Suburban :: 2003 - Truck Not Starting / Security Light Was Not Lit
Oct 29, 2012
I removed the cluster in my friends 2003 Suburban last week to send it in for repairs as the gear selector and backlights as they were not working. I used this company several times before and they do excellent work. When the cluster arrived back a few days later I installed it and the truck would not start. I made sure the battery wasn't ran down and that everything was connected and still nothing. I called the GM dealer and the service tech told me that the truck should run without the cluster plugged in. Tried it and still no luck.
I proceeded to do the passkey security relearn procedure even though the security light was not lit and nothing. I got on here yesterday and read a post of about possibly a bad connection in the steering column so I lifted the column up and down several times while trying to start the truck and got nothing. All of the lights come on and I hear the fuel pump prime but it does not attempt to start. I drove the truck in the garage the day I removed the cluster and it ran great.
View 4 Replies
Advertisement
I have a 99 Suburban k1500 that will start and stall out after a few seconds. The security light is on constantly and will not reset after trying all the procedures listed. I have even tried the resistor bypass trick using 3200 ohms as required in procedure. Light would go on and off intermittently for several months on regular pattern and would restart and run fine after setting for a few hours or overnight. Now it has been weeks after a tow home and nothing seems to reset it or work in bypassing it.
View 9 Replies
Every once-in-a-while I've noticed a "security" light is illuminated on my dash-board. When this happens, I can't start my 92' Buick LeSabre for about 5-minutes or so. Aggravating, to say the least. Is there something I can do? Including "disabling" it?
View 2 Replies
I have a 2000 Chevy silverado. I recently was having problems with the transmittion not switching correctly. Long story short the shop told me to fix the problem I had to put in
A new transmition as well as a new computer which I did, from another Chevy. It worked for a few days then The truck was not starting and had security light on. Had alarm specialist take look and he said the computer had to be reprogrammed. It was reprogrammed at merles. And was still not working. Its unable to start, starts at random once in a long while. ignition switch was changed and still gave same problem. Took to another shop they had a specialist take a look and he said the computer had to be reprogrammed again.
Also would it be possible to bypass the anti theft system by adding a remote start, or cutting some wires. I just really need to get this truck running.
View 14 Replies
We have a 2007 Ranger. When the temps hit 32 degrees F or below, the truck won't start. The security system light comes on. We have to run through the security system reset process, sometimes a few times, before it will start. Afraid all this key turning is going to burn out the ignition. Don't have a lot of confidence in my Ford dealer as they replaced the brakes and put the shims in wrong. Local mechanic says it's probably electrical. Is there anyway to bypass the security system or can it be removed?
View 1 Replies
My buick has a weird problem, basically it wont start the security light comes on, nothing and i mean absolutely nothing works inside of the car and the power window circuit breaker under the back seat is burning hot, obviously its an electrical problem but I am thinking its the body control module but I want to be sure .... what it could be?
View 5 Replies
For the past few months security light of my 2003 Alero keeps on activating preventing the engine to start or it doesn't even crank.
I always do the reset technique..."Turn ON the engine key for about 20 minutes and wait till the flashing security light become solid before starting the engine." Today when I started the car the security light comes ON and stays on for my whole 50 Kilometers travel. When I reached my destination,I tried to turn ON and OFF the engine waiting for my luck to have the solid security light to come OFF,but no luck.
Will this problem have any effect on the performance of the car? Will the car stall while I'm on the road?
View 11 Replies
1996 f150 sometimes it starts sometimes it don't. It is cranking over the starter is in gauging as well as the fuel pump I can hear it.... It's getting spark and I replaced the starter solenoid.
View 5 Replies
I drive a 2001 ford f150 lariat 5.4L. My truck will crank but not start, i am getting complete spark, and have ran a full fuel pressure procedure, and am getting complete fuel pressure, there is no water in my gas, everything checks out how it should. I ran a test on my cluster and it showed a code that said i am not getting connection to computer to start. I removed the cluster and repaired all loose wires properly, and it still wont start! I have had many people look at it and they said it could still be a bad cluster.
View 13 Replies
When starting from a full stop our truck intermittently will act like there are air bubbles in the fuel line or something and will nearly stall out several times before it gets going. We don't have a problem while driving. The "hiccups" eventually got better after we began buying a different kind of fuel, but there is still a problem. We have had the truck looked at several times but no one can find anything wrong with it because the truck seems to always be on its best behavior when we take it somewhere. Except for this, the Dodge has been a great truck and pulled our 32' "house" all over the USA and Canada since we bought it brand new in 2003. We are very good about doing all the regular maintenance so the obvious answers can probably be ruled out. It has a Cummins diesel engine and we regularly add an additive to the fuel.
View 3 Replies
I have a 2002 F150. I have an intermittent issue with truck not starting. It turns over fine but will not start. Also, when having this issue, there is also no activity with the cluster when turning the key on (other than lights lighting up); the gauges will not move as they would normally when turning key on. I have checked every fuse inside / out. I have checked the fusible link at the battery as well as any other connections I could locate around the solenoid as well as disconnecting the ECM / computer and re-plugging it back up. Typically, after letting the truck sit for a day or so, it will start back up until next time.
View 5 Replies
Have a 7.3 powerstroke won't start.. I have went through tons of parts check everything I can think of. I have put icp, our, fuel pump, fuel pump, injector, glow plugs and relay, fuel and air filter. new starter, new valve cover harness. HPOP is good and compression is good?
View 14 Replies
I have a 98 F150. The motor was replaced three months ago and have had no problems until now. The truck had trouble starting so i put an alternator on it. Fixed for a while and then it started blowing fuel relay fuses. I replaced fuel pump and filter. Truck has trouble starting after sitting overnight. When I am driving and floor it, once it hits about 4,000 rpms, the truck bucks like its the transmission but the rpms drop and then pick back up. Fuel pressure is right where its supposed to be.
View 1 Replies
I had issues with my F250 cranking last winter when the temperature dropped, so I changed out the glow plugs in the spring. I hadn't been able to truly test them yet, since it hasn't been cold, but the other morning my truck wouldn't crank up. It was 40 degrees out the night before, and it had been almost 24 hours since I cranked the truck, but it seems to me like the truck shouldn't have an issue in that mild weather.
I'm not sure what I need to do next to try and fix this problem, it's been driving me crazy and risks stranding me if I park for a while in an area where I am unable to plug by block heater in. The truck cranks fine when I have had it plugged in for a while, so I'm fairly certain it's a heating issue. I haven't done any tests since last year, but I know that the GPR was working properly last winter, which is why I changed out the glow plugs.
View 4 Replies
I have a 2000 F450 with a 7.3. I am having problems starting it. Batteries are good, engine turns over strong. It has started a few times after a extremely long crank (so long I am sure I am burning out the starter). I have replaced the CPS since it was cheap enough but that didn't make a difference. I have unplugged the ICP and it is very oily inside the connection. Does this mean the ICP should definitely be replaced? The truck will not start with the ICP unplugged. Should it be able to start with the ICP unplugged? Other items I plan on looking at at the IPR and possible the IDM box. Am I on the right track?
View 11 Replies
I have a 1998 Ford F150 with 4.2.. Started off a intermittent problem of not starting acct no fuel. Now will not start at all. Checked all fuses and relays.. Am not getting voltage at fuel pump. Changed ECM thinking that was the problem.. Have checked all multi wire connectors for corrosion and tightness. Am at a lost what to try next.
Also, not sure if its related or not. The turn signals and hazard flashers do not work. When I turn on the hazard flashers, nothing happens. If I leave the flashers switch on, the turn signal work. Checked all fuses and relays and they appear good.
View 2 Replies
As I mentioned in the title, I have a 1999 GMC Suburban with about 150000 miles. I love the car, but lately, it has been acting peculiar immediately after starting it. Whether hot or cold weather, the car will sputter, pop, backfire, buck and generally not get up and go for the first 3-5 minutes the engine is running. I can put the gas to the floor and the car continues to sputter along at about 20 mph - bugging the heck out of drivers behind me. If I do lay on the accelerator, however, the car will rev high RPMs as if it wants to go through the gears behave like it's in neutral.
After about 3 minutes of sputtering, the car will again start accelerating as if nothing is wrong. This happens every time I start it.
View 4 Replies
The other day, I started having problems with the truck not starting when at operating temp. Went for a drive and stopped a a scenic overlook, and spent about 30 minutes taking pictures. Went back to the truck, and it wouldn't start. Outside temp was about 95 degrees.
I tried for about half an hour to start it, but all it would do is turn over. There was a work crew there with their heavy machinery, and I was able to borrow their starting fluid. One quick squirt into the intake, and it fired right up.
Although I do have an oil leak from the right valve cover, when I checked the oil, it was just off the full mark. The truck was parked on a slight angle with the driver side being about a foot higher than the passenger side.
2003 F350 w/6.0, 180,000 miles
View 14 Replies
Okay a little update on my truck not starting, and for those who have not read my earlier post. My water in fuel light has been on in my truck for probably a month of use. I drained the water sep under the truck nonstop and added several bottles of water remover and the light would not go out so I assumed the sensor was just bad. (im new to owning a powerstroke btw) I broke down coming home from work, got it towed home, and still cant get it started. It will crank fine just wont fire up. I tried unplugging the ICP, i replaced the CPS, and ordered a new water sep/ fuel filter for under the truck. And the fuel filter on top was just replaced a month before breaking down. Every single time i drain the separator tons of clear water diluted fuel comes out before it turns greenish.
Not sure if this could be a cause of getting water in my fuel but one time i filled the truck up completely and it was like the water overfilled and probably a quart or two of fuel spewed out onto the ground. Not sure where it came from. Also I have just over a quarter tank so i was thinking maybe the float broke and I just needed to add fuel but today before i went to add fuel i drained the sep and tons of water came out... Im so worried about hydrolocking my engine or ruining my injectors. But I dont know if my issue even is water related if the sensor just went bad...
View 14 Replies
2001 F250 7.3l 294k miles
Ok so truck has always had difficulty starting cold since I got it about 12k miles ago. Replaced glow plugs, that made things slightly better but still no start unless temp gauge was in that first line above the C. Changed to Rotella, immediately after oil change starts better and at slightly colder temps.
Since getting the truck when you turn the ignition on you can hear a 'whistling' type noise which I believe is the fuel system pressurising. That used to last as long as the chimes did when you first turn the ignition on. More recently it lasts a lot longer.
Towed recently and had intermittent check engine light - believe this could be HPOP related, haven't checked codes yet as we're on vacation. No oil in the valley. But I do have a little oil carry over in the turbo intercooler pipes.
Truck slightly sluggish at setting off initially and then picks up reasonably well when not towing but my Dyno says I'm putting a bit more pedal to get the same performance from say two months ago
Pretty sure injectors haven't been changed since truck was new but can't be absolutely certain as there is no history. I was surmising this is probably both a HPOP and injector age issue but only from what I've found searching...
View 14 Replies
Got two brand-new Motorcraft batteries installed about a month ago and truck has been cranking great. However, the last couple days in the mornings the truck is starting slow and dragging as if the batteries are going bad. It does crank pretty quick but just has a noticeable starter drag now. Since I have no way of diagnosing the batteries with a tester over the holidays.
What are the odds that brand new batteries are going bad? I was thinking this is a starter issue since the drag is most prominent in the morning but it does it throughout the day while I'm driving driving on each start. But it's not as bad as the first start-up.
I hooked up a scan tool (Forscan and Dash Command) and the only trouble code I received that something to do with the turbo boost pressure fault, it was a code P1247. I don't see how a turbo boost pressure fault, low pressure, could have any starting related issues but you never know. Just a note this code only came up on my FORScan Lite app but it did not come up on the dash command app so I'm not sure if it's a legitimate code.
So I'm back to a battery or starter issue. Is there a way that I can check without much equipment to detect whether not I have a starter or battery problem. I do have a battery charger but no other equipment.
View 14 Replies