I don't drive the Tig much as it is the wife's car. I have noticed on the occasions that I have driven it some unusual sounds when in R. Notice the sound when tapping the gas.
Video:
I believe the Tiguan uses the same 09G trans that I had in my prior vehicles, MKV 2.5 and B6 2.0T. I don't recall this noise before.
I was told that fixing the reverse gear can be done without dropping the transmission. Is there anywhere I can see a video of this? My shifter locked up out of nowhere and when I got it back loose it started clicking in reverse only when I back up.
View 1 RepliesWe brought our 09 SEL 4motion in for service (10K) and i had them look into a clunk when moving from Park to Reverse, it doesn't happen all the time and seems more common in the morning. It almost feels to me that the transmission is trying to engage too fast, like I'm hitting the gas and putting it into reverse. Anyway is this something that has popped up?
Also, they drove the car 40 miles for a 10k service which all I asked was about the terrible Sirius sound quality and that it "links" way too much. XM never seemed to do this in rentals I've had, nor sounded as bad (like a crappy internet MP3).
So I called and their answer is sort of acceptable that they feel they don't drive the cars enough to get the problem to occur, which in the times I've had problems with other car that required driving they didn't, but 40 miles to check the radio? And since it wasn't driven nicely the wife and I noticed the gas was very low.
I picked up a 2016 F250 Powerstroke in the first of March. I owned a 2011 before and loved it.
The 2016 has been great so far, but I've noticed a sound that wasn't present in my 2011.
When the transmission is warmed up, I get a "cla-click" sound from the transmission area when sifting from park to reverse. It doesn't do it all the time and I can only hear it, not "feel" it.
This AM I heard a similar click sound when I came to a complete stop. I only heard it while stopping, not while taking off. I could repeat it almost every time I stopped. I was in drive the whole time I heard the click sound while stopping.
What it may be? I know sounds are one of the hardest things to communicate/diagnose.
I had my window down as I was backing the car into the garage today and heard a metallic clicking noise from the rear as I tapped on the brakes. The noise only happens when I am in reverse. When I put it in drive and move forward there is no clicking noise. As an AZ resident its rare for us to have the windows down so to be honest I cant really say how long this has been going on for. My car was just in for service for oil , tire balance, and alignment this saturday
View 7 RepliesNew sound today: a click that simultaneously happened when the parking light (a yellow light with a P) came on the dash as I applied my brakes. i had already put the car in park but not yet applied the electronic parking brake.
I found it odd as i had my hand on the gear selector and felt a slight tap. So while the car was still on and in park with no electronic parking brake applied, i let go of the brakes and the yellow P light went off. so i applied the brakes again, the click sound and tap feel from the gear selector and the yellow P light came back on the dash.
Never had that happen before. Applied the electronic parking brake and that little light came on as normal on its button. that's when i normally see the yellow P light up on the dash. I always use the electronic parking brake so i am not sure what page 205 in the manual is referring to when stated:
If the electronic parking brake has not been used for a while, an automatic system check will occasionally run while the vehicle is parked. this system check makes audible noises.
My 2014 pip has an odd noise I first notice when pull out of the garage. When I am traveling in reverse and hit the brakes there is a loud click as if something in the suspension is shifting. Then when in drive I have the same click the first time I hit the brakes.
I also hear a metallic rattle on the highway over expansion joints. The dealer says that noise is nothing but coupled with the click under breaking I am sure some item is loose.
I have a 2006 Hyundai Azera Limited, 3.8 with 5 speed automatic; car has 139K miles. I am noticing a small 'click' noise when putting the transmission in Drive or Reverse, and sometimes when accelerating from a dead stop. Car otherwise drives beautifully - the 'click' doesn't seem to affect driving it. The CV's don't make a clatter if accelerating at full wheel lock, which is usually the tell-tale for bad CV's. Is this something simple? My thoughts are:
1.) Somehow it's a CV joint. Grayson Hyundai said they're 'shot' but I think I would notice more than a brief click? They said a whole bunch of other things were wrong on their 'inspection', said the brakes were 'shot' because the rotors had rust on them... I don't trust that opinion.
2.) A motor mount or transmission mount. Seems more likely since would be most noticeable with torque.
3.) Something in the suspension. The car has new tie rod ends, but there may be something else worn/loose that I'm not aware of.
4.) Maybe I am just being too picky. The car drives awesome!
Maybe I'm overreacting, I just don't want some sort of catastrophic failure to occur.. The car still feels very robust, solid, and overall quite healthy..
I have a 2012 F-150 STX 4x4 with the 5.0 liter. I have noticed that when I put my truck in to reverse and sometimes drive I get a click sound. I jacked up the truck thinking it was the drive shaft that was loose but it wasn't... But I believe it is coming from the rear end. I found a video of the sound on youtube.
Check it out : 2013 F150 Rear End Click - YouTube .....
2000 F150 Lariat, XC, 2WD, 5.4L, 4R70W
I don't know if this all started right after I got back from towing a 3500# lathe + 2000# trailer back from Texas a couple weeks ago or if there might have been some slight symptoms before. I do know that this really got bad a couple days ago and I haven't driven the truck since then.
So, here's what is happening. I noticed a few days before that when I would back out of a parking space, the truck didn't seem to go right into reverse. It was as if it was in neutral, but as I was reaching to jiggle the gearshift lever, it would engage and I could back out just fine. All forward gears, and shifting, have been fine all along, including lockup. I kind of wondered if the shift linkage had somehow moved and was on the edge of being in the right spot, so I was going to have a look at it one evening soon. Then a couple days ago, I went to back out of a parking spot at work and it wouldn't go anywhere.
Just acted like it was in neutral. Put it in drive and it engaged just fine, then back to reverse and nothing for a few moments before it finally engaged. Then, as I was backing up, it acted like you might expect a limited slip that was not slipping to behave. But, that was right before I put it in drive and went home. After I got home, I tried it out some more and found that in reverse, it just wouldn't go anywhere unless the truck rolled a little bit. I don't know if the rolling really had anything to do with it or not, but the driveway is on a slight incline, so it happened, and then the transmission would engage. But, when it did start to back up, even straight, at first it acted like it was under a load, then when it started to move, it bucked really badly. Put it back in drive and all seems fine.
There are no codes set. Trans fluid is full, and doesn't smell or look bad. I've searched for reverse shudder, and other stuff, and there are threads about the TC, about no reverse at all, and a bunch of other stuff, but nothing like this that I found.
I got a 99' Jetta gls 5 spd. I just replaced the transmission and now the car won't engage reverse from inside the cockpit. Reverse can be engage from inside the engine bay, but when the shift knob is depressed nothing happens. Linkag cables are in the correct spots.
View 6 RepliesI have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
This is on my 98 F-150 4x4 with the 5.4 and 4R100. What happens is when I put the truck in reverse and get on and off the brakes, every time I do so a relay clicks. It sounds like it's right up behind the instrument cluster.
I stuck my hand back there and can feel the click resonating in the metal brackets, but I can't figure out where it's coming from. It's never done this before and I'm worried something may fail at an inopportune time.
What this may be? It's a really loud click too and only does this in reverse. Park, drive, neutral etc. are all fine. The odd thing is when I hear the click everything still works as normal, parking lights, brake lights, reverse lights.
Started having an issue with my '92 E-350 box truck. I noticed a slight hesitation while driving which I thought was a miss from perhaps a plug wire jumping or something. It didn't do it all the time, just occasionally for a few seconds then would clear up. I looked for a bad wire at night but couldn't find anything so I said hell with it and changed plugs and wires, cap and all.
That didn't fix the problem. Progressively the problem has gotten worse. Then I started hearing a pinging, almost tapping noise as the truck was stumbling. Now I've noticed that the motor seems to be running fine as it does it which has led me to think it may be in the trans.
A little background on the trans. About 6 months ago the van started randomly conking itself out coming to a stop after a few minutes of driving. It seemed the trans was bogging the motor down as if it were locked together. If I put the truck in neutral coming to a stop it wouldn't do it. I went ahead and had my uncles shop flush the trans and he put some sort of synthetic fluid in it.
Since then the van has never done the cutting off thing again. All seemed well. Then this started. It does it from take off through all the gears even in OD. It almost feels as if someone is rapidly hitting the brakes. I thought maybe malfunctioning brakes however soon as I'm not pressing the accelerator it doesn't do it.
Today I had about 4000 lbs of wood in truck and it was a horrible trip. The truck would barely get up to speed. I unloaded the wood and on the way home it only seemed to do it going up hills so it seems any load on the truck makes it happen.
Does it seem I'm in the right area thinking transmission?? Being it happens in every gear would a torque converter seem to be a possibility. When I was having the cutting off problem I was told it sounded like the converter wasn't unlocking but the flush seemed to fix that issue.
I haven't pulled the pan to see if there's any surprises in it and I did the diagnostic check and there wasn't any problems found. Any other manual diagnostic checks?????
When I reverse on flat surface no bumps or anything like that... when I proceed to go forward I get a light click pop noise from my passenger front area I don't know what it might be I will be putting it on a lift to check if anything is loose ...suspension mods are usrs bushing and bc coilovers ...What I should look at would be great. When turning or going over bumps I get no noise what so ever its only when I proceed so go forward after reversing
View 2 RepliesFacing problem from last 6 months, brand new tiguan, car started put reverse gear then loosing power immediately, once you re-start the tiguan then everything will be alright!! Follow-ed it up with dealer but they can't simulate so no issue for them!!
View 1 RepliesIs this possible, maybe through VAG-COM? I see the option in the user manual for having it auto-down on reverse, but doesn't see to be in the options.
View 11 Repliesthis has been an outstanding van, quite reliable. it has about 115,000 miles on it. Recently, I've noticed that the transmission makes a 'tapping' noise when it shifts or downshifts. every gear has that same slight 'tap'. the tranny shifts fine, smooth, but this sound worries me a bit. any chance this could be a u-joint issue?
View 1 RepliesHaving trouble setting up their Passengers Side mirror when in reverse? At one point it was set to move down when in Reverse, but lately it hasn't done it anymore. I tried re programming it and no luck.. The instructions in the Manual aren't too clear.. I've tried going off that, but still doesn't work correctly..
View 3 RepliesThis has going on for a few months now off and on. Whenever drive my F hard I notice this metallic click when i go to shift hard into second. The metallic click seems to be coming from the front of the car. I also get it if I'm around 3600rpm in and stomp on the pedal in first or second. It also happens when I shift into reverse. What it could be??
It also happens when i floor it and let off and do not change gears mainly in first and second. Sometimes i get a double click also.
At first I thought something could have gotten trapped in the engine bay and it only accelerated to a high enough speed to cause an audible noise but seeing as it been 3 or 4 months I don't think its the problem. It does not seem to effect spend and it does not make the click all the time.
I have a problem with my Backup reverse camera, actually my tiguan not bring it with camera backup and I install and change the radio for rcd 510 bosch with backup camera port,
View 6 Replies