Touareg :: Tires Are Not Wearing Evenly / Excessive Wear On Outside Portion
Jul 14, 2005
My 18 inch Conti Contacts have approximately 20,000 miles on them. The tires are not wearing evenly and have excessive wear on the outside portion of the tires. The dealer says that they spoke with VW and VW says that it is "normal" for the tires to wear this way because of the "turning radius" of the vehicle. I smell BS. I don't know much about this subject but it would seem to me that the tires should wear somewhat evenly if the vehicle is balanced and aligned properly.
View 6 Replies
Advertisement
My budy took his touareg to the dealer today because his front tires are wearing funny (cupping). The dealer said that is normal for the touareg. I am having trouble believing that.
View 8 Replies
i have noticed that my front tires are wearing quicker on the inside. that is to say they don't seem to be wearing evenly. have almost no tread left on the insides of front tires and these tires only have about 13000 mi on them. is this and aligment problem? dealer says no.
View 4 Replies
Because of extensive wear on my tires, I may need to be looking to replace them pretty soon. They are 19's with the OEM Pirelli Rossos on them, I'm looking for an all season tire that's high performance. I'm really lost when it comes to tires. I'm looking for something that offers good handling while lasting more than 15,000 miles. Somewhere around 50,000 maybe? Again, i don't know much about this...
View 2 Replies
Having issues with excessive front tire wear? I have had the alignment checked by two VW garages and a third party garage and all of them confirm that the alignment is good.
The VW garage also confirmed that as far as they can see there is no suspension issues, but the excessive wear on the front tires indicates that something is wrong.
I have owned the car since new in 2008 so know it has a clean history no accidents.
Both front tires look like this.....
View 18 Replies
I've been using the EV mode - the EV portion of the curve without pushing the EV button - to run around town and to maintain speed once I've accelerated to traffic speed. It really boosts the mpg numbers and I'm able to get 55-60mpg on my 47mi. Roundtrip mostly highway commutes (hills included). Without the running in EV it's probably 42-48mpg.
View 8 Replies
I replaced the front brake pads and rotors on a 99 Bonneville about a year ago. The outside pad on the passenger side has worn completely out and has ruined the rotor. The inside pad on the same side looks fresh. Everything on the driver's side looks good. What the heck happened? I am not an expert but I have replaced many of these GM brakes and have never seen this result.
View 11 Replies
Right Front Tire has excessive wear on Right INSIDE and car was pulling to the left. I rotated (or is it revolved?) my tires, and now the pulling has stopped......
OPINION: Bad tire that just wore poorly? Slight alignment issue that caused tire wear that then caused car pull? Wheel bearing issue causing tire wear? Or something else?
View 6 Replies
My original 17" Toyo tires are noticeably wearing out after only 25k miles and it appears to need replacement soon. I can probably drive for another 5 to 8 k miles but the edges may be bald by then. I looked at the Toyo replacement tires and the exact ones are actually quite expensive which means they may be in the performance tire category. For a Prius v (lowercase v for the Prius v wagon), not sure this vehicle warrants this type of tire. I will be looking for a longer lasting tire for replacement and not necessarily performance tires.
View 5 Replies
About 5K miles after putting on 18x8.5 rims with 235-40 tires noted bad reverberating droning tire noise and noticed stairstep pattern of excessive wear on inside tread blocks, equal on all 4 wheels. Is this just from going from OEM ET47 to ET35? Is camber adjustment indicated and is camber adjustable also on the rear wheels? (Of course, noise and reverberation gone when OEM wheels put back on)
View 5 Replies
My front tires had previously been wearing out a lot faster on the inside. I was told it was due to the front lower control arms, does this sound right? Is it possible and cost effective to just have the bushings rebuilt (replaced) or will i have to buy new control arms. How can I tell what my car actually needs? I just put 4 new tires on the car and am weary of driving it until i get this fixed.
View 11 Replies
'02 SC430 with just over 30K miles. She is wearing out the inside edges of the tires. We have had the car aligned twice in our one year ownership. Are these cars prone to this kind of wear and/or going out of alignment? Would this be a spring/shock/strut issue? I assume the original components are still on the car so maybe she just needs replacement parts due to age. She has low miles, but she is 11 years old now.
View 14 Replies
I'm trying to figure out why I am having problems with my read tires wearing fast. I knew my car was out of alignment and took it to a shop and they told me I have -1.05 negative toe and bad camber.
Can some shims fix my issue or would I be better with a whole new rear beam. As far as I know the car has never been lowered, but how would I be able to tell?
View 5 Replies
I have about 20,000 miles on my elantra gls with the stock 16" wheel.
I was measuring my tire tread and noticed that the outer groove of all 4 tires is down to 3/32 tread depth while all of the middle and inner grooves have about 5/32 to 6/32. My car was aligned about a year ago. Tires rotated every other oil change, i do oil changes at about 3,500 miles.
I drive pretty conservatively, though the street in front of my neighborhood is 50mph and has heavy traffic, so I have to take an aggressive about half the time I pull out of my neighborhood.
View 32 Replies
About a week ago I had my car on a hoist getting new exhaust tips installed. At that time I noticed the rear tires are wearing prematurely on the inner edges. So are the fronts but not nearly as bad as the rears. I asked around and was told that this is normal for the factory Pirellis because of the negative camber built in to our cars. This being the reason the car corners so well. I understand the physics of this and I really like the way the car corners. My question is this---Can the negative camber be taken out of the car thusly reducing wear on the inner edges of the tires?? And how much will this be noticed while driving the car normally, and during spirited driving?? I have noticed that some fellows will purposely mod their cars with increased negative camber on the rear wheels, I'm assuming this is to achieve a certain "look".
View 5 Replies
I have a 2010 fx 4 cew cab that has a 2" lift on it. I am new to the truck scene, but my wife has always wanted a big truck. I have pro comp tires that are 35 X 12.50X20 LT. They are the Pro Comp Xtreme A/T. The truck is driven evry once in a while and it is never off road. The issue I am having is that the tire wear is really bad and uneven in the front. It has been aligned 3 times in one year and the balance has been checked. I had the lift kit done at the dealership and they are saying this is normal and that the wear is due to not rotating the tires every 3000 miles. If the truck was driven every day I would understand but it only has 10,000 miles on it. Is this normal? The wear looks like a shock could be bad but they have already replaced the shocks about 3 moths after i purchased the truck.
View 14 Replies
I have an 04 ranger with 31x10.5x15 mud tires on it and the front tires are wearing on the inside real bad if you look at it the tire look tilted in on the tops...
View 1 Replies
I have an 04 ranger with 31x10.5x15 mud tires on and the front tires are wearing excessively on the inside edges any
View 2 Replies
So, my FWD car has 3 tires that are getting close to replacement tread depth, and one that is only about half worn--it had to be replaced partway thru due to unrepairable damage. The question is whether this amount of difference in tread--maybe 1/8 inch--matters. I could buy 3 and save money or buy 4 and put one away for a good reserve tire. (The spare is different).
View 8 Replies
The front and rear driver's side tires are wearing on the outside edge. Searching about, I find that camber problems are indicated with outside edge wear -- but....
View 19 Replies
About a month ago, I traded my 04 V6 for an 07 V6. Everything was fine except that this morning I turned on the A/C for the first time (had been in Econ) and what happens? Condensation on the lower portion of the windshield just like in the 04.
View 3 Replies
