I own a 2009 VW tiguan 2TSI 4WD. Lately i am experiencing undercarriage low tone grinding noise as i made turns at slow speed. i am not sure if the noise is coming from the rear or front. Why and what should i do about it.
View 3 RepliesMazda5; 2010; 105,000 miles.
Recently, our Mazda has started making a subdued grinding sound. It happens only when accelerating from idling to 10 miles per hour. It does not occur over 10 mph, in neutral, or park. It doesn't happen when starting the car or in reverse either. according to my wife, it does happens when turning right at slow speeds, but not left.
We have just driven it to our mechanic but it may take a couple days before they are able to look at it.
i have a Subaru legacy rs 1996 twin turbo, about 6 months ago now i replaced both front outer CV joints and boots due to a grinding when turning at slow speed e.g a car park. the grinding had gone and its was all fine until now the same grinding as come back. its it normal for the CV joint to wear out that fast or could there be a different problem?
View 5 RepliesSo yet I found out about another common issue but not that publicized. This is the grinding sound when turning at full lock (left or right) in slow speed. I've read several people in the forum who has encountered this. I read different remedies but the most common one is to have the CV boots lubricated.
I have a 2014 Wolfsburg with almost 5k miles. I am really now worrying about my water pump crapping out on me but I heard this grinding sound yesterday.
I have a 2004 Camry XLE V6 with about 70k with a CEL P0171 that came on yesterday. Looks like that code is for a lean condition. Could it be a bad O2 sensor or is that a different code and what should I look for to fix this code?
Also, I'm not sure if this is related but for the past few months my engine has sounded different. When I first start it up and at low RPM like 2,000 and under the engine sounds like a go kart, not necessarily louder it's just a different lower tone that it never used to have. It has sounded like this for 6 months but the light just came on yesterday.
I have about 48k miles on my 2010. Colder weather seems to bring out lots of noises. I can hear a suspension crick noise when I hit a bump and slow speed up the driveway apron. Got me thinking about shocks and struts. How long do they last?
View 7 RepliesA sort of honking/grinding noise, like really loud squealing brakes - but a lower sound, when at low speed, with the wheel turned right for maximum turning. Generally located in the front end.
It occurs consistently when I am returning home, slowing to a stop to pull around a curve in the road, right before I back into my driveway. It occurs with the clutch in or out, and with the brakes on or not. I tried doing slow sharp turns in a parking lot and I can't replicate it there.
It's happened for almost as long as I've had the car, and there's only about 1300km on it now. I've just been trying to track it down to replicate for the dealer. Taking it to the dealer is obviously my next step. I think I'm going to have to take a tech for a ride to my house to replicate it!
Car is completely stock so far.
Noticed the front suspension makes some "flexing" noises when turning the wheel during slow speed maneuvers? (e.g. during parallel parking). The best way I can describe it is it sounds like the suspension is being compressed as I turn the wheel as the car has almost come to a complete stop. (yes I know we should avoid turning the wheel when stationary). I realize it's probably normal. I'll just add it to the list of other noises my car likes to make. My car is bone stock btw.
View 2 RepliesI recently bought an'08 Base model. It is making a creaking noise in the front end on the left side either behind the wheel or under the motor. It only does it when taking off from a stop and/or turning mainly to the right during slow speed, seems to be when the body weight is shifting. To me it sounds as though something needs greased or maybe a strut.
View 2 Replies2011 SEL 4Motion w/ 2500 miles.
The tranny thumps sometimes at low speed to the point where I sometimes think I have been rear ended. It's the worst in stop and go traffic, shortly after coming to stop there is a thump.
Another way I can get it to do it is at a stop, let foot off brake most of the way, not all the way, but still enough where the car doesnt move. Then push the pedal back to the floor, there is a large thump...WHY! Driving me crazy. Something with the torque converter?
Also, is it not possible to let your foot off the brake and not have the car jerk forward without even stepping on the accelerator?
2004 Mazda M3 . My auto is making grinding sounds at first-slow speed until it accelerates. It has 70,000+ miles.What could this be? What should-could be done for this concern.
View 3 RepliesI've gotten it a couple of times lately while turning at slow speed. The first guess is always the CV joint/boot - but wouldn't that be multiple pops?
View 12 RepliesSo, I just noticed this happening about a month ago and it's been occurring more frequently. Whenever I'm turning (left or right) and moving at a very slow speed (1 - 5mph), I feel a binding and sometimes I hear a slipping sound (that's the best that I can describe it). When I hear this sound, it feels like the Touareg's gears or center differential is slipping. What it is? If so, was the dealer able to resolve it quickly?
View 5 RepliesGetting a creak sounds like near struts at slow speeds and turning , it stopped when it got cold, but on the first warm day today its back . I did replace the struts, bearings and seats, but have to admit I used the cheapos . I just cant find where its creaking from...
View 2 Replies2007 G6 Problem occurs at slow speed with sharp turning, such as coming out or into the driveway. As the steering rack moves slowly it tends to stick and release 3 or 4 times when turning sharply at very slow speed. It makes a sound so loud even the passenger cam hear it and the driver can feel it in the steering wheel. Does occur while driving normally. The dealer says its a GM problem with no real correction. They greased the rack and said the problem would return soon, but it is not a safety problem. So far they have been right on both counts. Are there any real cures?
View 5 RepliesGot the stabilizer bar recall done in February and have been on a couple of long trips since then. No real issues until about a week ago I noticed at low speed, when turning left, and usually if there was a small bump or incline........like turning into my driveway, there would be a popping/grinding sound. It could happen at speed, but never heard anything. I go last night to install some ECS cross drilled and slotted rotors and flush spacer kit and noticed this on the left front....
Well honestly I noticed first that I needed to wash my car, just got back from the beach and it has been raining here, but is this installed correctly. The bar is bent near the top, easier to see in person and I am fairly positive this is not correct. Called the dealership and they are going to check it out Monda. The picture below is of a left front on a MK7 and it appears to be the correct.
I purchased my .:R last summer with just over 100k miles on it. Two prior owners, car was fully stock and in great condition except for one thing:
Humming/vibration ("brrrrr" sound) coming from the back of the car when turning at a slow speed with the wheel fully cranked, e.g. moving out of a parking spot. It only occurs when moving, and with the wheel fully or almost fully turned in one direction.
The guy I purchased it from brought it to a local VW dealership when he noticed this and they (obviously) did not find anything wrong with the car, and blamed it on the tire wear.
So I changed all four tires. Still made the noise.
Haldex oil had been changed by the original owner but not by the second owner (who owned the car for two years prior to my purchase). So I had the Haldex oil changed and my mechanic said it was dirty AND at a low level, and might be the source of this problem. The noise did diminish for a bit, but it is still present.
So, I'm afraid my transmission or differential are fried from running on too little oil. It does not affect anything but it is definitely worrying me.
Immediately after putting new tires on my '02 Taurus SES, steering is really hard at the pullout, or turning at slow speed just after startup. After several seconds, steering is back to normal. I did have the steering pump flushed out with new fluid several months ago, and fluid is up to level now.
View 6 Replies6L w/automatic trans,no tunes,no mods. Fan doesn't speed up when ac is turned on. I checked connector at fan shroud and #25 10a fuse and wanted to see if there's anything else I can do or check before taking it to dealer. I haven't towed heavy since I noticed ac not cooling at idle but last time I did tow the fan ramped up on hills and stop and go. I'm in Texas so I must get this right asap. I heard of some with manual override so I would like to do that as well but also heard rumors the override can damage pcm. Any manual override?
View 8 RepliesSo I have every so often been hearing a grinding noise coming from what I believe is my back brakes (only does it when I brake). It isn't every time I brake but it does seem to happen almost every time I back up out of my spot initially and touch the brakes. It happens almost everytime I brake when driving at a reasonable speed. Tiggy has like 53,000 on it.
I have looked online and I just don't have the tools or access to a garage to do them myself so I think I am going to have to bring it in. Any rough estimate of what it is going to cost me? Also, I just bought this used on 7/5/14, I was under the impression in California that they can't sell a car with having brakes that are this worn.
Is it just me or is this an ABS thing? during a snow storm i was going about 25mph and had applied the breaks and started making a grinding noise... if it is the abs how are you suppose to work with the response time for a quicker stop.
View 2 Replies