Thunderbird :: 1996 - No Brake Pedal - 4 Brakes Bled?
Mar 3, 2016
My 96 thunderbird had a rear caliper shot. I changed the caliper, the rotor, and the brake pads then bled all the brakes. The three I didn't touch bled perfectly when someone in the car pressed the brake, I let fluid flow, then tightened the nut. The wheel with all the new parts I get zero fluid out of. I removed the brake line completely and pumped the brakes and still no fluid. It has no pedal and three of the four brakes have been bled. My only guess is there is air in the line but why wouldn't any fluid come out if I continually pump the brake pedal with only that one line open?
View 8 Replies
Advertisement
I changed front rotors and bled brakes. They were hard for a few days and went soft. No leak in fluid (MC reservoir is still full). No leak in fluid near any wheel. Could I need to bench bleed the master cylinder?
View 12 Replies
I had to replace all brakes because the bleeders were rusted in, wouldn't come out. So I bled and re-bled, but the brake pedal is still squashy and goes down too far if I have to stop from any speed. I even used my vacuum pump for evacuating air conditioning systems, pulled quarts of fluid through all the brakes-definitely no 2004 vintage fluid in there any more! Yes, I made sure to never pull the master cylinder reservoir empty, which would let in air. I always start from right aft and end up at left front, in order of bleed first. No leaks, the fluid level is always where I left it on previous session. I must be missing something...How can there still be air?
View 14 Replies
I have a 96 voyager, it has been a great car for the last 10 years I've had it. My brake pedal goes down to the floor, it gives brake but I think barely and my brake light comes on. I have Bled it twice and changed the master cylinder , neither worked, I'm perplexed, my mechanic thinks it is the abs.
View 3 Replies
1996 chevy s10 pickup with 96500 miles. Have been dealing with this problem for more than a year. Replaced master cylinder once, brake booster twice and the abs pump (cost more than the transmission). My new mechanic has bled the lines twice, replaced the master cylinder and brake booster and apbs pump and is now at a loss. The brake pedal will go down half way and stick with a loud vacuum leak 'whistle'. I can pry the pedal back up with my foot and then it will operate find for a few days...then whistle again. I love this truck, the engine is strong (new tranny 9 mos ago) and the body in great shape. I don't and can't afford to get rid of it yet.
View 9 Replies
Sometimes my 96 Subaru Legacy will not turnover unless the brake pedal is pressed. Other times starts without my foot on the pedal. It seems to need the brake pedal addition more often if it has sat a couple hours or more without being started.
View 5 Replies
96 Aerostar Cargo 6 cyln. Auto.
There is a noise coming from what sounds like the rear passenger side wheel. Also, when you put it in drive and release your foot from the brake the van stays still. You have to push the gas to get it moving, like the brake is holding it. If you are going very slow on a flat surface the van will eventually stop instead of idling forward.
I have removed the wheel, it does turn hard. Pulled the drum (was very hard to remove). Had to move adjuster to remove drum. Cleaned inside, inspected the brake shoes, put drum back on, etc. I am pretty sure that brake is causing resistance. How to resolve it?
View 7 Replies
I've got a problem with my '96 Tbird that's really stumping me. It started with a little shake when I gave the car gas. I don't know if it's related, but I ran over some debris on the highway at around 70mph. [No chance to avoid, unfortunately] That same day it felt like the car was missing, and throughout the week it got worse and worse. It would shake harder and faster with increased RPM's. By the end of the week, it was so bad I kept the car off the road.
I thought it was a bad misfire, so I changed the plugs, then the wires, then the EGR and EGR solenoid [from JY] and swapped a coilpack from my other car. It ended up being the harmonic balancer, it spun a 180, not a surprise on an 18 year old car. I've never had one go bad, so I didn't even think of that as a possibility with the way the car felt. [I've been working on cars for a long time.] It never threw a code once, so I had nothing to go by to begin with.
So over the weekend I swapped out the balancer, and buttoned everything up. Ran fine! No shake! But then I had gotten a new problem.
The idle started to get bad. Very bad. It would lope, lope then almost try to stall, especially when the fans kicked on or I put it into gear. Since this car is my daily driver, I had it at work while I started to undo the new stuff I put on it. I started with the just unpluging the battery for 3 hours. Didn't work. So I pulled the new plugs, reverted them back to the old ones. It didn't work. Leaving work that day I noticed if I pull the IAC connector, the idle smooths out some, but it doesn't stall. [Suspect, maybe?]
So I figured it was the EGR, or solenoid, so I changed them both out. Nothing worked, still was horrible. Frustrated I changed out the coil pack and wires. It's still horrible.
I don't drive the car now, it stalled out a few times in traffic on the way back before I swapped everything back out.
The icing on the cake is that it has not thrown a single code except for when I unplug the IAC. And the only code it throws is barking at me for doing so.
It really feels like a bad vacuum leak. I've run down every single line and there's nothing leaking or rotten. The IAC is in question, but the car was working perfectly fine for at least a year with no problems whatsoever. So how the IAC went bad right after changing everything and a new harmonic balancer is way beyond me.
I'm thinking too maybe I damaged the Crank Position Sensor when I installed the balancer, since it was a one piece unit with the pick-up gear. But, I was careful with it, used a puller installer, and there is appropriate distance between the sensor and gear. Also, I'm not sure, but I doubt the Crank Sensor going bad would effect idle. Any RPM above 1500 is smooth, and doesn't surge.
View 6 Replies
My dad is having problems with his truck, brake pedal goes all the way to the floor even after bleeding all the brakes and the master cylinder. The wheel cylinder didn't have clips in it and he fixed it and it hasnt changed. What do we do? Its a 1993 f150 4.9l.....
View 4 Replies
I did a complete rebuild of my brake system in April. Drums, shoes, wheel cylinders, springs, hoses, pads, rotors, calipers, master cylinder, proportioner valve and flushed all the lines and refilled with synthetic fluid. I have made five trips from Southern California to Idaho hauling home furnishings, one trip to Oregon and one trip to Northern California since overhauling the brakes with everything working great. Now something strange is happening. The brake pedal goes to the floor with very little resistance. It isn't spongy like there is air in the lines. It just goes to the floor if you push it all the way down.
The truck stops ok but it is really scary with the pedal going down like that. You can feel when the rear brakes come on because there is a little resistance in the pedal when they come on. You can actually lock the rear brakes up and skid the rear tires. If you push the pedal down further the front brakes start coming on and if you push all the way to the floor the truck will nosedive and you will get planted in the windshield.
I wonder if the aftermarket Bronco Graveyard proportioner valve is blowing all the pressure to the rear wheels because it won't do it if you take the vacuum off of the vacuum booster. You have full pedal when the booster is deactivated and all the wheels operate normally with the exception of having to plant both feet on the pedal to stop it.
View 14 Replies
I have a 2015 IS250 F Sport with brakes that squeak. First time dealer said can't replicate and suggested hard braking to burn off any residue on rotors. Second time, dealer replace rear brake calipers which resulted in mix match colors of the brake caliper and bracket. Not happy.
Well it's starting to squeak again. Not sure if moisture and or cold has anything to do with it. Washed the car yesterday and as I was moving it down the driveway (small incline) the brakes squeaked as soon as I released the brake pedal. I was able to replicate this several times yesterday.
This morning brakes squeaked as soon as I released the brake pedal. Not on an incline driveway today.
View 8 Replies
This problem just started the other day. I park in a very slightly inclined garage and now when I get into my car in the morning, the brake pedal is so stiff the brakes barely engage and the car will actually roll until the engine turns over. All other braking behavior is completely normal while driving and it only occurs if the car has been sitting overnight. Doesn't seem to happen if it just sits for a few hours.
View 19 Replies
I have a 2002 Honda Civic EX 1.7L. Recently the brake pedal would sometimes go to the floor when I'd apply the brakes. The car would still stop, but not as quickly as normally. If I apply the brake and it goes to the floor I would release the pedal and reapply the brake and it would stop at it's normal position and the brakes felt firm and the car would stop fine. I was told my problem was the master cylinder so I bought one on Sunday and replaced it. I bled the lines and it seemed like all the air was out. The brakes worked great and the pedal stopped in the same place and was firm.
Now today on my way to work the pedal went down a little farther than normal during one stop. On the way home it stopped in different places. The brakes would always grab and the pedal felt fairly firm wherever it stopped. I drove it this evening again and the pedal went to the floor like with the old master cylinder. One pump and they grabbed in the normal spot. What is going on? Did I not bleed the lines well enough? Is the new master cylinder just junk? I saw in the manual that air can get trapped in the ABS sensor, but an air bubble problem should just make the pedal squishy, not change where it grabs, right? I'm stumped and I really don't want to take my car in if I can fix it.
View 6 Replies
I have replaced the front rotors, calibers, pads and brake lines. I went through the process of bleeding the brakes by using the following sequence: right rear, left rear, right front and left front.
I did this about 4 times - process was to pump the break until the pedal was hard then my son kept his foot on the pedal while I release the bleeder value. During this process I kept the master cylinder full.
Took the car out and the pedal went right to the floor when applying the brakes. The car did stop but not as I had expected. So what have I done incorrectly here? Is there something else to check?
View 3 Replies
I recently purchased a mutt of truck, a 97' F150 heritage w/5.4 Triton motor, 1/2 ton 2WD short bed.
Having a brake issue, the pedal keeps fading. I noticed it first while sitting in traffic on a down hill grade. I am holding the pedal and notice it starts to creep down slowly, I pump it up and it firms up then starts collapsing again. So general logic says hydraulics are loosing pressure right?....No leaks anywhere, so it must MC tight?
I have replaced the master cylinder, brake booster, and both rear wheel cylinders. Long story short they all needed it, truck has 265K+ on the body with 95K on the motor. The only thing I did not do by standard is bleed the MC on the bench, I installed and long bled starting with the right rear working my from longest distance to shortest (wheel speaking). So when bleeding I did of course get air coming out because of the new parts but I still have the same fade issue.
I am confident there is no air in the lines, I have bleed a quart of brake fluid through just to be sure. I have read a lot about proportioning valves and ABS stuff.
I will try and get some vehicle specific photos and attach have hit a road block with this. I am leaning towards the ABS valve thingy mounted on the drivers fender that has four lines attached (2 in and 2 out). Other than that it comes down to hard lines which have no leaks.
View 5 Replies
My buddy just bought a 1992 f250 460 the brake suck the pedal goes to the floor don't know if master or the booster or the rod needs to be adjusted or what the brake look ok and it stops ???
View 7 Replies
I am working on a e-150 van, 2005. the brake pedal fades to almost the floor with little pressure on it. I just replaced the master cylinder, bled the entire system, and it STILL fades to the floor. driving, or in park. engine running. 4 wheel disc, 4 wheel abs...
View 5 Replies
86 f150 4x4
brake pedel goes straight to the floor but if u give it short pumps of the pedel it grabs but barley....master cylinder or the booster?
View 9 Replies
So I have a 2004 Jetta 1.8t. Recently I noticed an issue with the brakes. It is a rare occurrence that this issue happens. Maybe 1 out 6 times I slowly stop the brake pedal seems to put pressure back against me applying brake pressure and makes somewhat of a grinding noise and the brakes don't seem to grab as well. But a split second later the brakes return to normal and grab as expected. Could it possibly be air in the brake lines or something totally different?
- Front brakes are in excellent condition.
- Just replaced the driver side front abs sensor and put new rear brakes and rotors on.
View 1 Replies
After replacing my brake pads and shoes I am hearing a squealing noise coming from the area near my brake pedal. This noise sometimes becomes high pitched if I depress the brake too hard. I am also losing a little bit of brake fluid if I depress the pedal hard several times. The brakes themselves function fine and have no problem stopping. When I bled the brakes today some of the fluid was black. I figured it might be air in the system but after bleeding them it is still happening. I also replaced the bleeder screws.
1997 Pontiac Sunfire 2.4L uses DOT 3 brake fluid.
View 6 Replies
I have 2006 Pontiac Torrent AWD with front disc and rear drum brakes. My ABS & traction control lights come on together (sometime) when I hit brakes slowly to slow down my car around 20-30km/h with a grumbling/scraping feeling sent to my feet from brake pedal (feel like rumble strip on highway). ABS & T/C lights go away if I shut off engine and restart car. It also happens if I accelerate at that speed. This issue does not happen when I hit brake hard.
View 11 Replies
