Guys, my 2005 V8 is giving me the annoying sign (making a squeal noise while driving that actually goes away when I apply the brakes) that my pads are wearing out. "Just brakes" quote me $89 to change the pads. That sounds too good to be true.
View 5 RepliesIs it just me or is this an ABS thing? during a snow storm i was going about 25mph and had applied the breaks and started making a grinding noise... if it is the abs how are you suppose to work with the response time for a quicker stop.
View 2 RepliesI just replaced my front brake pads and rotors. Car had no squeaking sounds before this. When changing the right front pads and rotor, the set screw that holds the rotor in place snapped on me when I tried to remove it. I drilled out the remaining screw and inserted an easy out / screw extractor to try to remove the broken screw. Screw wouldn't turn/budge and eventually the easy out snapped in half while trying to turn it. Here is where I fear I made a little problem into an even bigger one; I tried to remove the broken easy out by banging the back end (smaller end) of it with a hammer and screwdriver, hoping it would pop out from the front of the hub. No success, and continued using a lot of force to try to remove it from the rear part of the hub. Eventually I noticed the hub area by the back of the easy out bent a little from me using force from the rear to remove the easy out. I stopped there, bent the hub section back to original shape (didn't bend too much to begin with) and sawzawed off the protruding end of the easy out from behind.
After driving a few times I started noticing the squeaking sound coming from the front right wheel, the sound sounds like is in tune/harmony with the wheel rotation. As soon I step on the brakes, the sound stops. I had a similar sounding problem with a rear wheel a long time ago and it ended up being that the bearing needed adjustment. I know the front bearings are pressed in so they can't be adjusted. I am thinking the force used to try to remove the broken easy out damaged something with the hub or bearing or maybe the axle nut.
With only 1,800 miles on my 2016 Sonata Limited, the brakes make a high-pitched noise when applied and backing up. I noticed yesterday the noise has also started as I brake for red lights.
View 5 RepliesI recently purchased a used 2009 Kia Rio. I really am enjoying the car. While there is nothing fancy to it, it gets me to and from work and that's basically what I need. However, when I apply the brakes, there is a high-pitched squeal that is made until the car is almost at a stop. It does this I would say 90% of the time. The brakes work just fine and are in fact very sensitive. I've tried researching this online and it seems a lot of people have this problem because of the type of brake pad used. The dealership I purchased it from is more than an hour away from my home, so I am reluctant to drive down there if there really is nothing that will be done.
View 3 RepliesMy '07 GS350 recently began exhibiting brake squeal when brakes were gently applied. I subsequently took it to my dealer for a multipoint inspection, with the results being the car was fine, including the brakes. I was told the squeak was the result of brake dust, and nothing to worry about.
Since the inspection, I noticed the right front wheel is accumulating brake dust, but none of the others are; and the noise is irritating. I called my SA yesterday and explained the situation. He reviewed the car's service history, and noted the front pads were replaced with noiseless/dustless pads 40k miles ago. I agreed. He again said it was nothing to worry about. My thoughts are I'll have to put new pads on the front, even though the current ones are fine.
I am new and just picked up a used 2008 Passat yesterday. It has 42k miles and what I had thought in perfect condition. I wanted to see what was going on before I took it into the dealership to get repaired. When driving I hear a constant whine / (like water is on in a house) type noise. Its noticeable all the time except when the brake is fully applied. It comes back once the brake is depressed and in park. I thought at first maybe it was just a brake pad rubbing but the constant noise in Park confirms its something else.
View 2 RepliesMy car sounds like it's dragging something but when I look under it there's nothing there. The sound it makes is comparable to the sound a snow plow makes as its plowing the road. The sound is constant but gets worse when I brake. What could be the cause?
View 10 RepliesA couple of weeks ago my 2005 Buick century start making a noise when i hit the brakes and all the lights on the dash lit up like a christmas tree. The noise it makes when i hit the brakes is like humming sound and the pedal will get kinda spungy and push in and out, if i keep driving it stops and all the lights come on (abs, trac off, service engine, and sometimes the brake light as if the parking brake is on) after all these lights come on the noises stop and the brake pedal works fine. I was told that the anti lock brake pump was going bad but I didn't realize there was a pump.
View 3 RepliesAsking on behalf of the woman who picks up my kids from school and drops them off at after school care. She has 2005 explorer and says the brakes are making noise while she is rolling. noise stops when brake is applied. she thinks it is coming from the front. I said I would check it out. I've owned a few trucks but never messed with an explorer.
View 1 RepliesOver the last 2 wks or so I have been hearing grinding noises out of the right rear brake. 1 day it sounds like it was metal on metal. Think is just all the road salt catching between the brake pads?
View 10 RepliesBefore I go digging in my "information not available at time of printing" owner's manual, is there a reason why the temperature display on the MFI would flash and make a "ding-ding" noise at me while I'm driving?
View 3 RepliesWhen I step on the brakes during traffic & released it to roll the wheels, I hear the brakes squeaking a few rounds & then it will disappear. It sounds like the brake is still engage with the rotor & doesn't fully release until a few roll. This happens more during warmer days.
View 6 RepliesMy Treg has about 3K miles on it right now, and since I picked it up, the brakes have squealed (some times VERY loud, some times just a slight squeak at the end of the braking process). It is currently in the shop for the second time to get a fix for this or an adjustment, and I just got a call from my service advisor telling me there is nothing they can do to quiet the brakes--it is the nature of brakes to squeak and squeal.
I realize that brake dust (and man, there is a lot of that on this vehicle) can make the brakes squeal a bit, but does it even make sense that they would tell me that brakes are supposed to squeal?
I am also having a sticking door handle and a defective ac/heat control issue looked at while the Treg is in (I can illuminate both the "auto" and "econ" buttons at the same time, instead of one switching the other off). Should a vehicle at this price point have noisy brakes?
I have a 05 T with 85,000miles. Recently, it has developed a piercing squeal which varies according to rpm level. VW dealer thinks it is a bearing in driveshaft.
View 3 RepliesThe driver side brake light does not come on when you apply the breaks but the light comes on when you turn them on.
View 2 RepliesMy right rear brake is making a grinding noise when the brakes are applied. I took the drum off a couple weeks ago and the shoes are just a bit worn. Just getting into the numbers printed on the side of the shoe material.
I could not see any thing that would be making the metal on metal sound. Are there any wear indicators on the OEM shoes?
Our gen 1 has developed a (currently minor) noise issue when braking. I'd like to sort it out before it becomes serious.
The brakes are still strong, and the regenerative system appears to be working. When the brakes are applied (even gently) there is a pulsing raspy sound, seems like it is coming from the front, driver's side. It is more rapid at higher speeds, and louder during rapid deceleration. I guess I'd call it 'grinding', although this is much less unpleasant than the classic 'grinding brakes' I've heard on other cars.
In any other car I would figure a warped rotor or worn out brake pad. But I had imagined that the regenerative system handled light braking, and conventional brakes took over beyond a certain threshold. Now I'm hoping they work in tandem, even on gentle braking and this is just a boring, simple pad issue.
Does this mean I need to see a mechanic. My car is a 97 buick century, 94kmiles. Rear brakes were replaced at 83k and front brakes were replaced at 80k. A few months ago, the noise began and has persisted once a day when brakes are applied first time of the day.
View 5 RepliesSo I drove 400 miles today and when I was just about home I heard a grind when I applied the brakes on the freeway. Well I did a walk around the car to check all the pads and noticed my rear pads are almost gone. I'm not used to having the rear brakes implemented in so much of my daily driving, with the TCS and all.
To make it easy I'd like to keep all four corners on the same brake setup, I'm just not sure what is ideal on this car. I know OEM is gonna be said, but I upgraded my front pads to Hawk HPS'.
Right this clicking noise is really annoying me now, every time AFTER i brake i hear this click, the faster i stop the louder the click is, also when I am in neutral and suddenly rev its clicks sometimes but rarely, I am thinking it could be a loose exhaust somewhere? Its definitely coming from under my foot area. When I brake cornering it clicks too. Checked my control arms and everything, that's not rattling at all? Need to get rid of this click sound!!
View 3 Replies