise. Don't think it is rock or tire because it only does it sometimes when speeding up. And does it very loud when raining or humid
Toyota - Camry :: Front Pads Started Making Noise On Brake Application
05 Camry, 2.4L, 47K. Replaced the front brake pads two months ago. I put in Akebono pads and did nothing with the rotors as the original pads were not completely worn out and there is no vibration whatsoever in the pedal.
The pads have recently started making noise on brake application. I'm getting ready to take them back apart and re-lube everything. Should I take some sandpaper to the pads & rotors to knock off any glazing? Do I hit it with a course or fine grit? I have not had this problem happen in the past and was thinking that maybe it is the quality of the pads but I believe these are oem...