Have all kinds of front end knocks and clunks going over bumps and when stepping on the brakes when backing up. Looking to make a parts list to replace everything at once. I see the upper control arm has 2 bushings and a ball joint, the lower control arm has a bunch of bushings and a ball joint. What else should I replace?
View 8 RepliesI have this clicking sound from the gear of my car every time i step on the brakes, is it normal or do i have something to worry about...
View 1 RepliesI have a problem with my Golf 6 GTI '10 - for several months when it rains or when it is wet/humid I've been hearing single irregular dull knocks from the front suspension (sometimes I can hear two quick knocks one after another). Most of the times the knocks are heard from the driver's side (left side) from the front when I drive slowly on roads which are more or less uneven.
The knocking stops when it is warm and dry. My Golf's mileage is 54,000 kilometers. I've checked the suspension many times and everything seems to be perfect.
I've had my f350 7.3 for about 5 years now, she's my work truck so I plow and do a lot of towing. Had moog upper and lower ball joints done about 4 years ago seeing I dident know much about trucks then. As I learned more I started doing stuff myself, did sway bar links cause I was getting a bad clunk going over certain bumps and it totally fixed it. Just replaced tie rod ends and shocks but I'm still getting this clunking it seems when the truck rocks side to side, when I leave my driveway apron every morning I can hear it. I did a balljoint check a few times moving the tire up and down to check for play but everything seemed tight, not sure if it could be bushings or what I'm stumped
View 4 RepliesJust bought a 2001 v10 ford excursion limited with 127xxx miles. I have a few questions.
1. I can't get the front tires to rotate while parked and stepping on the brakes. I thought it was caused by the 35 inch BFG goodrich all terrian tires and a lift kit i dont know how tall but apparently i'm just a sucker. From the searches i did, i think the problem is that either the power steering or brakes doesn't have sufficient pressure to power both at the same time. what is the fix to this?
2. I found metal shaving in the rear differential. For lack of picture, the best i can describe it is that it looks like shaving off an ice block. Also, the fluid is gray and consistency of sludge. I searched and some said the shaving is normal and others said fix now. Which is it? I assume that the rear differential fluid needs to be changed.
For the past year I've had the front end squeaks and crunching from my 06 Sonata LX with 97k miles. It started with just going over bumps, then progressed to basically any movement of the body up and down. It's worse in the cold, but an issue all year.
I just did shocks and struts all around, with the mounts. Didn't affect the sounds at all. At 97k, the original shocks/struts were woefully dead. At least the car rides 10x better now.
Yesterday I changed out the sway bar end links with Moog K80949's. It does sound like some of the "crunching" is gone, and now we're back to just squeaking. I think even some of the constant squeaking over fairly normal roads is gone.
So, what's up next? The FSM suggest the lower control arm, which I'd prefer not to do. Sway bar bushings could be an option, but they looked kind of like a PITA to get to.
2006 with 110K. I did a search for rattles. My question is do these struts have bushings or shims that wear out over time. Going down the road car is nice and quiet. Hit some bumps and it sounds like it is coming apart.
View 5 Repliesthis noise start like 4 month ago. I have taken the car to two mechanics and they weren't able to find where the noise is coming from. i suppose that the problem isnt really that tricky.
is kind hard to describe the nature of the sound.
mostly happen when i go over broken road or bumps where the suspension have to move up and down a little but very quickly
Hyundai Sonata 2006 Front susp noise
I started having an issue when the weather changed here on the East this weekend. When I start my car in the morning the engine knocks for about 30 seconds and then stops. I also recently got an oil change at some local mechanic shop and wondered if that might be the issue. I checked the oil and it was stellar this morning but I'm not sure what kind they put in there. I would assume it's the required type.
View 5 RepliesI have a 2007 Sonata Ltd (63000 miles) and had a clunk in the front suspension. I had the front upper control arms replaced (which were visually badly worn) and that fixed the problem. But now, a several months later another similar clunking noise has developed when I go over those small speed bumps in parking lots.
View 18 RepliesI just replaced rotors and pads on my 2007 Sonata. I got top of the line premium rotors and ceramic pads from Napa. Cleaned the oil off the rotors and gave them a light sanding before installing, made sure that the caliper bolts moved freely and the caliper pistons were not seized and also used new hardware kit (springs?) that came with the pads.
Everything seems to be ok, except for a clicking sound that occurs on hard breaking as the car is coming to a stop. I think its caused by the pads moving within its mounts (I did notice it was very easy to slide these pads into the mountings, more so than in previous pad replacements).
Reading from other posts I think this is still safe, but the clicking does bother me, should I use pad adhesive to stick the pads to the caliper?
2006 Sonata V6. Front brakes only squeal when applying them while in reverse. Happens all the time......cold/warm start, cool/hot weather, dry/humid air. Squeal is extremely loud. I have searched and found similar but nothing exactly like this. Pads and rotors are fairly new and I have removed them and reinstalled and regreased twice. I am using ceramic pads and have never used them before. Is this common with them?
View 8 RepliesI took my 2010 Sonata GLS (86K miles) into the shop last Thursday for an alignment and new front brakes since the old ones were on the wear indicators and doing some squealing/squeaking on soft left turns. Got a call from the mechanic who said the rotors were also shot, so I had them replaced as well.
On my normal commute on Monday and Tuesday this week (approx 10 miles, 95% highway), I noticed that when the car was moving at 15mph or less in a straight line both front wheels were making a noticeable high-pitched squeal/squeak, which went away with increased speed and when braking. I figured it might be a break-in issue but when it hadn't improved by yesterday I made an appointment to have the car checked out by the mechanic again today.
Got the car back today and the same sound is still happening, though now it's in the 60mph range and seems to come and go regardless of wheel direction. The mechanic said he took the brakes apart, found no issues but cleaned and lubed everything as a precaution.
I'm starting to wonder if its the bearings that are shot, but the sound hasn't remained constant as I would expect with a bearing issue. All the parts used are under warranty, so the next step I have available here is to have the brakes and rotors replaced.
The ABS and ESC lights (amber) in my 06 Sonata are coming on intermittently.....
The lights just come on while driving....the ESC switch doesnt have any effect.....the brakes seem to work well....then, after several start cycles the lights will go out and all will be well again....then after a few start cycles and while driving they come on again.
I used the code tester from autozone but no codes are stored...they told me that brake codes aren't always accessible with their hand held unit though....
Also, I have noticed that when turning left or right I get a squeaking from the front brakes now and then,...it was doing this before the ABS/ESC light issue though...
I bought a brand new 2010 Sonata in April 2010. So far I only have 2500 miles on it. The problems I am having are:
1. When I apply the brakes, there is some vibrating sounds coming...
2. The passenger side front tire does not hold air more than 25-26 psi.. If I raise it to 34 or even 32 psi, it drops down to 26 psi within a week and then stops leaking...
I'm pretty sure I know what the problem is since when I hit the brakes it stops. When I took the left side tire off and right side I compared and there is a thin metal sheet that has room to move on the right, but is tight on the left. When the brakes were done before maybe it didn't seat correctly or something. Just wondering what that plate is called so I can order one and change it. Driven that way 2 years, but it bugs me when the window is down and people probably think my car is falling apart. Maybe I'll search for a brake diagram.
Edit: I think they might be called "anti squeal shims". I saw a picture of them, so maybe they didn't put enough high temp grease, but the left side is tight and the rights side you can move a couple milometers side to side so I'm sure that's the jingling noise.
My son just bought a 09 Corolla LE and he gets this clicking noise every time the brakes are applied. The clicking noise comes from the Shifter.
I know that about the Shift Lock Solenoid, but this clicking sound is loud. I have been told that this is normal. So, I thought if this is what 10th Gen owners here is experiencing the same.
So about a month ago my 2013 Sonata GLS started to make some clunking noise going over the littlest bumps over the road from the front end on both right and left side.
I brought it to one mechanic and they said the rack and pinion needs replacing which is an expensive fix. I couldn't believe that was the problem as I had no leaks and it was on their solid. I ended up taking it to my uncles mechanic and he stated its the stabilizer links on the front right and front left wheels. My way to work has a lot of bad pot holes... so I'm hoping that the stabilizers are actually the problem.
Anyways, tomorrow I will be bringing it to the mechanic to have them both changed. I know a lot have been complaining about this issue and instead of replacing the rack and pinion, I thought I'd try and see if it actually is the stabilizer links and provide a fix for some of the sonata owners on here.
My car's rear end is quite unstable on bumps.If the left wheel goes over the bump the rear end sways left and if the left wheel goes over bump,rear end sways left. So far I've replaced left wheel bearing as it had a little play, both trailing arm bushings it had just a minor cut but had it replaced anyway.
Got the car aligned and it was found within spec. I only have doubt on knuckle bushing through which trailing arm is bolted.The catch is i would have to order whole knuckle to replace that bush.
I have been getting this scraping noise coming from my front passenger side tire. At first it would only happen during the winter time and has gotten progressively worse. Now it will do it during left turns and at very low speeds when I'm turning the wheel also.... I checked to see if the tire was getting hot, and if there was anything hanging underneath, and found nothing.
View 1 RepliesMy wife has a 2006 GLS and the top strut mounts need replacing, they squeak during the winter when i go over speed bumps. Since i drive the vehicle more than her (i have a 92 accord that i drive to work daily lol) and i have to modify every car that i own. Since i will be taking the strut assembly apart to change out the mounts it gave me a good reason to purchase lowering springs ( coilovers are not in my budget).
View 1 Replies