A week ago I swapped out my 19's (summer) for the 18's (winter). This probably has nothing to do with the swap, but now I'm hearing a squeak coming form the drive train each time I start from a dead stop. This squeak is noticeable for the first 10-15 feet, then disappears until the next time I accelerate from a stop. I have 14k on the odometer.
View 6 RepliesI have close to 60k on my V-8 and it has been virtually trouble free. The last few days I have heard what seems to be a whining or whistling coming from the drive train at the top of 3rd, then 4th,5th and 6th. Kind of sounds like metal to metal, but is a very quiet whistle.
View 1 RepliesI have a V6. Very happy with it...no real problems, but I do notice a fair amount of drive train gear lash noise when the vehicle is coasting and the windows are open. Is this normal? It not like it sounds really bad and hasn't gotten worse in the 2500 miles since I have my Treg...but I would like to know if it is normal.
View 10 RepliesI've had my truck start making a nice CLUNK from the vicinity of the rear axle when starting moving from a standstill. (and it's a pretty decent thunk sometimes, you hear it AND feel it). I called and made an appt to bring it in and have it checked out (also having the first oil change done and gonna see if they can figure out why the automatic headlights are almost always on even on a bright sunny day) ...
View 14 RepliesI have a Jetta with 130,000 miles. At around 35-50mph during acceleration, I can feel a wobble that would seem to be coming from the driver side drive train. I don't hear any noise with this just the wobble/vibration.
Never wrecked, 5spd manual. If I am not accelerating or putting stress on the drive train, the wobble stops.
I am guessing it could be bad tranny mount, I've looked at it put some hand force on it and jiggled it around a bit and mount seems to have a little bit of play not sure if that's normal if i really try the mount it moves back and forth very little movement but some and if i can move it easily I am sure the engine can beat it up
ALSO my axle came out or broke recently so replaced it with one from advanced auto parts also another possible culprit.
What could cause the entire drivetrain to shack upon starting of the car? every time i turn the key and the engine starts to spin its like something underneath is shaking the whole car. i was thinking maybe motor or trans mounts but, i am not sure. 2005 accent gls hatchback.
View 5 RepliesSo on my 2003 F250 SCLB 4x4, I I was driving 70 or 80 miles to Huron in Ohio, to pick up a boat for a buddy with my truck. On the way up I heard a new clattering noise coming from the suspension or drive train, and we couldn't figure out what it was. After picking up the boat and coming back home without a problem, I looked under the truck and couldn't see any U-joints loose, But I saw that my right rear backing plate was disintegrated and gone. I took the truck to the shop and they said that the noise I'm hearing is the guts of the emergency brake pads and pins bouncing around in there when I drive and that my rear wheel could lock up at any time.
View 14 RepliesHave a 2006 V6 with 800 miles. Recently shen I am starting from a stop the engine bangs and kind of makes a knock. I am currently using 93 for gas...
View 1 RepliesI recall some folks (with certain VIN#s) getting a TSP for correcting the lag when accelerating from a dead stop. I asked my dealer about it during routine service several months ago, but no fix at that time.
View 1 Repliesi am wondering if any other touareg v-10 owners have experienced what i call "slop in the drivetrain"?symptoms: when just crawling off from a dead stop and then letting off of the pedal i can both hear and feel a little clunk whether forward or reverse. its real subtle but its always there if you listen for it. Is this just what they call normal "slash" of the worm gears in the differentials? i would hate to find out later once warranty's gone that i should have done something about it earlier? i have 19,000 miles on it, 70%highway and 30% city driving.
View 5 Repliesto explain exactly...Before coming to a complete stop,maybe driving 15-20 mph you can hear a squeek from the brakes.That is without riding the brakes.As soon as i press on the brake pedal eve very softly the sound disapears.Then when i am at a complete stop and slowly take off i will hear it again...eek eek eek.... then by 30mph plus it fades away.
View 5 RepliesTook it in for the 10K service and squeak that started coming from under the treg. The said it needs a new transfer case.
View 12 RepliesI have a problem with my gauges. Sometimes my RPM gauge works, and sometimes it doesn't.
When I approach the car and open the door, I hear a weird noise coming from the gauge cluster (or a nearby area). When I start the car, none of my gauges work, and you can see the temperature, speed, and fuel gauges flickering. After about 10 or 15 seconds all gauges fire up, except for the RPM gauge.
The flickering does not always occur, but my RPM gauge is dead most of the time. It works once in a while in the morning when I start the car, but once I shut down the car and start it again, I loose my RPM gauge the rest of the day.
I think the noise I hear behind the cluster or inside the steering wheel area has something to do with this problem because the cluster problem arouse when I started hearing the noise.
I managed to put the problem on video, and you may see it here. If you focus your attention on the fuel and temperature gauges right after I start the car, you will see the flickering. You will then see the needles jump to their correct readings about 15 seconds after the car starts, but as you can see the RPM gauge is dead.
YouTube : [URL] .....
I've got a 2005 Avalanche (basically, a Silverado) which has suddenly developed a possible illness. Whenever I start the truck and begin moving (forward or reverse), I hear one (and only one) loud squeak that seems to be coming from the general area of the torque converter or drive shaft (but who knows exactly). The squeak doesn't happen immediately upon moving but always happens within the first 20-30 feet of movement and then no more. If I put the truck in park, re-engage the automatic transmission and start moving, I cannot recreate the sound.
However, if I turn off the engine altogether, restart the truck and begin moving, it happens again exactly as before. It happens every time the vehicle has been restarted, regardless of whether the engine is hot or cold. Once it's happened, I can drive hundreds of miles and it won't happen again until I turn off the engine and restart it. Further, I've determined recently that if I start the truck on a hill and let it roll while in neutral and without a foot on the brake, the squeak still happens. Therefore, it's not dependent upon the transmission being in gear or the brakes being applied!
Having throttle hesitation problems. This is the 3rd time I have had it in for this problem and they can't figure out what is wrong. The vehicle moves slightly forward from a stop and then goes dead for a few seconds then seems to recover and go.
View 11 RepliesI leased a 2015 RC-350 F sport back in October. It is my 6th Lexus. I noticed that the brakes would repeatedly squeak (all types of conditions). It happens the final few feet while coming to a compete stop where the brakes would squeak incredibly loud. I had the car inspected at the dealership, and after my second complaint the car was inspected and a new set of rotors and pads were installed.
Unfortunately, the second set is worse than the first. Another complaint to the dealership and I was told they had done everything in their power, and I should complain to Lexus Customer Satisfaction. It's been 2 weeks since my initial call to them and finally after several calls to them asking for support they told me today it is deemed "normal operation of these high performance brakes".
I have a 2014 4WD Super Duty. It has a squeak that is coming from the drive shaft area. I had someone listen to it as I drove slowly next to them. It is a repetitive: squeak squeak squeak squeak squeak. Not loud. The frequency increases as speed increases. I could believe it may be a U joint based on the frequency, but seems hard to believe with a new truck. I heard this sound when I first got it, but the sound was so slight that I thought it was just some sound associated with a newer engine. But now it is becoming a bit louder.
View 4 RepliesKind of stuck on a slight noise from the drive train on our 2007 Avy. It is not engine noise at a certain RPM it is from rolling at speed. I first rotated the tires and there was no difference at all. I thought it sounded like a CV going out so I replaced the left shaft. No luck. I could still hear it as it increases from nothing being stopped to being able to be felt slightly in the steering wheel either traveling straight or turning the worst between 60 and 65 MPH.
I replaced the right CV shaft and noticed slight wear in the support bearing and the support bearing bracket pinch bolt's rubber pad was worn in half. Ok, new CV shaft, new pinch bolt, tightened to specs, no luck. Ok, onto wheel bearings. I could still feel it in the steering wheel and it "sounded" like it was coming from the left side. I even rode as a passenger and moved about trying to get a better idea where it was coming from. I was convinced it was on the left so I pressed out the old bearing and installed new. No luck, same sound at the same speeds.
I replace the right wheel bearing (replacing a front wheel bearing on this car is not a fun job). Slightly better but still there. It's a subtle noise now but at the same speeds. I guess it could be a rear wheel bearing assembly but maybe I am missing something obvious.
Lately I have noticed a sound when turning left but not right. It sounds sort of like when you go across a steel deck bridge, it's wheel speed related, not engine speed. Could it be an axle? I have 148,000+ miles on it. any diagnose/fix? As soon as it gets above freakin cold here.
View 7 RepliesMy X has had a vibration in the drive train since I bought it. I have been through 3 sets of tires and a new rear end with no significant change.
I recently replaced the u-joints, and the vibration changed. Instead of being pronounced upon deceleration, the vibration was somewhat lessened, and only occurred around 55 mph when the truck was neither accelerating or decelerating; when the throttle and speed were at an equilibrium. It was reduced further when I reduced the air pressure in the tires. It is reduced, but is still there.
I would like to get this fixed before my spring break trip.
Before I take my dads truck to the mechanic. He noticed a "noise" when running highway speeds, which does not occur often for his truck..a beautiful 2005 Eddie Bauer Explorer with the 5.0 V8. I need this checked as I drag a boat to the Fl Keys from NJ in 3 weeks and the truck needs to be 100%. He just replaced the tires as his mechanic told him it was tire whine, which you hear and dont feel. The wheel bearings have been replaced in the last 2 years and they just did ball joints. I drove it up the highway tonight and felt it right at 62 mph..go faster it got more pronounced and you could feel it in the drivers seat...not vibration on the steering wheel..above 85 and it kind of smoothed out, drop below 62 and it goes away..makes no difference if you are in the gas or not..feels like something spinning out of balance....I ran it for 30 minutes at 75 and then pulled into a Lowes parking lot and drove one set of tires up onto a curb so I could fit under the truck..I started at the back and touched everything in the drivetrain for see if anything was hot..the rear differential was warm, the ujoints were not, the transfer case was warm as was the front differential, but none of the u joints or cv joints were warm... 2005 Explorer 100,000k miles...
View 12 Replies