Touareg :: Little Clunk Whether Forward Or Reverse When Moving From Dead Stop
May 4, 2005
i am wondering if any other touareg v-10 owners have experienced what i call "slop in the drivetrain"?symptoms: when just crawling off from a dead stop and then letting off of the pedal i can both hear and feel a little clunk whether forward or reverse. its real subtle but its always there if you listen for it. Is this just what they call normal "slash" of the worm gears in the differentials? i would hate to find out later once warranty's gone that i should have done something about it earlier? i have 19,000 miles on it, 70%highway and 30% city driving.
View 5 Replies
Advertisement
The car is manual, 95.000 KM. The problem is everytime i put the car in gear and start rolling, I hear a loud thump/clunk coming from the underside of the engine.
The only mods on the car are intake, a tune and a dog bone insert. The clanking is way more apparent when i'm in reverse. Whether i'm backing out of my uphill driveway or on a flat surface, EVERYTIME the car is at a dead stop and I give it throttle, something clanks...
My mechanic had lifted the car. He thought it might have been suspension, but he ruled that out. He believes that it is in fact the dog bone insert that is faulty. Upon further inspection, the red insert (from USP I believe) had cracked. although the insert was visibly broken (I've had it for barely 5000 km's, WTF) I'm not entirely sure that that is what's making the clunking sound because that sound was there from before I had put the dog bone insert in place.
View 2 Replies
I just installed new coils, front and rear control arm bushings, and ball joints. I had some noise before the install, but after it was all good and quiet. Now, I have a clunk during braking hard, and I've noticed a clunk upon moving forward. In my mind I would think the mounts are going bad. 140k, and i'm not sure if they've been replaced before. I do know the dog bone has an insert.
View 6 Replies
Yesterday I reversed my 1996 Subaru Outback (manual transmission) out of a perpendicular parking place on a hill, swung around forward and coasted down the hill. Near the bottom, I let out the clutch out without realizing I was still in reverse gear. It made a not-so-awful noise (sounding rather like engine braking) and I very quickly put it in neutral. I immediately smelled a fairly strong gasoline/exhaust aroma and the engine stalled.
The Subaru restarted without trouble, but the check engine light was on. Everything appears to function normally now, and I've reset the engine light by disconnecting the negative terminal of the battery for a few minutes.
Have I likely damaged anything? Is there anything I should check? Should I have tried to read the diagnostic code?
View 5 Replies
OK, this is the second time I noticed this. I'm at a stop light, looking around, suddenly, I notice I am slightly moving forward. Is my foot (on the brake) just too relaxed, or what? I have never experienced this before in any vehicle.
View 14 Replies
Passat moving forward very slightly every few seconds while stopped with auto stop button engaged? It happened twice to me today on a flat surface.
View 7 Replies
I'm getting some vibrations from my '06 2.0T. The car tries to jerk forward at a dead stop, RPMs jump about 100-200RPM. It kinda feels like stalling a manual transmission, only milder. The car is burning a bit more oil than it should.
Many claim it could be a faulty PCV Valve. Since I'm a little on the broke side and my car is out of warranty, what should I look for to tell if the valve or the hose is faulty?
View 4 Replies
My 2001 F250 5.4 has started to make a screeching sound. It only happens when it is in gear (auto) moving forwards or in reverse, and increases in pitch relative to engine speed rather than road speed, and is much more noticeable under mild to moderate acceleration. Maybe I actually mean transmission input speed?
When simply maintaining road speed, it is almost silent. Anyway, if I drop it into neutral while driving, the sound stops, and starts again when I put it back into gear.
From the drivers seat and with the windows closed, it sounds as though it is coming from the engine bay at steering column height, although this is really tough to gauge while actually looking where I am going. With windows open, it comes from both sides of the vehicle.
1st thought is tranny......
2nd thought is a water pump bearing, although there are no apparent cooling problems or leaks.
3rd thought is the alternator bearing, although there are no charging problems.
I say alternator because I recently changed the serpentine belt and noticed that the alternator made a very faint screech-like sound when spun without the belt on it. The main screech was there before I changed the belt. Maybe it gets really loud under load?
So I'm kinda scratching my bean and wondering what expensive piece of mechanics I'm going to shell out for next. If it's #2 or #3, I can do those myself, but if it's #1.... it likely means more money than I have to spare.
I did wonder about removing the serpentine belt and driving a very short distance (end of the driveway and back) to see if I can remove the pulleys, tensioner or other belt driven parts from the equation. Maybe this is not such a smart idea. I'm somewhat at a loss right now.
View 2 Replies
I have a problem. 2002 F-350 4R100 tranny. Put a reman transmission in about 30000kms ago. pulled excellent with no problems. shut it off for night. In the morning it had absolutly no forward and a little bit of slipping reverse for a few minutes now it is totally dead. No movement either way. The OD on off flashed a few times but not anymore. Put a Genisys scanner on and no codes at all. What could be the issue?
View 14 Replies
I've had my truck start making a nice CLUNK from the vicinity of the rear axle when starting moving from a standstill. (and it's a pretty decent thunk sometimes, you hear it AND feel it). I called and made an appt to bring it in and have it checked out (also having the first oil change done and gonna see if they can figure out why the automatic headlights are almost always on even on a bright sunny day) ...
View 14 Replies
I have a 2009 F150 4x4, XLT crew 6.5' bed, 5.4 engine. The truck has a very strange erratic throttle behavior from a dead stop through low speeds, shifting seems very strange at low speeds too.
Dealer tried re-flashing the computer, but that didn't fix it. They talk about some valve that sounds to me like it's similar to an EGR function, but I cant remember what he called this valve. He explained the issue as exhaust gasses that are to be recirculated and burned, but the valve is opening at the wrong time, or stuck open or something so it feeds the fire so to speak.
Does any of this sound typical or common? Is this something that's hopefully easier to do than a spark plug change on a 5.4?
View 4 Replies
Slight clunk feeling from dead stop under more aggressive acceleration...my 14 250 AWD has done this on 3 or 4 occasions.
View 14 Replies
Ive got a 04 f350 that after u shift into 4hi or 4lo when u accelerate it it makes loud clunk noise in fwd or reverse hi or lo. With hubs unlocked it still clunks. Have checked, wheel bearings, axle U-joints, and driveshaft joints all good. So I am thinking I've got issues in t-case. Popped drain plug out and wow that dex merc 4 looks nasty. So thinking I need exploded view of transfer case.
View 4 Replies
2010 F150 XLT FX4 5.4L Crew Cab Medium box, nice blue truck, lacking on chrome though.
My friend has a clunk/lag on take off from a dead stop only. Drives fine down the road, but when taking off from a complete stop, you step on the gas, and nothing happens for a second, feels like it lags, then clunks, gives a jerk, and takes off.
From talking to other newer Ford owners, seems like a common problem.
View 9 Replies
As I said when I take off from a dead stop I can feel a clunk or a bump that feels like it is coming from the rear wheels. I can feel it more than I can hear it, although I can hear it a little. It is difficult to describe this. It is only for a second and kinda feels like the rear wheels have no traction then it bumps and takes off. If I ease into the accelerator I can avoid it, but I don't have to hit it real hard at all to get it to do it. I am sure it is not u-joints as I put a brand new drive shaft from driveshaft specialist on in the spring.
View 3 Replies
I have a 2002 F-250 7.3 Powerstroke 4x4. My truck has developed a "clunk" for lack of a better term when accelerating from a dead stop. It is not a shudder as it only happens once within a few seconds of depressing the accelerator and then goes away until the next time I stop moving.
It feels like either something in the drivetrain is not engaging right away, or something is releasing, like a stuck caliper or something. From the way it feels and what I've read so far about the TC/Trans, I'm assuming it is something worn in the drive-shaft/rear diff.
But it needs brakes badly (already have all new rotors & pads ready to install) so maybe a caliper is sticking when depressed and then popping loose under initial acceleration? I think this is unlikely but possible.
View 12 Replies
So I noticed my Treg makes a clunk when I break when backing up. If I hit the gas, then brake, 'clunk'. Sounds like its coming from the rear or undercarriage. Hopefully not serious but its going in for service soon.
View 10 Replies
I get an audible 'clunk' whenever I brake while in reverse. The sound reminds me of my old 4X4 when I would back up to take it out of 4 wheel drive. I searched for some existing posts but didn't get the keywords right or they don't exist.
View 21 Replies
While this is not for my Touraeg but my 2006 Passat, I cannot get the seat to adjust. It keeps moving back to some default position.
View 2 Replies
Have a 2006 V6 with 800 miles. Recently shen I am starting from a stop the engine bangs and kind of makes a knock. I am currently using 93 for gas...
View 1 Replies
I recall some folks (with certain VIN#s) getting a TSP for correcting the lag when accelerating from a dead stop. I asked my dealer about it during routine service several months ago, but no fix at that time.
View 1 Replies
