Taurus :: 1999 - New Belt Run Out - Old One Making Noise
Aug 30, 2014
My brother and i had replaced the idler pulley and the tensioner pulley oh his 1999 taurus wagon with a 3.0l and after we changed them we put a new belt on it and after about 10 mins of running it started to runoff the alternator pulley put the old pulleys back on and it runs fine except a noisy squeal so we put the new ones back on again and same problem except after about 35 mins it ran off again is there something we are missing this is getting expensive replacing serpentine belts. Like i said with the old pulleys it runs fine just very noisy new ones runs quiet just blows out serp. belts
View 5 Replies
Advertisement
I havent had my 2000 taurus too long.... Last week a knocking noise started. It usually happens when I am turning but there have been a few times it does it when I am braking. It doesn't happen right away - just after I've been driving for at least 15 minutes or so....
I got this looked at last weekend at by a mechanic and they drove it and didnt hear a thing and supposedly things underneath looked okay. I can tell that things ARE NOT OKAY. Also, since this knocking started, my alignment seems to have gotten off a bit. I may be a blonde but I've had enough problems with past cars that I usually know what I'm talking about!!!!
View 11 Replies
A co-worker drives a 1999 Ford Taurus with the 3.0L DOHC engine. The transmission makes a strange whine only when it is decelerating. It is quiet and smooth as it accelerates and drives, but let off the gas, and the whining begins. The whine changes pitch and intensity as the car slows down, and eventually fades away once you stop. Stranger still, the whine goes away if you shift to neutral and continue to slow down. It also goes away the instant you begin to accelerate again without stopping.
Someone told him it sounds like a torque converter going bad, but that doesn't seem right to me. The whine starts as soon as you let off the gas, and has a steady decrease in pitch and intensity for speed to stop. It doesn't matter if you slow down easy or quickly. I was thinking a bad bearing in the transmission somewhere in the final drive.
View 4 Replies
My mom was driving to pick me up and she said that all of a sudden about half way here that the car started making a knocking sound and white smoke started coming from hood, the car was also trying to shut itself down while she was trying to pull over. It is a 2000 ford taurus with like 130k. I am so scared that it is the head gasket because my mom, myself and my daughter, and my 16 year old sister all share that car to get around. Is there anything else it could be besides that or is that probably what it is?
View 19 Replies
I own a 2008 santa fe SE, the belt tensioner start to making noise recently, just wonder if it's covered under the warranty so I don't have to pay out-of-pocket to get it fixed. This car have 68000 miles so far.
View 19 Replies
I have a 2009 Camry 5spd with 92K miles on it. Camry is completely stock and original with meticulous services to engine oil and drained the transmission fluid at 68K miles. I am hearing an engine hum every now and then (although I notice it more often now that I am searching for it) while I am idling. I don't believe it to be engine vibration, rather it is a hum, seems like a belt pulley bearing is going out, or even, and i hope its not, like my throw out bearing in the clutch is going bad.
Only reason I say that is because it makes the hum for a few seconds then goes away, then comes back for a bit. It makes the hum when i have the clutch engaged and when i have the clutch disengaged and a in neutral. I have opened the hood to try and search from where it is coming from but it is just too darn hard to figure out.
I am hoping it is nothing related to my transmission. I may pull the fill plug on it this weekend and try to stick my finger inside to see if I am low on fluids and it is making a hum (but I highly doubt it because when I filled it up after drain i filled it too the top). I haven't experienced any burning of oil and use 5W-20 (Castrol GTX since day 1). I may switch fluids on my next change and use maybe a different brand and viscosity (maybe use standard Quaker state at 5W-30).
Again it isn't an engine vibration, rather just a hum or almost like a stinking wobble and then goes away for a few seconds. I say wobble kind of like you would hear a drive shaft on a truck that wasn't balance properly and was spinning without being centred with counter weights.
View 1 Replies
Weird problem I've had for some time... The car makes a noise that sounds like a slipping belt and only does so at a speed of 15 mph or more. Its a manual and I know it can't be a belt because I've done a little testing while driving. I'm going down a hill, put it in neutral, turn the engine off completely and coast down the hill and the noise is still there. So nothing in the engine is turning at this point, I'm just rolling. So what is moving at this point that could make such a noise?
It also makes the noise when the engine is running and what's weird is I can almost make it go away (the cycles of the noise become less and less frequent if that makes sense) while in gear if I apply the gas just a touch to a point where I am neither accelerating or decelerating. What this noise might be?
View 14 Replies
I was wondering because serpentine belt is a big thing for 05 corolla since everything runs on it. I also had a 94 camry which had a alternator connected to a belt. and if i wanted to tighten up that belt i would just loosen the alternator and pull it. Is there a way to tighten up serpentine belt in my 05 corolla in the same way?.
View 1 Replies
My tensioner pulley is making noise.I replaced the rear idler pulley (can't get to the front one), but still have the noise. Mention a DIY for replacing the tensioner pulley bearing. A part number for the bearing?
View 2 Replies
The steering on our 02 Accent has been becoming more and more difficult. The belt on the AC compressor snapped off recently. Could this missing belt be causing a problem with the power steering belt? The power steering belt is now making a squeaking noise.
View 3 Replies
2003 vr6
Belt squeal but when I have clutch pushed in no noticeable noise.Abs kicks in at low speed stops. I sprayed the belts with dressing noise went away momentarily actually sounded like it could have killed it almost. Right now I have the and fuse pulled to just get me by.
View 2 Replies
My belt was making a screaming squeaky noise to wake up the dead. I used dish soap on it and it got quiet as long as I remember to bring the dish soap. My mechanic looked at my AC and told me I need a new compressor (he is a friend I trust) Now the AC comp turns but the belt seems to go on and off. And, the weird thing is-the AC feels great! Am I to expect any moment for it to just stop working? So, what to expect from my dead or dying compressor?
View 18 Replies
I have a 2006 Honda Odyssey. I got the timing belt replaced two weeks ago.Last week the engine started making a quiet clicking noise upon acceleration. The clicking noise happens intermittently not continuously. Then last night the yellow engine light came on. Questions: What does the yellow engine light mean? Is the engine light related to the timing belt work that was done? Would the clicking noise be connected to the timing belt work?
View 3 Replies
I have a 2002 f250 7.3 and the belt is rubbing front edge of the belt and making a whipping sound at 65 mph. Have replaced tensioner, idler, water pump and a/c bearing & pulley.
View 2 Replies
I noticed my serpentine belt started squeaking about 3 days ago. And yesterday as I was driving to work I heard a clicking sound coming from the left side of the hood, then my car started to gradually shut down and white smoke was coming from the engine. When I got to the stoplight it completely turned off, but I was able to turn it back on again to turn into the parking lot before it shut off again. When I checked it there were no visible leaks, my reservoir for my coolant was still full, and my meter never went up indicating that my car was over heating. I'm not sure what's wrong with it, but after it sits for awhile it is able to turn back on again for a while.
View 3 Replies
My serp belt squeaks due to contamination due to timing cover leak. I removed belt and cleaned it with mild degreaser solution and it was quiet for 1 day. If I had 100% water in cooling system, would any more leakage cause a belt squeak? I am putting off fixing timing cover gasket since it is a 5hr job. Coolant is @ 90% water concentration now.
Taurus 3.0 Vulcan motor.
View 9 Replies
I have a 1999 Ford Taurus. I have noticed a faint knocking sound for about 6 months. I took it in and the mechanic said ' what noise? '. Then it got louder so I took ot back in and he ssid 'bad water pump' I had another mechanic friend check, and he said the water pump was fine. Plus, I've never had any overheating . a 3rd mechanic said "could be loose torque converter bolts." It sounds like metal clunking on metal under the hood.. rpms, speed, & temperature make no difference. Occasionally get a smell of coolant inside the cabin . I'll attach audio of the noise.
View 15 Replies
So I was trying to track down this squeak noise and I removed the drivers side seat belt but now the belt will not retract? It's stuck like this, is there a manual release? Buying another one is not a option right now. And I have to drive the car tomorrow morning.
View 1 Replies
2006 6.0l ... I've read all over for tips on routing this belt and everyone plays it off as being some simple '20-minute' task. I'm on my 4th hour on this now.
I can't figure out how to route the belt around the tensioner pulley, circled in the picture (from another thread). Everyone glosses over how to do this and I can't figure it out.
It seems like the only way to get it on is to bend the belt and slide it between the pulley and the block, but that I just can't reach the blasted thing.
View 4 Replies
The timing belt went out at idle while making a turn. I changed the timing belt, but when cranked you have to pump the gas to keep it running and it is really rough running with a smell of gas when you turn it off. On the last run it backfired slightly. There is no knocking or pinging. And have triple checked the timing. Could improper torque on the crankshaft bolt cause this or failed ignition coils?
View 21 Replies
Yesterday i was cleaning my car and when I took it out from the garage i noticed a spot on the garage floor. Put my finger on it and thought it was oil but when i looked under the car it was red. It was a few drips on the oil pan and a few on the splash shield. I'm sure its coolant because i was missing some too. This morning on my way to school by serpentine belt started the squeal every time I let go of the clutch. Where this leak is from? My guess is that its leaking onto the belt making it squeal and slip. Its a 03 vr6 24v ...
View 1 Replies
