Touareg :: Metal Squealing Noise From Brakes
Nov 13, 2003
I've had the Treg for about 3.5 months now and at about 1500 miles I started to have intermittent squealing from the brakes. Now at 2300 its constant. I brought it to the dealer and of course all I get is the usual BS they feed everyone... brake pads today don't use asbestos and so the metal squeaks...blah, blah... total crap. No OEM brakes should squeal (let alone on a $40k vehicle) and its never been a problem with other cars with original pads. Is there a solution?
View 8 Replies
Advertisement
I have a base v6. When I turn the steering wheel (for example, to make a left turn), it sounds like there is metal-on-metal rubbing. The wheel is not extended (turned all the way til it stops)...
View 2 Replies
Is there anything that can be done to stop my brakes from squealing all the time?
View 24 Replies
At 75K my passenger side rear brakes were making metal on metal sound. I was really surprised as I have always learned that the front brakes take 80% of load and they always go out before the backs. So I took the wheel off and sure enough the pads were metal on metal. Changed everything out. (new rotors). I then went over to the driver side rear brake. Looks brand new. The pistons were barely out. I figured this caliper is bad. (I haven't change yet)
When I drive I can hear a very faint metal on metal sound when I brake. VERY FAINT. So with 75K miles on I figure the front brakes are due. Today I took the wheels off and inspected them. Tons of pad left on both of them. If I didn't know better I would say a brake job had been done very recently. (I've owned the car new so I know they have not had a brake job) However after reading many articles on this site I found a thread where one user said he was changing his front brakes for the first time with 110K on them and the pads still had 10K left in them. So the fact that my front pads are still pristine at 75K may not be a big deal (or not as big as I thought. Also I am not hard on brakes.)
However I'm not sure what is going on. Why would the passenger rear brake be metal on metal at 75K and the three other pads are like new. Is the passenger rear the only one working (or working much harder than the others) meaning the other three are bad? Or is the rear passenger bad and the other three are good? I have a working knowledge of cars but I am by no means a mechanic.
View 14 Replies
I picked my R up three weeks ago tomorrow. I took it in this morning because there has been brake noise from day one. The noise was a scraping, metal on metal sound that diminished a fair amount when the brakes were warm. I only got a very brief conversation with the service agent at the dealership this afternoon, and all he told me is that they had to order in new brakes. I don't know if it's just pads, or calipers or rotors or the whole deal! I'll get the whole scoop tomorrow.
View 5 Replies
The brakes were sounding like metal on metal. Three wheels in, some of the pads needed replaced but none were worn out. I got to the right rear wheel and the inside pad is worn to the bracket but the outside pad hardly looks worn at all.
I'm already replacing rotors, pads and calipers (I wasn't going to replace the rear rotors or calipers until I got to this wheel). Is there anything else I need to check because of such uneven pad wear?
View 14 Replies
I have a squealing noise that seems to be coming from under the car when going 25MPH or over. It doesn't seem to vary with the rpms of the motor or how fast I'm going - it's either on or off with out much variation in pitch. Sounds like a dry bearing, but it's baffling as it will happen every time I drive for a few days, then will inexplicably go silent for a while.
View 6 Replies
when i initially purchased "used " my 08 gs350 i had a problem with brake squeal. I kept taking it in to the dealer until they ended up changing front rotors , all 4 pads , and new shims .
Took my car into my usual mechanic to get an oil change. I knew i needed brake pads and he changed all four pads out for $350 .I am having a terrible time with brake squeal now. the mechanic is telling me that i have warped rotors and need to replace all four. He is telling me that he wont charge me labor, but the parts will cost $400.00 I goggled the cost of the parts and he isnt far off on the price . My concern is that his fix isnt the correct fix. Front what i can tell its the front rotors making all the racket.
What should i do ??I dont know if they re-installed the shims and have no idea what kind of pads were used . Thinking about taking it to the dealership and being done with it .
View 3 Replies
I am trying to get a sense on how prevalent this issue is. Getting brake noise when stopping? It is progressively getting worse, and my Treg has been in 4 times for that issue alone. My dealership, i think has sort of given up. They tried "grinding" the edges down as suggested by VWoA, no go...
View 24 Replies
I'm pretty sure I know what the problem is since when I hit the brakes it stops. When I took the left side tire off and right side I compared and there is a thin metal sheet that has room to move on the right, but is tight on the left. When the brakes were done before maybe it didn't seat correctly or something. Just wondering what that plate is called so I can order one and change it. Driven that way 2 years, but it bugs me when the window is down and people probably think my car is falling apart. Maybe I'll search for a brake diagram.
Edit: I think they might be called "anti squeal shims". I saw a picture of them, so maybe they didn't put enough high temp grease, but the left side is tight and the rights side you can move a couple milometers side to side so I'm sure that's the jingling noise.
View 13 Replies
On left turns, even just slight left turn, but mostly when weather is humid, I get a loud squeal that sounds exactly like squealing brakes, except I am not applying brakes. May not be relevant, but this is a minivan modified for wheelchair access via a ramp that comes out on the passenger side.
View 4 Replies
I have a horrendous squealing noise coming from one of my rear wheels. Sounds bad at low speeds, changes frequency to higher pitch when going faster. The sound isn't constant (some times nothing), other times loud as hell. Sometimes gets worse when turning, then nothing when straightened out. When breaking, sometimes the sound gets worse, then goes away. It doesn't sound like a bad wheel bearing (had one go before- more of a growly noise). This sound is too high pitched. Also, checked the brake pads (plenty of life left), and rotors are good too.
View 5 Replies
So I have a 2003 Passat wagon. While driving down the road with no brake pressure applied the front right brake makes a squealing noise. As if the caliper doesn't release pressure....what should I do? Any hints?
View 6 Replies
I have a 2008 GX and when the car is in drive and being stopped/held in place with the brakes, it makes a squealing noise, sounds like a loose belt but I don't think it is as it is coming from the transmission area, BEHIND the engine.
View 3 Replies
After replacing my brake pads and shoes I am hearing a squealing noise coming from the area near my brake pedal. This noise sometimes becomes high pitched if I depress the brake too hard. I am also losing a little bit of brake fluid if I depress the pedal hard several times. The brakes themselves function fine and have no problem stopping. When I bled the brakes today some of the fluid was black. I figured it might be air in the system but after bleeding them it is still happening. I also replaced the bleeder screws.
1997 Pontiac Sunfire 2.4L uses DOT 3 brake fluid.
View 6 Replies
Our 2010 Toyota Camry makes a squealing noise as we back out of our garage.Does this mean we new rear brakes?
View 15 Replies
2005 F-250 6.0 4x4. After about 50,000 miles on my original brakes, they started to make a squealing noise when applying moderate brake pressure and slowing down around 30mph-0mph. It only happens after Ive driven the truck about 30 mins. It must be warmed up. After 100,000 I decided to change the brakes.....they had plenty of life left on them, but I changed them anyway. I put on new rotors and pads and calipers in the front because one was hanging.
After about 10,000 miles, the exact same squeal has returned. With the windows down, its loud enough to physically hurt your ears if you are next to a car and the sound can bounce back into the cab. It sounds terrible. I thought it was the front brakes, so I took them apart this weekend to put in some Disc Brake Quiet. They pads look great, plenty left, the rotors look great, no grooves. Everything is tight. I relubed pins and brackets and clips. Today...same squeal still. I am at a complete loss here. It is some sort of harmonic squeal and the only thing I can figure is that the rears are the culprit. I have a drivers rear caliper that will hang and stick if you drive it really hard, so I am considering replacing the rear calipers too and do the disc brake quiet treatment there as well. Im not confident this will solve the problem.
Like I said, its so loud you can't drive with the windows down. Its a piercing squeal. Is there anything else that I can check? I can't imagine others don't do this. Its so loud and pronounced that it must be some sort of design flaw or something.
View 14 Replies
So starting yesterday, I noticed that my wife's 2008 Prius with 90 k, started to have a grinding, squealing sound coming from the left front wheel when making a hard right turn. It seems worse when there is more weight in the car (2 people vs 1). It does not seem to go away if the turn in on an incline.
I took off the wheel, checked the brake pads (look great and have at least 10mm of pad on both sides), looked form foreign material within the pads or on the rotor, checked the knuckle joint and just about everything that I could look at looked fine. I didn't see any leaking from the strut (the silver strap at the top was not gold as described in the DIY visual inspection post).
I am going to have to take it in, but I am wondering what are likely causes for this? I cannot tell, but I suspect that the inside guard of the front brake is rubbing on the rotor. Could this mean wheal bearing?
View 5 Replies
I heard some noise when the steering is hard. The noise sounds like squealing or scratching metals. What will be the problem? Is it the EPS system or just the serpentine belt slipping on the alternator?
BTW, the mileage is about 137700.
View 4 Replies
I commute 180 miles a day, 6 days a week. I noticed metal on metal grinding noise(more noticeable) at high speed above 75mph especially on asphalt road. I'm sure noise is there at low speed but not enough to notice. My car has 50,000 miles. Tires? Electric motor?
View 7 Replies
I got some coilovers installed last night, they are ksports. i have them on fairly low height as of now but i have noticed every time I hit bumps, I hear a kthunk (metal hitting metal noise) from my front driver side. is it from the coilover nuts itself or something wrong with my control arm? the sound ONLY comes from the front DRIVER side.
View 4 Replies
