I can see where there is a 1/4 inch post that if turned will push the assembly out, but i can only get it to come out about 1 inch. Is there something else that has to be released ?
View 2 RepliesHow do you remove rear turn indicator assembly so bulb can be changed?. Specifically is there another screw besides the two on the end of the assembly. Once the two are removed the assembly is loose but something is still holding the assembly.
View 2 RepliesI have a 2016 Camry SE.
How do I pull out the map light assembly? The whole thing not just the bulb covers.
I tried pulling from the rear but it won't budge and created a crease in my headliner.
Is there a certain way to pull it down? I don't want to damage the headliner anymore since it's not even a week old yet.
I'm doing an install on my son's 2000 passat V6 30 valve.
I have the front rad pulled out and there is plenty of room to work. How do I get off the viscous fan assembly. I removed the fan's 3-4 allen bolts, I now need to get the assembly out. I also removed one of the long allen bolts in the actual assembly. I have the fan ribbed pulley secured with an old serp belt and grip wrench. I am trying to losen the large nut behind he fan assembly. I have attached a photo to point of reference. I may have a manual next week yhat may explain all this.
What are the steps to remove the left side vent assembly? The hinge is broken on my wooden cover and poking around I can't seem to get the whole vent assembly out.
View 2 RepliesMy headlights suffered from the dreaded condensation problem. I brought them to Lexus after getting the warranty enhancement paperwork and had them replaced. Shortly after the passenger side wheel cover was ripped off after getting caught on some ice during a storm. It was very shortly after that that condensation begin appearing in my passenger side headlight.
At that point I was unaware that the wheel well cover had been ripped off. I brought it back to Lexus to have it looked at since I only had the headlight replaced a few weeks before. I was told it would be at a cost of $2,500 to replace with an additional $400 for the wheel well cover. Needless to say, I did not have the work done that day. While I was waiting them for them to finish the paperwork I bought the wheel well cover for $50 online but since then I've had difficulty locating the headlight.
I brought it to my mechanic and he was unable to find the headlight as well. I have a 2009 rx350 with HID AFS headlights. I have looked on ebay, Amazon and just through the internet to see what I could find but I'm finding only halogen headlights. Most of what I'm seeing on eBay are for non-adaptive lights that are damaged.
I'm trying to replace my dads 2007 Camry XLE japan built headlight assembly because his are insanely oxidized. Besides OEM's and CAPA's, what else are there? Any good aftermarket headlight assembly and achieve great results?
View 8 RepliesNew owner of a 2000 Passat. The headlights are dingy on the inside and I would like to be able to clean them. How I can get to the inside of the headlight assembly? Can't stand the look of them like this!
View 13 Replies2008 Wagin .... Specifically, how do I remove the reflector plate that hides the bolt?
View 3 RepliesI've removed 3 bolts ( Headlight assembly removal)and loosened the number cover to be gridlocked by something I cannot see or just a bit more friction than the amount of force I'm willing to give for fear of breaking something.
View 9 RepliesI am in need of replacing the passenger side Front Headlight assembly. I was wondering, how to assemble it outside of a repair shop. I was also looking to possibly get the part number so I can make sure I am purchasing the correct product for my 2012 VW Passat SE.
View 8 RepliesThe drivers side headlight assembly on my 2008 Prius has moisture in it. I have 52,000 miles on the car, so I do not think it is covered under warranty. What / how can you replace the headlight assembly?
View 7 RepliesIs it hard to remove the headlamp assembly. I am only asking because i am considering purchasing smoked/blackened headlamps and tailights on ebay.
View 14 RepliesI have a 2001 Excursion and I need to replace my headlight assembly. What is the difficulty level of replacement? Any recommended assembly they would suggest that throws out some great light?
View 14 RepliesHow do you remove and reinstall just the lens in the rear light assembly in 2002 SC430 ? I can see that it probably just snaps out using a screwdriver as a pry tool but want to be sure !
View 5 RepliesSo car not turning over after replacing (right side) headlight assembly. Was turning over prior. Replaced the battery, same result.
View 4 RepliesSeveral weeks ago someone backed into my '97 RAV4 in a parking lot. Body shop charged around $900 for the repair (estimate indicates labor for both headlights, but doesn't look like they replaced them). This afternoon one of the low beam headlights burned out. I went to change both sides just to be safe. On both headlight assemblies, grasping the wire assemblies to the low beam bulbs, the headlight assembly on both the left and right side is loose within its housing. I've changed the bulbs in the past, this is something new. Take it back to the body shop? What happened????
View 7 RepliesA few weeks ago my 2010 Prius was involved in a minor front end collision. The car has since been repaired. Today I noticed that the passenger side headlight assembly (which was replaced) doesn't seem to fit quite right. There is a small gap between the assembly and the body panel at the most extreme point on the side of the car. Is this just a cosmetic issue, or could water seep in at the location and cause internal damage?
View 1 RepliesI have a broken headlight adjuster assembly, it's a steel bolt with a Plastic nut on it, the Star piece behind the nut is broken. What is the source for this part ?? A Ford part number????
View 4 RepliesTried to remove my rear interior light assembly up on the headliner but just couldn't figure it out. I can pry the clear lens off pretty easy but I want to remove the whole assembly from the headliner so I can put some sound deadner behind it because ever since I upgraded my sound system it rattles like crazy and is driving me nuts. I know guys have dropped the whole headliner to dynamat or sound proof it so someone's gotta know.
View 2 RepliesPassenger side parking lamp burned out in the headlight assembly. Have tried to pull rubber boot off the back of lamp assemply but I can't get my hand back in their to reach the parking lamp. If I have to pull the headlight assembly out from the car.
View 3 Replies