Touareg :: How To Remove Headlights To Replace Bulbs
Aug 8, 2007
How do you remove the Touareg Headlights to replace the light bulbs. I have fount the open close turn, but that doesn't release them all the way.
View 3 RepliesHow do you remove the Touareg Headlights to replace the light bulbs. I have fount the open close turn, but that doesn't release them all the way.
View 3 RepliesI just bought new DS1 8k bulbs to replace my aging 6k bulbs. It was a sinch to install and seemed too good to be true. Well i turn my car on and the check bulbs light came on and low and behold the lights do not turn on. The dealership said it would not matter whether I had 6k before and bought 8k but it seems like this might be the issue.
View 4 RepliesHow to replace one of the xenon bulbs.
I know the type of lamp to be used: D1S 12V35W.
I looking for a exploded view/instructions how to extract the front lamp units in order to replace the bulbs.
What are the steps involved in replacing my fog light bulbs? One burned out. And what's the correct bulb replacement number?
View 5 RepliesAlso looked through our manuals and saw jack. Looked at the inside of the rear hatch and saw no easy way of replacing the rear tail light bulbs. I'm guessing that i would have to take out the plastic and/or carpet to get to it?
View 6 RepliesHow to replace the fog light bulbs on a 2015 IS250? Or is it even possible? I called the dealership, and they didn't know the bulb size. In fact, he said they were LED bulbs. Is there a DIY for replacing the fog lights?
View 7 RepliesI'm trying to change my license plate bulbs to LED but cant figure out how get to the bulb. I've already removed the carpeted cover but cant seem to figure out how to get the bulb out..... 2007 ES350....
View 3 RepliesHeadlight bulbs. So I am looking to replace my bulbs because mine don't seem to have that great of light output. I am not sure if it is the actual headlight or if it is just the bulbs? Is it possible to just replace the bulbs and get better light output? I am not sure of the brand of headlights I have but I am pretty sure they are some cheap aftermarket ebay headlights. I want to replace the headlights in the future but for now I was wondering if I can get away with just replacing the bulbs. When selecting the bulbs, are they all pretty much universal or do I have to buy specifically for the type of headlights I have?
View 10 RepliesI have read several threads about replacing them with LED's (which is what I am doing), but I cannot figure out how to get that plastic cover out!
I don't want to just start jamming the screwdriver in randomly, as I will probably crack something.
Just picked the Explorer up from the shop getting a new radiator. This question has nothing to do with the radiator, but the fact that the mechanic was not gentle on the drivers door like I've learned to be. Now, the door wont latch. It will close and lock, but still reads DOOR AJAR. The thing is, there is no way to keep the interior light from staying on...except to disconnect the battery. Until I can get this fixed, can I remove the bulbs from my interior lights, or will the battery still run power to them even without a bulb? Trying not to disconnect the battery everytime I park.
View 10 RepliesWant to replace my park light bulbs (the wedge bulbs housed in the high beam lens) with leds but unsure how to get these things out? They have a black plastic tab on the back of the bulb fitting which I assume is to aid removal but do you need to twist then pull or just pull straight out? They look rather flimsy so don't want risk breakage ...
View 8 Replieshow to replace the bulbs in a 2010-2013 Toyota Corolla I am finding older Corollas but not 2013. I did tear apart the dash but it look like they are now a self contained unit.
View 3 RepliesI am replacing my low beams every couple months ever since I replaced my oem bulbs with Silverstars. Sometimes the bulbs last for a few months and this last time they lasted only 30 days or so.
View 7 RepliesGot the light bulb symbol in the tach this afternoon. After checking it out, the LR inner bulb seems to be out. Am I correct in assuming I have to pull back the carpet, then remove 2 nuts/washers, and then remove the taillight lens/housing to replace the bulb? Any recommendations on bulb or just stay with OEM? My R32 has 88K+ miles and this is the first bulb to go...
View 5 RepliesI was just wondering if there was a write up on how to swap out the headlight bulbs.
View 4 RepliesI'm trying to lower the rear part of the headliner so I can replace a broken antenna base. I've read the detailed photo instructions posted on this site. I've been able to dislodge all of the parts covering the rear section of the headliner, including the dome light, but I can't get enough clearance unless I also remove the two rear grip assists. I'm flummoxed trying to remove the grip covers and sub-assembly. The official instructions are confusing, and the dealer tech could not explain it in a way I could understand. See attached diagrams. I can't figure out how to use the screwdriver to release the grip covers.
View 1 RepliesWhen the water pump goes bad do you have to remove the engine to replace it?
View 2 RepliesI need to replace the rotors and calipers on my 04 accent gl. I noticed there are 5 bolts on the back of the caliper. I know one is for the flex hose connection. Then there are 2 big hex bolts closest to the dust plate. Are those for the caliper mounting bracket? and if so will they need to be removed? Then the final two are on the outer edge, however the top one is rounded and rusted, is this normal? The one on the bottom is a hex. So what needs to be removed to change the rotors and pads? I also notice that there are two screw holes in the rotor, that I guess snug it in place against the hub, however the screws are missing. Is this bad? are they needed? and if so can I get new ones?
View 10 RepliesHow to remove and replace a busted lock cylinder. My wife's car got broken into and used something that punched in the driver's door lock cylinder. VW wants top replace a new lock cylinder. I've been able to remove the drivers door panel but I wasn't able to figure out the final steps.
View 1 Replies2008 Wagin .... Specifically, how do I remove the reflector plate that hides the bolt?
View 3 Replies02 Camry, how to I remove the burnt license plate bulb? Took off the underside trunk carpet and disconnected bulb harness, but I don't know how to remove the plastic piece that holds the bulb in place. Does it pull out, or twist out? I don't want to break it!
View 1 Replies