How to step by step adjust the low beams. I looked at trying to do this and haven't got a clue. Do you need to remove the whole lighting unit or is there an adjustment screw you get to by feel, because you aren't getting in back of the light assembly from the engine compartment, maybe remove the wheel well guards? I think i'm in the market for a service manual. My motto is If it aint broke...........fix it until it is!!!!!
View 7 RepliesWhen I have it set to comfort, it will adjust up and down at just about every other redlight. Also when I get out sometimes the front will go down. Not leaking or anything there is a electro-mecanical type noise heard and both sides of the front go down the same amount. Is this normal?
View 8 RepliesI believe it is a great feature to automatically adjust the side view mirrors downward when the car is put into reverse. One question, Does the passenger side mirror the only mirror which adjusts downward? My drivers side mirror does not move at all.
View 4 RepliesI just took my '05 Treg into the dealer to adjust the headlights because they were not level. The passenger side was about 5" lower that the driver's side in 10 feet. I have the bi-xenons. At night the low beams are way to low.....can't drive more than 25mph safely!
How do I adjust these myself?
How to adjust the Headlights on a 2006 Touareg. I am importing my US Reg Touareg to the UK and need to adjust the beams to UK Road Regs...
View 1 RepliesHow to adjust the low beams on a 2004, the MFI is telling me they are out of range?
View 1 RepliesWhen driving at night I often get high beams flashed at me by oncomming traffic who mistakenly believe I'm running my high beams. I thought the headlights (xenons) were self levelling. Do I need to adjust them?
View 22 RepliesI experienced abnormal behaviour of the xenons (I think).I thought that when all lights were off (no DRL's or what so ever), and I flash the high beams (pull the left lever towards me and release) that I'd see the halogens only and no xenons, but apparently the xenons are flashing as well.
I know there's a mechanism in front of the xenon bulbs that covers the normal xenon beam partly for the normal lights, and gives you the full beam when high beams are on (the thing called "Bi-Xenon").
But I thought the xenons are not supposed to come on just for flashing if the normal lights are not already on, because the lighting of a xenon bulb is not fast enough.
I know the instructions are somewhere, but I am having trouble figuring out how to change the headlamp bulbs (high & low beams) on the easy side-driver side. Do I need to loosen the headlamp assembly or can I just go into the headlamp assembly without removing it?
View 3 RepliesMy truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesI have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
I want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.
Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!
P.S. 2005 Toyota Camry
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesI have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 Replieshow to do this... The brakes can be down to the ground doesn't always hold on a hill. Plus it pushes down too easy in my pinyon
Sent from my SPH-D700 using [URL] Free App
My mother just bought a beautiful 2002 Passat 4motion Wagon.
But, the only thing we can't figure out is the automatic seats...
She adjusted them for her driving, then I adjusted them for my driving, then she adjusted them again, then they adjusted to some weird setting when she unlocked the door!!
What we'd like to do is have it so that:
It defaults to her setting regardless, unless a button is pressed for something else. How do we set that?
The ABS is kicking in during hard acceleration on a GTI... is there a way to tone it down with VAGCOM or is my only option to disable it?
View 11 RepliesIs it just me but why cant I adjust the cars temp without the fan running? I like to keep the air selector on fresh air from outside and since its colder now the air comes thru the vents cold. If I try to make the temp higher with the steering wheel controls it wont adjust unless the fan is running. Once I turn the fan on them make the adjustment I can then turn the system OFF and it will stay at the warmer temp. Whats up with that?
View 2 Replies