Touareg :: Lower Control Arm Bushing - Leaking Oil - Headlight Washer Isn't Working?
Mar 3, 2006
I took my Touareg in for an oil change. When the tech lifted it up, he called me and pointed our a bushing on the lower control arm which was leaking oil or some fluid. I touched it and it seemed like oil of some sort. It was like black or something near that color. He told me that maybe it was some kind of a hydraulic bushing and the seal had gone bad. The oil was not coming from anywhere else, but the bottom of the bushing.
I took it in to service and the tech couldn't really explain where the oil was coming from, but told me that that bushing did not have any type of fluid in it. While I had the Touareg in, the air suspension compressor finally got replaced. I feel like I'm actually driving a luxury car now. It feels so much nicer! That immediately got rid of most of my cabin rattles. Boy, was my ride bad before. That was in "comfort". I can't begin to describe how horrible it was in sport.
They replaced the dual horn, because mine went bad. They also replaced the wood trim on the driver side door. They kept ordering the wrong color. My original Myrtle was almost chocolate in color. The ones that they get now are much lighter. Just about all my wood has now been changed. The only problem now is that for some reason or another, the headlight washer isn't working. I'm wondering if they disconnected a plug while working on the horn.
So, after about a year, I've finally got just about everything done. Now all I need are new tires and an alignment. Speaking of alignments, I've noticed that my Touareg is the only vehicle I've ever driven that will continue to drive in a circle with the wheels turned, even when you let go of the wheel... while going forward. In other words, if you turn the wheel enough and accelerate, the wheel will tend to turn further until it locks. Other cars will straighten out as soon as you release the wheel, if you are going forward (not in reverse). Ok, there are 3 questions on this post: The deal with the bushing, the deal with the headlight washer and the deal with the wheel that doesn't straighten itself out.
View 8 Replies
Advertisement
my problem is this: my lower control arm bushing, front but (rear bushing) unfastens alright but i cannot get the bolt out no matter what i do. it just keeps spinning and will not come out the control arm has snapped itself so needs to be replaced. now is there a secret way (lol) to get this out iam about to become on nerve pills because of this lol. it just keeps turning on me and will not come out the other nut/bolt came out without any problems.
and from the manufactures book the actual gm book 375.00 paid for this darn book
anyway it says that these bolts have got to be placed back in from the inside (both of them) meaning they aren't supposed to be placed back one one way the the other way. a guy has told me its okay to be doing it the way where i place it back in to wiggle it back and forth to get it back in but the gm manual says to put both bolts back in the exact same way from inside the control arm out and the both nuts to be facing outside. and even when i took them both off the one was bolt end from the outside in and the other from the inside out? i have a 1997 3.1 front wheel drive. and i have only 1 lower control arm on each side
View 4 Replies
I am having an issue with the car not feeling stable on the highway or at speeds over 50mph when I am on a curve and go over a roadwork patch. The cabin of the car seems to float way too much to the side, almost like hydroplaining although the wheels stay put on the road.
After describing this to a mechanic, he said it sounds like my lower control arm bushings are gone. He looked at them and confirmed it, the rubber bushings that control the side to side action are cracked and worn out. He said that he is unable to just replace the bushing and has to special order the whole arm from the dealer (approx 200$ each arm).
I went to get a second opinion and another mechanic basically told me the same thing except the price on the part went down to 175 per arm with 2-3 hours labor.
View 4 Replies
I've got an 04 V8 and the headlight washer cover on the drivers side keeps coming off, I've lost three of them now. My dealer doesn't have an answer for me
View 4 Replies
I recently bought an 2005, 3ltr diesel Phaeton (though packed with options) in Germany. I drove it home and was, and am, in awe of the motoring experience.
As a fan of cars I am lucky to own a Opel Speedster (VX 220 in the UK) and a Buick Riviera Boattail from 1972. But the Phaeton beats all of them together!
But......my newly acquired Phaeton failed the technical control over here in Belgium due to the headlight washers (squishers?) not working (coming out of the bumper). Not even with the manual override through the control screen.
Dealer have checked every fuse, replaced on of the batteries which was not functioning properly (and was causing numerous 'power' errors). The car has been with them for two weeks now and I am getting desperate to drive my car.
View 12 Replies
I have a leaking washer fluid reservoir. Spews out under the car when I try to fill it up and then get the low washer fluid warning. Have always used washer fluid -20F formula.
View 6 Replies
Lately every time I get into my 2004 V8 I get the warning check headlight range control. How to fix this or does this require a visit to the dealer?
View 1 Replies
As the subject states, I got the MFT message: 'CHECK HEADLIGHT RANGE CONTROL'
Battery gauge = 14 solid
All other guages normal
View 4 Replies
Received the MFI message "Check headlight range control"?
I have a 2004 V8 and the automatic leveling feature seems to be working correctly. If I stand in front of the vehicle, it appears that the headlights level themselves when the ignition is turned on.
I have noticed a couple times while driving at night that the headlights did not appear to be shinning down the road as far as they have been during other trips, so I'm thinking the problems could be related.
View 1 Replies
I noticed a pool of very clear oil on my garage floor. Looking under the truck I can see the lower control arm on the front drivers side covered in fresh oil. It looks like it's the shock absorber leaking. I just rolled over the 4,000 mile mark. I'm dreading taking it in to my nearby dealer. This is most likely a week long fix with how they operate. 2014 FX2...
View 2 Replies
It is a fairly new vehicle, Touareg SN 42xxx. It has two problems, which might be inter-related, both of which have defied all the repair attempts of a very competent and concerned dealership.
First problem: The warning message "Headlight Range Control" keeps on appearing. Much work has been done to try and fix this: Alignment of lights checked, suspension level sensors checked, vehicle inspected for damaged wires, etc. Later on in the process, both headlight assemblies and the instrument cluster were replaced. The message still appears.
Second problem: This is really minor, I only mention it because it might be related to the first problem. The instrument cluster trip computer (MFA) will not store accumulated mileage over a series of trips. In other words, if the car is stopped and started a few times, the trip computer will zero out.
View 24 Replies
My passenger side HL occasionally doesn't come alive at ignition when the light control dial/switch is set on Auto mode. My dealer cannot duplicate the problem.
View 3 Replies
I don't use them much. Might not have used them since the truck was vag'd, they don't work,...fuse? Washer fluid low disables them )I don't know if it does, but I had a car that wouldn't let the headlamp washers run if the fluid was low).
View 5 Replies
I'm pulling my control arms to replace the bushings (they were completely split) and I'm trying to get the right one off. How the heck did you get the boot out on the front passenger side?! See pics. The bolt jams right up to the oil pan. The only way I see it is to remove the pan. Is this right?!?!
View 6 Replies
Any hints on a easy way to change these.
After I have the wheel off do I need to disconnect the upper ball joint to remove these. It looks like I can just remove the two nuts on each side and use a jack under the rotor to support the weight. It looks like it might shift back and forth enough to get them out/in.
Will this work?
View 14 Replies
Alright, after taking everything off and replacing all the joints/bushings, I am left with the control arm. (it hasn't been easy either)
I am at the control arm (Passenger side) and i got the rear bushing loose. I managed to brake the front one loose, with a lot of force, but it spins. I see in HMA that it has a bolt, or so it appears, but how on earth do you get to that?
View 13 Replies
I want to disable my headlight washers when my headlights are on?
View 1 Replies
Fixing a jammed headlight washer cover? I know the washer itself works because I see washer fluid on the ground and I can hear the motor whirling. Also when I access the maintenance item on the infotainment center, the left washer cover pops out, but not the right one.
View 1 Replies
What is the volume of the screen/headlight washer reservoir and at what level the low fluid warning lamp first appears?
View 3 Replies
The bumper cover on my car was replaced due to deer damage. I just noticed the headlight washer covers don't retract themselves all the way unless I give them a little push by hand. Can this issue be fixed?
View 1 Replies
Where to find the headlight washer pump fuse. My owners manual does not list it for some strange reason.
The washer heads both extend OK using the service button, but when I pull the washer stalk only one (RHS) pops out and no fluid comes out, so I am guessing the washer pump has stopped working.
View 9 Replies