Lately, been hearing a lot of creaking noises coming from the sunroof in the closed position. I have open and closed it a few times just to make sure it was aligned improperly. Maybe it was a one-time thing from having it open on a nice day but it has been pretty consistent now. Seems to be fine otherwise, opens and closes, no wind noise when closed, etc.
View 11 Replies2013 Elantra GT prompted me to join. There is a creaking sound coming from the closed panoramic sunroof when I drive slowly over an uneven surface (e.g. driving over an uneven gravel driveway that has potholes). It is only an issue when the car is subject to a twisting action, and the roof is closed. For example, there is no creak when I drive 90 degrees over a speed bump; but, there is a creak if I drive over the speed bump at a diagonal. The creak disappears when the sunroof is open. I have taken the car back to the dealership several times and they don't know how to address the problem .
How this creak can be eliminated (without use of sledge hammer, which has crossed my mind at few times; also, driving with the sunroof open all the time is not an option for those of us living in the north).
My sunroof opened on the highway today with the switch in the closed position. Being a Seattleite, this could create a very wet condition in the cabin! I have owned the car for two years and have never experienced this before.
View 8 RepliesI did a search on this and have read a few issues.
- possible bad welds
- Creaking needing lubrication/readjusting
I have had my tiguan 1 month.. bought preowned and it creaks where appears to be the meeting point to the sunroof/back glass when closed.
VW doesn't seem to care as its a rattle, but there must be something i can do. Which areas do people lubricate? and if it is indeed metal/metal rattling at the meet point, how to adjust this? I tried letting the sunroof reset itself but to no improvement.
I'm looking to purchase a complete shifter assembly (cables, plastic box, shift lever, ect. Not the parts that bolt to the transmission itself) so I can reverse engineer them without having any down time with my car. I want to make an aluminum box and shifter assembly to eliminate all the plastic components in the stock shifter mechanism. I'm thinking along the lines of a VWMS billet shifter mounted down low in the box so it isn't seen when a shifter boot is used. This will hide the really cool assembly, but I'm after function here.
I'm currently at 23k miles and there are creaking noises coming from my shifter assembly. The shifter mechanism has also lost the crisp feeling it once had when it was new. The dealer has offered to replace it under warranty, but I want to do it once and do it right. The OEM plastic stuff will not cut it.
Vehicle: 2009 Toyota Corolla
Mileage: 55000 kms
I am recently experiencing some weird squeaking/creaking noises coming from my front suspension.. It manifests whenever I am going over humps faster than usual (or if the humps is not "perfectly sloped"). I seldom experience this during daytime but during nighttime, it is very evident.
this is the list of things that I replaced already:
2x ball joints
2x stabilizer links
2x shock absorbers
2x tie rod
2x rack ends
Did some wheel balancing and wheel alignment already...
I was able to replicate this by parking the car in a slope - parallel to the street with the wheels turned to right or left, and pushing the top fender downwards.
Driving along our streets, highway, and highway curved ramps is flawless.. Could this be bushings on stabilizer bars? or the control arms?
Today a creaking noise suddenly developed coming from the steering wheel when turning left at slow speeds. I only have 600 miles on the Tiguan, so was a little surprised to hear this so soon. I have found many others with similar problems on VWs through Google... the problem seems to range from coil springs to tie rod ends. I am hoping that this is just a freak occurrence, but am taking it in tomorrow.
It sounds like "creaking" as if you were shutting a door that needs WD40. That's the best way to explain it.
Since Ive got my 2010 Tiguan 2.0 TSI, I hear a creaking noise coming from the front right suspension when riding over uneven pavement. The dealer said it is a common known problem from many Tiguans caused by the engine mount and that VW recommends the change of that part.
The new engine mount is slightly different from the one that is installed in my car. I am still waiting for the part to arrive and to be changed. Meanwhile, I spoke with another 2010 Tiguan owner, here in Brazil, whose car has already received the new part.
He said that the creaking noise has gone but now he feels more vibration coming from the engine and a kind of "diesel-engine-sound" when accelerating... Location of the engine mount: [URL] ....
The "old" engine mount bears the code:
5N0 199 262 G
5AY CN
M086
09/03/27
[URL] ....
The "new" engine mount bears the code:
5N0 199 262 E
5AY CN
M082
09/03/10
[URL] ....
I assume that the first number is the part number, the last is the manufacturing date and the others are either car model or manufacturer code or anything else. Note that the part number is the same, except by the letter suffix: "G" in the "old" one and "E" in the "new" part. Well, the suffix designation does not make sense for an evolutionary design...
My questions are:
1) Is it a new design or is it a roll back to an older part that does not cause that problem although it was probably modified due to another issue?
2) Is this part number specific for 2.0 TSI engine or is it the same for other engines (petrol/diesel)?
3) Which engine mount have you got on your cars?
I've owned my 2004 GX since last November and it has a had an issue with the sunroof in the last couple months.
The problem is my sunroof rattles when it is closed and I have already taken into my local dealership. The first attempt was to lube up the gasket, which worked temporarily. The most recent attempt was to remove the sunroof and realign it as they said it was higher toward the rear of the car.
It seemed to have worked, but now the rattle started up again slight and it will probably progress to get louder. If I push up the sunroof, there is a slight play toward the front of the car. The rattle when driving seems to be coming from the between the front and rear seats so what is actually causing the noise. There is a slight rattle whenever i close the driver or passenger side door.
The service manager said that the GX's have this common problem and that there will also be a slight rattling from the chassis flex. At its worst, I could clearly hear the rattle driving in a straight line, while slightly steering left and right. I know the GX is a truck and not a unibody chassis design, but I would think Lexus could make quite sunroof for this luxury vehicle.
So the other day I went to close my windows and sunroof, I turned the knob to close on the sunroof and it went complete closed then opened it self all the way... Tried many times.. Could it need the switch going bad?
View 4 RepliesOn my 1991 945, the electric sunroof won't move at all (stuck closed). The motor visibly twitches clockwise and counter-clockwise in response to the control switch but then stops (or is stopped by the jammed sunroof). All the instructions I've read for working on the sunroof begin by saying "open the sunroof to the vent position" but how do I do that? Presumably there's some manual way, but I don't know what it is.
View 1 RepliesHave a sunroof that rattles when closed while going over bumps? I use my fingers to lift up on it and its barely budging, also floors are soaked....
View 3 RepliesI am considering purchasing a used 2005 Honda Pilot EX-L that has a sunroof. When I test drove it the sunroof sounded as though it was partially open even though it was closed. Opening and closing the sunroof did not solve the issue. Nor did cleaning out the sunroof tracks. Before committing to purchase this vehicle I would like to know if there is a way to fix the noise issue from the sunroof?
View 8 RepliesHappened 2 days ago, just as it started to rain. The sunroof opened about 15 cm, then just as I was starting to try to close it, it then closed itself by reversing smoothly.
Since then the sun roof has operated normally. I have waited for this problem to repeat, but it hasn't. For the first time, I tried to do a search, but failed using the key words "Sun Roof" and "moon roof". Since I know there has been several threads regarding the repair of the opening dial using a Bic pen casing, I know I am performing the search incorrectly. Issue only has happened once, and my hands were nowhere near the opening dial.
So randomly my sunroof has begun to rattle terribly when driving at 70+. It only rattles when closed, if I have it in the "up" position there is no rattle but obv then u get road noise.
I looked as well as I could down into the tracks and felt around and couldn't see or feel any loose screws or anything so I'm stumped.
I noticed that my sunroof creaks slightly when going over rough pavement when closed. I can duplicate the noise by pushing up on the closed sunroof with my fist. It's not loud at all but with the radio off and at lower speeds I can hear it.
View 9 RepliesI know this is a minor issue as problems go, but i put coins in my ash trays and just as i placed some coins in the driver ashtray i think one or two of them fell behind the tray and when I placed the tray closed, it closed and will not open. The more i pushed it the more it went in. How do I open this without damaging the wood.
View 1 RepliesI noticed today that my hood is not actually latched in the fully closed position - Hood sits like it's closed, but I can simply lift it up to the popped position without pulling the hood release. Secondary latch is still fine so it stays closed, but I'm in a bind:
So first question -If I cannot fix it, is it safe to drive as is 3.5 hours back home?
Second question - is there a way to get it to latch even temporarily, keeping in mind that the only tools I have are standard screwdrivers and a pair of pliers?
Latch appears to be functioning fine and I can lock a screwdriver in it no problem. I read some threads implying the latch might need to be raised, but as far as I can tell it's already positioned all the way up.
Pictures .....
The drivers window automatically drops when reaching the closed position. It will stay up if I hold the button.
View 2 RepliesPassenger window just stopped working in closed position. Neither driver's or passenger's switch would operate it. Was told it was probably the motor. Replaced regulator and motor. Window went up from half way down position using driver's side switch, then back to not functioning at all. Window lock button off. Also, now the auto up/down for driver's window not working, needs to be depressed or lifted for open/close. Guess old motor and regulator were ok.
2005 HONDA ELEMENT 80,000 MI...
My tonneu cover locks that came stock with the vehicle when I bought it back in 2005 are rusted through and inoperable. I tried to buy parts from subaru parts dealer but apparently they no longer carry the locks anymore as this is a discontinued vehicle. Where I can get one (locks) or if another type of lock will work? Also the handle on my bed door gets stuck in the open position when I open it up and it wont release from the open position unless I force the latch back into the closed position and it will then latch back up. I tried some lubricant but still wont release to the closed position when I pull the handle.
View 1 Replies