Toyota - Camry :: 2006 - Water Pump And Serpentine Belt Replacement
Aug 21, 2011
Is it possible to change the water pump and serpentine belt in a 2006 Toyota Camry with 4 cyl. engine in less than an hour?
View 4 Replies
Aug 21, 2011
Advertisement
Toyota - Rav4 :: 1997 - After Replacement Of Timing Belt And Water Pump Noise Like Metal?
I had the timing belt, water pump and thermostat replaced on my '97 RAV4. The next morning while braking at a red light I heard a rapidly repeating sound that sounded like metal on metal. The car never made that sound again but now I'm hearing a noise coming from the passenger side of the engine (timing belt side). When the engine is cold I don't hear it. After driving a while its starts, then once the engine warms up it generally goes away (except for this morning which was the coldest morning since this started, temps in the 40s).
I was only hearing the noise when the car was stopped either in drive or reverse (reverse sounded louder) if I lightly let up on the brake pedal (there's no pulsing in the brake pedal). Once under way the sound goes away. This morning it was making the sound virtually every time I came to a stop (once the car warmed up) even with my foot firmly on the brake pedal. I recorded the sound Saturday while standing still with the car in drive and my foot slightly easing up on the brake pedal. The sound starts at the 20:30 mark, what it could be?
Passat (B6) :: 2006 2.0t - Timing Belt And Water Pump Replacement?
How to change the timing belt and water pump on a 2006 2.0t passat?
View 3 RepliesGolf IV R32 :: Water Pump Seized, Shredded The Serpentine Belt
So, I somehow ended up with a hole in my oil pan. Long story short: water pump seized which shredded the serpentine belt. Had the car towed to the dealer. They found the hole in the oil pan. Pretty sure it wasn't there prior to the tow, and unfortunately I didn't watch the driver unload the car when we got there. Both tow company and dealer have just shrugged their shoulders on it.
I let the dealer replace the water pump because it's not something I was interested in tackling with everything that needs to be moved out of the way to get to it. However, I towed the car home myself (flatbed carrier from U-haul) to do the oil pan. I just got
Camry :: Idler Pulley Replacement On Serpentine Belt Tensioner
2002 Camry 4 cyl. Can the idler pulley alone be replaced on the serpentine belt tensioner? I noticed a very slight side to side play when I had the belt off. No noise from it. When I looked at rock auto, they sell the whole bracket with the pulley.
View 2 RepliesToyota - Pump - Corolla :: Service Engine Light Came On / Water Pump Replacement
My daughter has a 2004 Toyota Corolla and the "service engine" light came on. The diagnosis was that the water pump needed to be replaced.
View 1 RepliesAudi - A4 :: 2002 - Still Overheat After Replacement Of Water Pump / Thermostat And Timing Belt?
I have a 2002 Audi A4 1.8T with 85,000 miles. Recently my car started overheating, I replaced the water pump, thermostat, and timing belt. The mechanic also ran tests to make sure there were no issues with the head gasket, those tests came back saying the head gasket was a-ok. Yet, my car is still overheating but only on days when the outside temperature creeps above 90 and I am in stop and go traffic. I have to re-fill the coolant tank about once a week depending on how much I drive. I find no coolant puddles under my car when it is parked, so I do not believe it is leaking. What else could be causing my car to overheat?
View 2 RepliesDodge - Intrepid :: 2002 - Overheating After Replacement Of Timing Belt / Water Pump?
I have a 2002 Intrepid ES with a 3.5L V-6 with 264,000 miles on it. I have recently had the timing belt and water pump changed. Three weeks later I am driving home and the temperature gauge starts climbing. This is the first time this car has ever overheated. Well, I call my buddy who is a certified mechanic and he tows the car to his shop. I have him check the water pump to make sure it hasn't prematurely failed. He tears the front of the engine down and inspects the pump. He finds nothing wrong with the pump but he discovers the timing belt tensioner has failed and it has caused the engine to jump time, I tell him to go ahead and replace the tensioner.
After he put the engine back together he started it and it ran cool while it was sitting at idle for about 45 minutes. Then he took it for a test drive and it overheated again. He checks the thermostat and finds that it has also failed; he replaces that also, still overheating. New radiator hoses, upper and lower, new radiator, new thermostat, new water pump and it still overheats. He put dye into the coolant to check for a blown head gasket and it tested negative for a blown gasket. The exhaust doesn’t smell of burning coolant or producing white smoke. My mechanic friend and I both have run out of solutions…
Toyota - 4runner :: 2005 - Need Replacement Of Timing Case / Oil Gasket / Water Pump?
We have a 2005 4runner with 75,000 miles that we recently took to the dealer because the coolant level was low. Turns out we need a new timing case cover, oil gasket, and water pump.Question 1 - is this normal to happen on a 2005 4runner with 75,000Question 2 - How much is a reasonable amount to pay for this repair? Evidently, it is a laborious repair.
View 4 RepliesAccent MC (2006-11) :: Can Water Pump Be Replaced Without Removing Timing Belt?
I have a 2007 Accent with 119K on it.
I wanted to replace the water pump and I was wondering if this can be replaced without removing the timing belt or the lower timing belt cover?
Sonata NF (2006-10) :: V6 Water Pump Replacement?
I am trying to replace a water pump on a 2006 Hyundai Sonata, 3.3L, V6. But I hit a snag. I have removed the drivebelt but I can't get the water pump pulley off due to clearance. The water pump pulley is hitting the engine mounting bracket. All the manuals said I could remove the water pump pulley and the water pump and made no mention of removing the engine mounting brackets. I was wondering if there was a way to remove the water pump pulley, and the water pump, without dropping the engine and removing the engine mounts? If I do have to remove the engine mounts, do I need to remove the mounting brackets on both sides?
View 13 RepliesHonda - Odyssey :: 2006 - Serpentine Belt Breaking The Timing Belt
Serpentine belt on a 2006 Honda Odyssey fraying and then ripping into the timing belt causing that belt to break? I recently had this scenario given to me as the cause of my recently replaced timing belt breaking.
View 11 RepliesFord Super Duty (1999-2016) :: 2006 - Serpentine Belt - How To Route The Belt Around Tensioner Pulley
2006 6.0l ... I've read all over for tips on routing this belt and everyone plays it off as being some simple '20-minute' task. I'm on my 4th hour on this now.
I can't figure out how to route the belt around the tensioner pulley, circled in the picture (from another thread). Everyone glosses over how to do this and I can't figure it out.
It seems like the only way to get it on is to bend the belt and slide it between the pulley and the block, but that I just can't reach the blasted thing.
Lexus ES 2007-12 :: Serpentine Belt Replacement Procedure For ES350
I have a 2007 ES350 with over 65 k miles on the clock. I would like to change the serpentine belt as a preventive measure. Looking for a procedure on changing this belt? Pics ???
View 4 RepliesOldsmobile - Cutlass :: Serpentine Belt Starting To Shred - Replacement?
I had my serpentine belt replaced 3 months ago because it was starting to shred. Yesterday it broke again. The garage said the second time was caused by a problem with the crankshaft pulley. Shouldn't they have noticed a problem with the crankshaft pulley the first time it was replaced?
View 5 RepliesCaravan/Voyager :: 2006 - Engine Light Is On After Water Pump Replacement
I had to replace the water pump on my dodge Grand Caravan, which was challenging, but I got it done. But now the engine light is on.... why would that happen? I did take off the filter hose, and unplugged the cord to move the air filter housing, but I plugged it back in when i re-hooked everything up. So now I am nervous that i did something wrong. Why the engine light would come on and stay on? water pump works, put coolant in etc.... no leaks.... so now i just need to figure out the engine light.
View 9 RepliesFord Ranger / B-Series :: 2003 - Repeated Serpentine Belt Replacement
2003 3.0 ranger... This will be my 3rd time replacing serpentine belt and if needed 2nd. time for idler, tension pulleys...NOT SURE WHAT TO DO, should i replace parts again?
View 5 RepliesToyota - Camry :: Water Pump Taken Apart And Glued Back Together
I had the timing belt and water pump replaced on my wife's 2001 Toyota Solara about 2.5 years/30,000 miles ago.
Recently I have been told by a different mechanic, other than the one who performed the original timing belt/water pump service. That water pump looked as if it had been "taken apart and glued back together". Also the same mechanic told me that the reason for my continuing oil leak from the valve cover was that it was incorrectly changed and the wrong "putty" was used when the valve cover gasket was changed. This was the third time V.C. began leaking since it was changed a year ago at said timing belt mechanic and reason for the visit to a new mechanic. So my problem is who or what to believe. I have a 30,000 mile old water pump making lots of noise and leaking a good amount of coolant. I tried to contact the owner of the original service shop but not yet spoken to him directly about my problem. Prior to this I had nothing but good experiences with this shop in regards to my 91 Nissan pickup truck. But as soon as I take my wife's car in I have had nothing but problems.
Toyota - Camry-hybrid :: AC Won't Blow Cold Air After Drive Belt Replacement
My drive belt broke and I replaced it with a new one and now ac wont blow cold air. It was working fine before. I can hear the compressor running but not blowing cold air.
View 1 RepliesCamry :: Toyota 2008 - Misaligned Water Pump Pulley?
I have a 2008 Toyota Camry, 4-Cylinder w/ 55,000 miles on it.
Yesterday, when I started the engine I heard a rattling noise. Opening it up and looking inside, it seemed to be coming from the area of the serpentine belt. Looking closer, I saw that the pulley appeared to be wobbling slightly, although it didn't feel loose to the touch.
As I'm out of town on a roadtrip and needed to try to get home, I decided to try to drive it anyway. Aside from the noise itself, the car ran fine - the engine temperature stayed normal, which I kept an eye on closely.
After a bit over 50 miles of this, however, the serpentine belt got thrown off. With my engine temperature rising, alternator not functioning and power steering cut out, I pulled over immediately and shut off the car.
Looking more closely at the water pump pulley, I could see that it was clearly tilted in its alignment in comparison to the other pulleys along the belt's route. This explains the wobbling I saw. Clearly that needs to be repaired, lest it throw off the serpentine belt again.
So, this brings me to my questions here.
Given that the water pump itself seemed to be functioning fine during the drive until the belt got thrown, is it possible that just the pulley itself is broken? Or that it's misaligned?
If so, is it possible to replace / realign the pulley without having a mechanic tear the car apart to get the water pump out?
If these aren't the issue, is it possible that the water pump itself is just misaligned as opposed to broken? If so, can it be realigned without buying a new one?
I'm basically trying to assess
* what exactly is the problem
* whether it is something I can fix myself without a mechanit
* whether I'll need parts and what those parts would be
* how many hours of service I should expect to have to fund if I can't do it myself
Here's a picture of how it looks right now .....
Toyota - Echo :: 2001 - New Serpentine Belt Still Noisy
Just replaced the drive belt on my 2001 Toyota Echo, 100k, AC. First replacement as far as I can remember - don't know if a shop ever did it in the past, but doubt it, and did this change myself. I opted to replace because,
1) it seemed about time, and
2) I was getting some belt screech before the engine warmed when it was cold and damp out.
But, now I have an even worse screech. I've only noticed it happening at night (alternator resistance from the headlamps?), when it's cold and there's dew on the windows. It's intermittent, but increases in volume under load (initial acceleration from stop, or downshift to engine brake). I thought it was connected to the dash fan being on, but apparently not, as the sound is present (again, only on cool, damp, nights) when the fan is off, both AC on and off.
One last detail - I may have a bit too much tension on the belt. In this car the tension comes from pulling the alternator away from the engine, and I had a hard time getting a good reading on my tension indicator. I'm likely at the high end of the recommended tension but may be exceeding that to some extent.