Touareg :: Tranny Shifts At Low RPMs, Not Much Acceleration
Mar 19, 2004
I have a V6. When I just want to slowly get going I very slowly depress the pedal and hold, or leave off when speed is reached. Tranny shifts at low rpms, not much acceleration. I have completely avoided kickdowns, which exhibit a bit of a lag. When I really need to get going quickly off the line I steadily press the pedal more quickly than for a slow start. The effect is quite remarkable; tranny holds gears until about 4,000 or 5,000 rpm, and the car really moves. When I need to accelerate and I'm already moving I always shift into sport or I use the TIP.
View 6 Replies
Advertisement
I just picked up a new 2006 Touareg V6 with package 4 Offroad Gray with all the fixin's. I'm still learning all the features of the car, I'm finding more and more innovative functions every day. I did have one "concern" that I have been noticing as I drive around, the transmission seems to want to hunt for a gear... sometimes when accelerating the tranny seems to get confused and shifts up and down suddenly before settling on a gear.
Also, this morning when I put the car in R, it wouldn't lock into reverse, it was stuck in neutral before it dumped into the reverse gear violently. The other thing that I have noticed is that it sometimes locks in gear when moving, it'll hold a low gear and not upshift when it should or it'll hold a tall gear and not downshift (for example it'll be in 6th gear even when I slow down to 20mph and then when I try to speed up it'll stay in 6th gear).
I believe this car is drive by wire and it's the first one that i've ever driven.... i've driven other autos before but they have been much smoother and more "direct" then this tranny. I did have an audi before this and that also wasn't the smoothest auto tranny either, it also seemed to have a mind of its own. Have people had these kinds of problems before and should it be something I should be concerned with or take back to the dealer with my concerns? It is a brand new car, i bought it with less then 30 miles and it has only 400 now. I love everything else about the car, the interior is top notch and the fit and finish is excellent so far, my only concern is the tranny.
View 12 Replies
After they flashed the TCM (vin 34000). Did not notice this before flash. Mild acceleration in a continuing curve to the right as the tranny shifts to 5th wheel pulls sharp to the right. Like a strong twitch. Also does it in left turn but not as strong. Didn't really bother me (driving wife nuts though, and its her car) in the dry, but Sat. nite on snow/ice scared bejaysus outa me. Felt like I was going to spin. If I lift before shift to 5th it doesn't happen. "Twitch" is about like you would to to miss something in the road. Maybe not that strong. Car thinks continuing radius curve is a decreasing radius turn. Not good. Haven't found the right road to try it under hard acceleration
As an aside, Contis worn out evenly at 10,000 miles. Granted, I did remove a few pieces from them this summer, but overall tread is gone.No binding feeling on dry pavement. It does "crab", or bind at slow speeds tight turns on snow/ice, but so does my Yukon XL in 4wd Auto mode.Have to visit dealer anyway. Service fault workshop light came on a few times. Restart and it went away. And dash wood cracked.
View 3 Replies
Well - took my car into the shop today for the death lag, harsh shifting, and acceleration during braking. I've read much on this site about tranny flash and ECU flash, and was hopeful there was something available for my 2004 V8 (I just purchased it in late October, but was unsure what TSBs and campaigns had been applied before I bought it)...
In the end, dealer was able to replicate/experience the harshness problem, but was unable to come to a confident solution. My 86xxx VIN V8 Treg was not due/eligible for the much discussed tranny flash (my engine type was right, but the tranny flash was not listed for my car). In fact there were no recalls or campaigns due for my car, and there were no faults on the computer.
The dealer stated the cause as "Harsh shifting patterns". and fixed via "Reset TPS and TRANS". Essentially, I was told, let the adaptive driving feature relearn, and hopefully replace the previous harsh shifting pattern. My ride home from dealer was short, so not sure if there was any effect - but I'm not confident.
2004 V8 Silver Touareg [Nav system, Sound II, Bi-xenon, Convenience Package, Parking Assist] VIN 86xxx
View 5 Replies
I have 99 f350 v10 4x4 and trans shifts great under light rpms but 2-3 shifts very hard. At wide open from about 35 mph it will shift down and take off like a bullet but wont shift until I lift my foot and then it bangs hard from 2-3. All other gears are smooth. I did some searching and have found some threads saying it could be an accumulator spring that is broken? Truck has 115,000 miles on it. love the truck but want to fix this before it does some damage.
View 1 Replies
2001 T&C with 3.3, 4speed tranny and 128K miles.
Here's an interesting one: This morning I went went to get gas and no problems getting to the gas station. I pull out of the gas station and get to the first light, again no problem. Light turns green, I go and the tranny shifts from 1st to..... nothing! Just like I slipped it into neutral. I coasted into a parking lot, moved the gear selector from Park to R to D to L, and nothing.
I put it in Park and shut off the engine, then restart and shift into drive and it goes into gear! I start to drive away and when it's time to shift, it goes from 1st to.... nothing again! Once again none of the gears work, until I shut the engine off and restart.
After I restarted the engine I shifted to L and drove home in 1st gear keeping an eye on the tach so I wouldn't exceed 3500 RPM. Got home with no problem.
So, to recap, when it goes to shift up from 1st it goes into nothing. Just like neutral. No check engine light, not "limp mode". If I shut off the engine and restart, it'll go into 1st, and if I keep it in L so it won't try to shift up, it'll drive all the way home in 1st. Reverse doesn't work no matter what I try.
Some background: I changed the tranny fluid and filter 2 years ago at around 90K. fluid level is good. It did rain hard last night, conicidence? The engine compartment is dry.
I think it is safe to rule out a mechanical problem, this seems to be electrical and we can probably rule out the tranny range sensor since it keeps it in 1st when I have it in L and the backup lights come on when I put it in R.
View 4 Replies
I have a 2011 camry se 4cyl with 15k miles. Just wanted to know if you have to change Trans Fluid because my tranny shifts hard between gears.
View 3 Replies
I just bought 2011 Camry 23K miles, L4 engine and 6 sp auto trans. Experienced strange downshifting - when slowing down the tranny shifts down, so the RPM jumps from about 900 to 1,200 and the cycle repeats for the next gear. Feels almost like the car is getting ready for the (possible) acceleration. It mostly happens when I am coasting, not when I am breaking. I already disconnected battery for the few hours to reset transmission shifting points memory.
I have seen "transmission flare up" tread about V6 engine + 6 sp tran combination, but it is not it.
I also have 2009 Camry with 5 speed 170K miles, and it shifts so nice you could not tell what gear you are on; and have 2009 Highlander.
View 9 Replies
I have a 2006 Nissan Sentra with about 58k miles on it. When it shifts into gear I hear a slight squeak, almost like a bushing or something like that. It does not sound mechanically related. More of something squeaking or loose etc.
View 9 Replies
When cool to cold my 13 2.5L Camry SE 12k miles has shifts that are 'crisp' (not meaning that is good). It I s like it rides up to an rpm and throws on the clutch and the RPMs drop by 200rpm and then she pulls into gear. No slamming but feels like a sports car driver changing gears with just a moment of that 'transition float' between gears cause by physically moving a clutch pedal. An actual noticeable shift feeling and a moment of floating 1/2 second transition. Is this 'flare'?
I guess I could just say this... It feels like it is truly 'going between gears' rather than the typical slush sliding into gear like most all automatics do.
View 4 Replies
I just had my tranny rebuilt it doesn't shift hard all the time but it does from time to time going from 2nd -3rd and 3rd -4th I thought being new it may need to soak up some fluid so the bands can swell so I ask the shop that rebuilt it that question he said they soaked them as they rebuilt it so they should be swollen already then he proceeded to tell me it was electrical is he telling me the truth because the ck engine light isn't showing any faults and if it was electric shouldn't that have been fixed in the shop while it was being rebuilt if it was interior electronic?
View 1 Replies
My tranny guy just did a full scan and the ONLY thing which indicated a problem was 'output speed sensor' which we were able to trace back to most likely being caused by a completely hosed driveshaft (I've noticed a driveline vibration). We're going to install a new driveshaft, replace the output speed sensor(s), check for any frayed/chaffed wiring going to the output speed sensor(s) and then see where that leads us (he said something about some computer module in the dash which he's had to replace on several Sooper Dooties).
View 7 Replies
'00 PSD w/ 291k on the clock. Starts easily, runs good, only complaint is (what I consider to be) the soft shift of the tranny. Years ago, when I bought it, it came with a Super Chips Tuner. I've never max'd it out, just usually run on the performance tow. Is there any way to clean up the shifts and make them a bit quicker with less slip. When it's time to shift, dammit, I want it to "SHIFT", not slide into gear. I don't expect it to hit the gears like a manual valve bodied drag car tranny. But, there should be something to fix this without spending a bunch of $$$..
View 4 Replies
I have a 2008 GC 6 speed transmission that has 55000 miles on it. When the engine and tranny is cold the transmission shifts very hard until it warms up. There are times when shifting from reverse to drive it shifts very hard. Also, the siding doors creak when driving over rough roads. Can they be adjusted?
View 2 Replies
I have a 2000 Ford Explorer with 188,000 miles on it. I bought it used with 110K miles and put a new tranny in at that time. Now, I am having problems. I don't know if it's the tranny or the engine. It looses power when climbing hills. It takes off really slow with no power and finally gets up to speed it switches gears the whole time smoothly but the engine just can't take a load.
The check engine light came on and put out 10 codes:
P1451 EVAP Control System Canister Vent
P1747 Electronic Solenoid A-Short Circuit
P0743-Torque Converter Clutch Circuit Electrical
P0750-Shift Solenoid "A"
P0755-Shift Solenoid "B"
P0760-Shift Solenoid "C"
P0765-Shift Solenoid "D"
P0135-O2 Sensor Heater Circuit
P0155-O2 Sensor Heater Circuit
P1409-EGR Vacuum Regulator Circuit Malfunction
Those are the codes and I don't know how one has anything to do with the other. I checked the dip stick on the tranny and it's clean. Juicy red and not shavings.
View 4 Replies
So dont know whats going on, but after my santa fe sat for a day, I went to go for a drive and when I left the house, the tranny slipped in 1st gear at around 3k rpms. The rpms just shot up, hammered into 2nd, then drove off as normal.
I couldn't get it to repeat it after that.
Facts:
-Car in eco mode
-Car sat for at least 24 hours
-Outside temp 70F
-slippage happened on takeoff at 3k rpm
-No CEL's
-around 11500 miles
What it could be? Should i take it in to hyundai? OR wait and see how it drives the next couple days.
View 7 Replies
My transmission is having issues switching from 1st to 2nd gear and same issue from 5th to 6th. What happens, (when attempting to switch from 1st to 2nd) RPMs rev up high (as though it is in Neutral) then after 2-3 sec it shifts, car jumps crazy and in like 1 sec it shifts down (to 1st - RPMs jump) then shifts to 2nd gear and from there it is fine. 3rd to 4th, to 5th is great, but 5th to 6th same issue, not as extreme, but similar. If i let go of gas when it should shift to 2nd gear, and wait like 2 sec, it will be in 2nd gear without jerking - Normal.
Sometimes in Park there is this noise as though something metal is hitting another metal part, and I can feel it in car - but it goes away and only happens from time to time. Also Neutral on rare occasion works as Reverse - super rare. I did Stall test (per Hyundai procedure Bulletin 13-AT-007) - no issues. Dealer ran diagnostic - no Codes in transmission. Flushed fluid - didn't work. I drained fluid again, put new fluid in and checked ATF level per 13-AT-006 - no difference. Tested Solenoids - no problem there. What could be an issue with my transmission?? 2012 Sonata GLS 2.4L with 7k miles.
View 30 Replies
I installed the TurboKits CAI kit a few weeks ago. Installation went smoothly, and the latest kit has a modification to the box that fits our Accent's air snorkel. On cars with automatic transmissions, I had to cut out a notch from the bottom of the box to clear the transmission, but I doubt that this affects the air flow to the filter.
However, I have a big problem with the sound. The transmission often shifts at very low RPMs, and the CAI makes a very loud burble when this occurs. If I shift into a lower gear using the semi-manual mode, then the sound goes away. I realize that CAIs make a louder sound when you put your foot into it, but I find the sound a little over-the-top (especially considering that when the sound comes on, the engine is producing very little power at this part of the power band).
So, it's not really a problem with the CAI itself, more with the car's TCU. Unfortunately, it's too annoying for me, so I'll be reverting back to the original air intake system, and selling the TurboKits CAI.
View 12 Replies
When not using the manual mode of the DSG...What are the differences between driving in D and S? It seems like the car shifts more aggressively in S mode, allowing higher rpms before it shifts. Are their any other pros/cons to the different driving modes when in automatic, And what do most drivers prefer?
View 15 Replies
I have a 98 F150 4x4. I had some trans trouble so I pulled it out and had it rebuilt. Now when it shifts into drive the rpms speed up right before it shifts. What is causing the trans to do this? It doesn't do it all the time, only if I take off faster the usual which is most of the time.
View 1 Replies
The vehicle I am working on is a 2005 Camry LE with the 2.4L I4 with 172,000 miles. The problem is it surges under acceleration or when the tranny downshifts and engine is under load going up a hill.car idles fine and runs good otherwise. Its hard to explain the surging without driving it yourself but I will tell what I have done so far and car is not showing CEL.
-replaced the AFR sensor (Bosch)
-replaced the O2 sensor (denso)
- plugs look good (no fouling)
I am thinking maybe the throttle position sensor or MAF sensor. What to check next.
View 8 Replies
