Touareg :: MFT Message Check Headlight Range Control?
Jan 3, 2006
As the subject states, I got the MFT message: 'CHECK HEADLIGHT RANGE CONTROL'
Battery gauge = 14 solid
All other guages normal
Jan 3, 2006
Advertisement
Touareg :: Check Headlight Range Control Message On MFI
Received the MFI message "Check headlight range control"?
I have a 2004 V8 and the automatic leveling feature seems to be working correctly. If I stand in front of the vehicle, it appears that the headlights level themselves when the ignition is turned on.
I have noticed a couple times while driving at night that the headlights did not appear to be shinning down the road as far as they have been during other trips, so I'm thinking the problems could be related.
Touareg :: Headlight Range Control Warning Message Keeps On Appearing
It is a fairly new vehicle, Touareg SN 42xxx. It has two problems, which might be inter-related, both of which have defied all the repair attempts of a very competent and concerned dealership.
First problem: The warning message "Headlight Range Control" keeps on appearing. Much work has been done to try and fix this: Alignment of lights checked, suspension level sensors checked, vehicle inspected for damaged wires, etc. Later on in the process, both headlight assemblies and the instrument cluster were replaced. The message still appears.
Second problem: This is really minor, I only mention it because it might be related to the first problem. The instrument cluster trip computer (MFA) will not store accumulated mileage over a series of trips. In other words, if the car is stopped and started a few times, the trip computer will zero out.
Touareg :: 2005 - Getting Error Message Check Headlight Range?
I have a 05 V8. I have had in it 3 times in the last month for a bad headlight which was finally fixed now this error message popped up yesterday.
By the right I will not be taking my VW back to the dealer...
Touareg :: Headlight Range Control Warning Check
Lately every time I get into my 2004 V8 I get the warning check headlight range control. How to fix this or does this require a visit to the dealer?
View 1 RepliesTouareg :: Check Headlight Range Controller
1. What is the procedure in doing a basic setting for the xenon headlights ('04), what group (i.e. 001, 002 etc.)
2. How come I cannot delete/erase the DTC or error code (Headlight is not adjusted/MIL on, no basic setting.
Golf/GTI VII :: How To Disable Check Headlight Message With VCDs
I got the bec autoparts gti reps from Ed. I know HID's aren't perfect so sometimes they don't turn on but just turning the headlights off and then works to have them turn on. Whatever no big deal, but, every time it happens I get a check low beam headlight message that won't go away until I disconnect the battery terminal. So what I'm asking any trick with vcds to disable these messages. Idc to not have that caution. I just can't read German and don't know how to maneuver vcds.
View 1 RepliesTouareg :: Check Light Range Warning Shows Up In The Cluster
My friend got an 04 treg v6 and has that warning up on the cluster. How I can fix this? And does my vagcom cable for a mk4 work on a toureg, or is this canbus?
View 3 RepliesTouareg :: Check Lights Warning Message
My t-reg just show me "Check Lights" and I had check all the lights and can't find anything wrong with them... is this a common problem? All the lights and brake lights seems to work fine.
View 10 RepliesTouareg :: 2005 - Keeps Getting Check Lights Message On MFI?
I've got a 2005 Touareg V-8, 17,200 miles. I've got the xenon lights and the problem is as follows. I started getting the "Check Lights" message on the MFI. I checked the lights and everything was on and working. I took the car for service and had the dealer check it out. Of course the dealer couldn't find anything.
They checked for fault codes and didn't find anything. Once I left the dealership the message came back on so I turned around and went back to the dealer. I left the car on so that the fault codes would not clear. They instantly hooked the car up to there test equipment and found the fault code, the code indicated that the problem was in the left head light assembly circuit shown as B+ as the problem.
Since then they've replaced, the headlight assembly, the control module, the wiring harness and still today I've got the same "check Lights" thing going on. When the Check lights message comes on I loose my left light all together, the problem is getting worse and they don't seem to be able to find the problem.
Touareg :: Occasional Headlight Malfunction At Ignition When Set On Auto Control Mode
My passenger side HL occasionally doesn't come alive at ignition when the light control dial/switch is set on Auto mode. My dealer cannot duplicate the problem.
View 3 RepliesTouareg :: Lower Control Arm Bushing - Leaking Oil - Headlight Washer Isn't Working?
I took my Touareg in for an oil change. When the tech lifted it up, he called me and pointed our a bushing on the lower control arm which was leaking oil or some fluid. I touched it and it seemed like oil of some sort. It was like black or something near that color. He told me that maybe it was some kind of a hydraulic bushing and the seal had gone bad. The oil was not coming from anywhere else, but the bottom of the bushing.
I took it in to service and the tech couldn't really explain where the oil was coming from, but told me that that bushing did not have any type of fluid in it. While I had the Touareg in, the air suspension compressor finally got replaced. I feel like I'm actually driving a luxury car now. It feels so much nicer! That immediately got rid of most of my cabin rattles. Boy, was my ride bad before. That was in "comfort". I can't begin to describe how horrible it was in sport.
They replaced the dual horn, because mine went bad. They also replaced the wood trim on the driver side door. They kept ordering the wrong color. My original Myrtle was almost chocolate in color. The ones that they get now are much lighter. Just about all my wood has now been changed. The only problem now is that for some reason or another, the headlight washer isn't working. I'm wondering if they disconnected a plug while working on the horn.
So, after about a year, I've finally got just about everything done. Now all I need are new tires and an alignment. Speaking of alignments, I've noticed that my Touareg is the only vehicle I've ever driven that will continue to drive in a circle with the wheels turned, even when you let go of the wheel... while going forward. In other words, if you turn the wheel enough and accelerate, the wheel will tend to turn further until it locks. Other cars will straighten out as soon as you release the wheel, if you are going forward (not in reverse). Ok, there are 3 questions on this post: The deal with the bushing, the deal with the headlight washer and the deal with the wheel that doesn't straighten itself out.
Touareg :: Slow Cranking - Traction Control Module Flashing And Error Message On Screen
I purchased a 04 V8 with 22K miles. Very nice ride and huge upgrade from a Grand Cherokee. After noticing slow cranking, I took it by a dealer where we tested the battery. Electronics and battery tested OK. Dealer advised to lock the doors at night when parked in my garage.
I am still having slow cranking, and now experiencing the Traction Control module flashing and error message on the screen. ( It will disappear after I restart in a few minutes.) I am also experiencing a message that the computer is shutting down the consumer electronics.
Alternator showing 13.75-14 volts at first start up, returns to 13+ volts after 15 minutes. Cables, poor battery? I want it to start after sitting at the airport for several days.
Passat (B7) :: Key Is Not In Range Message - Engine Not Starting
Suddenly the doors are not responding to touching to open or close and the engine is not starting. Giving the message that the key is not in range. I checked both keys and same situation also changed the batteries in both keys and same situation. Suddenly it worked by itself and suddenly it went bad again. I checked the error log of the car i am getting 9-Cent. Elect. -- Status: Malfunction 0010 however in the detailed log no faults found.
View 11 RepliesPassat (B7) :: Key Not In Range Message When Start Button Pressed
Recently I went out to start the car with the key I typically use, and when I pressed the Start button I got the message "Key Not In Range." The key will lock / unlock the car, but simply won't start it. I've been having to use my spare / second key in the meantime. I haven't had a single problem with the car since I bought it Sept 2012.
View 6 RepliesFord 6.7L Power Stroke Diesel :: Got Message DEF Range 500 Miles?
I know that's a normal msg, but what has me thinking is the fact I've had my truck just over 2 weeks and it only has 1350 miles on it. My understanding is that a tank of DEF should last at least 5000 miles (service interval), which means either my delivery prep guys overlooked filling it or it using way more DEF than it should.
View 14 RepliesTouareg :: Shifting To Low Range Is Ok?
When shifting to LOW range is it ok to do this with the engine off. Like turn on the car but not with the engine on, as if to listen and make sure it sounds ok.
View 1 RepliesPrius (2010-12) :: Speed Range Of Dynamic Radar Cruise Control?
Is the drcc on the 2013 full-speed range or is it partial speed range? (will it bring the car to a stop or does it only work above certain speeds?)
View 18 RepliesPassat (B6) :: 2008 - Range Control Adjustment Motor For Automatic Leveling Headlights?
I have 2008 vw passat 2.0t.. I want to know, if my passat has a range control adjustment motor for a automatic leveling the headlights or automatic headlights, how I can get to know if the car has a that feature inside of the headlights.
View 11 RepliesTouareg :: 2005 TDI - Blinking Low And High Range Selector Indicator
My friend has a 2005 Tdi touareg (WVGZZZ7LZ5D053023). The low range indicator in the instrument cluster keeps on popping, the low range and high range indicator in the center console near the gear shift lever keeps on blinking at the same time. Driving the touareg was really slow, and the low and high range still keeps on blinking. There is no MIL appearing on the instrument cluster but scanning with VAG COM reveals this fault code below. I tried erasing the fault code but it keeps on coming back after a few seconds.
VCDS Version: Release 805.1
Data version: 20081223
Thursday,15,January,2009,14:30:13:39739
Chassis Type: 7L - VW Touareg
Scan: 01 02 03 05 06 08 09 11 13 15 16 17 18 19 1C 22 29 32 34 36
37 39 3C 46 47 55 56 57 64 65 68 69 6C 6D 6E 75 76 77
VIN: WVGZZZ7LZ5D053023 Mileage: 38400km/23860miles
-------------------------------------------------------------------------------
Address 22: AWD Labels: None
Part No: 0AD 927 755 AJ
Component: TRANSFERCASE 0100
Shop #: WSC 00000 000 00000
1 Fault Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Touareg :: Navi Unit - Go To Exact Address And Not A Range Of Addresses?
On our navi unit Is there a way to go to an exact address and not a range of address?
View 14 Replies