When I try to connect to module 9 via vag-com to add DRL and TPS to my menu I keep getting the error on my laptop. How can I fix this? Also how do I remove the acceptance screen from an '06 DVD NAV?
View 4 RepliesI have an 04 V6, yesterday it was perfectly fine...last night we had torrential down pours, high winds and standing water... not sure if any of that matters, but this morning I went to take the kids to school and my "BRAKE" light, the ABS light, and the exhaust lights were all on. Took it to a local shop and had them check for codes. They said it was U0121... lost communication with ABS module. What should I do? I drove it a couple of miles back to the house and again earlier this evening to see if anything felt different, but all seems the same.
View 2 RepliesI've been using my HEX+CAN and VCDS a lot lately, and find that a lot of the time I get many communication errors. This makes some things, like looking into the measured blocks on the engine controller nearly impossible. Very close to impossible. Could barely find out that my second MAF sensor was bad (replaced, now.) Is this standard for Phaetons, or is this just me?
I am using Mac OS X 10.8.4, with Parallels Desktop 7 running Windows XP SP3 x86. It occurs with both the latest stable and beta versions of VCDS.
This is a 2008 Prius with no check engine light or other operational issues. The car runs fine. When doing a health check with a Techstream scanner (new toy), it shows the code U0073 along with U0123, 124, 126, and 293. Need to further diagnose what may be wrong?
View 7 RepliesI just installed a Tekonsha Envoy trailer brake. I bought the VW wiring pieces and connected it to the factory under-dash plug. The problem is that when this is connected and the trailer is hooked up the green light should illuminate on the Envoy controller. When I have the trailer hooked up, there are no lights lit and the trailer brake unit just seems dead. This is a brand new Envoy.
View 2 RepliesI recently had a new TPM Module installed by the Dealer. Today before loading one of my 19" Summer Wheel/Tire with a TPM sensor into the back, I went into the menu to turn off the TPM system, and there is no option to turn it off.
So I loaded the wheel/tire into the back, and took my chances in getting an error message in the MFI. But to my surprise, I did not get any error messages.
What gives? Can I get the option back in the MFI with a Vag, or does the new module just not have the "off: option? And why didn't I get an error message with a fifth wheel/tire with a TPM sensor laded in the Treg?
I have someone with a VAG-COM coming into town to disable TPMS, but I cant get my tpms module disconnected. I can feel the wire harness, but I cant figure out how to release it.
View 7 RepliesI had a leaky sunroof issue over the weekend. I was driving in rainy weather on I-80 in Sacramento and water started pouring (very steady drip) out of corner of the compass module on Saturday. A few minutes later it started dripping out of another plastic seam towards the rear view mirror.
The head liner also started getting saturated near the compass. I took it to the dealer Monday to fix some other issues, and they said they could not replicate the leak problem, but that they did blow out the drain plugs. I guess my question would be, even if the drains were blocked, how would water get down the head liner and into the compass area?
I look and it appears that the only holes in the sunroof tray are on the sides, which I assume are the drain holes. Did my dealer really do anything by blowing out the drain holes? Additionally, I have only had my Treg for 2 months and have not used the sunroof much due to the weather this year.
Where is the LCM located in the T-Rag?
View 1 RepliesOn the way to lunch today, I stopped at a store and ran in for about 10 minutes. When I get back in my 'egg, I notice that the steering wheel airbag module has "popped" or "sprung" out of place. Instead of being flush, it is now sticking out and creating quite the safety hazard, I'm sure.
View 15 RepliesI recently received an airbag fault light so I figured that I would scan the module for error codes. This is what I came up with:
Control Module Part Number: 3D0 909 601 C
Component and/or Version: 05 Airbag 8.4E++H01 0352
Software Coding: 0012341
Work Shop Code: WSC 31414
Additional Info: 7L0959339B BF-Gewichtsens. 005 0006
Additional Info: Geraet 00000
2 Faults Found:
01217 - Side Airbag Igniter: Driver Side (N199)
001 - Upper Limit Exceeded - Intermittent
01316 - ABS Control Module
004 - No Signal/Communication - Intermittent
Has scanned the car while had the airbag fault present and if so, is this the usual harness that needs to be changed?
Access start module (kessy module) is acting up, not complete shut down. The 04 Touareg now only opens when you use the remote key button. I have tried to locate a used one...
View 3 RepliesHow to recode in gateway park assist because someone in the service I thought didin;t mark this option and now I didn't have got pdc in my car even though that I have physically this module in my car and formerly it was working. And another question is : Is it possible to close a windows and sunroof from the key remote control for example when I close my car I want that all windows will close automatic when I press the unlock button on key....
View 1 RepliesI had the differential control module recall/flash performed last week and now the car makes a whining noise at speeds north of 35mph. The noise seems to emanate from the front of the car (near the radiator). The dealer was able to hear the sound -- and unable to diagnose the problem. They reflashed the stepper -- and the noise remained.
They moved the stepper motor, drove the car -- and the noise remained. Finally, they put the stepper back in -- reflashed it -- and then the noise went away. Subsequently, I drove the car noise-free for about 250 miles (over several days) -- and then the noise came back. I'm also having the same problem that others report about the tight-radius binding when turning (which the flash was supposed to solve).
questions:
1) any experience of whining noise after the flash recall
2) i see that some had the stepper motor replaced...what was the underlying reason?
3) it seems that the stepper is the problem -- but could it really be the differential that's not keeping the right ratios?
Before some days I couldn't open sometimes the doors with the keyless access. I have to try two or three times till the key to be recocnized. I changed the batteries but the problem still remains. Now I cannot even start the engine I receive the message "Key Not Found" ... This could be a faulty antenna or the Kessy Module?
View 6 RepliesI purchased a 04 V8 with 22K miles. Very nice ride and huge upgrade from a Grand Cherokee. After noticing slow cranking, I took it by a dealer where we tested the battery. Electronics and battery tested OK. Dealer advised to lock the doors at night when parked in my garage.
I am still having slow cranking, and now experiencing the Traction Control module flashing and error message on the screen. ( It will disappear after I restart in a few minutes.) I am also experiencing a message that the computer is shutting down the consumer electronics.
Alternator showing 13.75-14 volts at first start up, returns to 13+ volts after 15 minutes. Cables, poor battery? I want it to start after sitting at the airport for several days.
Took my 99 XLT super cab to a Ford dealer to have a new key made (I have only one so can't do it myself). I was told the PAT (Passive Anti-Theft) module wouldn't communicate with their system.....
As I understand it, the PAT module communicates wirelessly to the key module under the steering column. Since the PAT module is obviously working (the truck cranks, starts and runs fine). What are they talking about?
Mine Door controller started out minor - randomly it would try to roll up the window multiple times when it was already closed, and I'd get "intermittent signal" errors from vagcom. I told the dealer about this, and they didn't want to fix it, and they tried to blame my C2 ECU flash for the door controller problem, possibly because there wasn't anything obvious wrong with it other than the VCDS errors.
Now it has decided to wig out totally - when I open the driver's door, a good 50-70% of the time the car thinks the door isn't open. The MFD doesn't light up, dome light stays off, fuel pump doesn't prime. Open the passenger door and the MFD does display and dome light turns on, but the driver's door will still show "closed" even though it is standing wide open.
If I don't start the car quick enough and I have no passenger, it will re-lock (since it thinks nobody ever opened the door). Weirder still, if I pull the interior handle with the door open, it will usually light up the MFD and show the door open, but only briefly - when I let go of it the door shows closed again. However, sometimes after pulling it a few times it "fixes" and the MFD will show open correctly and the door is fine, for a while...
It has not yet gotten stuck in an "open" position, as that would mean I couldn't lock the car.
2015 Golf TDI s model. When I try to use a SD card absolutely nothing happens. No errors, no reading, like I have put nothing in the SD card spot directly below the CD player in the glove box. On all the radio menus the SD card is dimmed as if nothing is in there. I have tried 4 different brands and sizes of SD cards, different formatting options, different files, still nothing. The iphone cable works fine, so does bluetooth and the CD player. No error codes either with VCDS. I have tried complete resets of everything but no luck.
View 9 RepliesI was recently driving along the highway when I hit a small dip in the road (nothing serious, i drive over this everyday) and all three of the lights mentioned in the subject line came on. Nothing physical otherwise was noticed, as far as I could tell the car drove and has driven the same since.
View 5 RepliesToday I was driving to my office and suddenly my a/c stopped cooling. I reached my office nd parked the car. 5 hrs later I got the car from parking and everything worked fine. Again about the same distance a/c stopped cooling. And 2 mints later, following signs came on and I have taken the pictures. I am wondering what is about? Love prius but don't know japanese.
View 14 Replies