Sonata NF (2006-10) :: Rattle On Startup - Chain Stretched Beyond Limit Of Tensioner
Jul 29, 2011
My 2006 2.4l Sonata automatic has just past the 100000km mark and developed a rattle on start-up. Opened it up and the chain has stretched beyond limit of the tensioner and has destroyed the adjacent oil spray nozzle that sprays oil on the sprocket.
This should be a lifetime item? No abnormal usage, normal city driving, all services done, never run low on oil-strange or not. Why this has happened.
View 1 Replies
Advertisement
Yesterday i went to mechanic and changed Timing chain tensioners, with chains and all guides. But still have 2 second voice on startup, once oil pressure lights off everything fine. I paid heavy price on parts and labour but very disappointed after hear same noise again today morning which i was listening from one year purchase of this car... Sonata 3.3l v6 ....
View 4 Replies
Changing timing chain tensioner? Mine is making the rattling noise on startup. Tried searching one internet for any DIY's out there. Haven't really found any good ones.
View 7 Replies
The car has a rattling sound on start up and I read here that is the timing chain tensioner. The quotes for fixing it has been huge(from 900-2000 just for labor).
And I changed front struts and had Monroe put on the car, the ride is very soft and a bit bouncy. I had a 2004 Altima and the ride was very stiff and I loved it. By the way, the car is a 2006 V6 with 111000miles.
View 9 Replies
My son's 2007 Hyundai Sonata had an engine noise that was eventually diagnosed as bad timing chain tensioners. However, one Hyundai dealer repeatedly denied the problem, so it was 8 months before another Hyundai dealer admitted it and changed the tensioners. A couple of months later, the engine light and oil light were on and he was told he needed a new oil pump. By this time, the warranty had expired and he had to pay for the new oil pump and eventually a new engine. My question is this: Could the failure of the oil pump have had anything to do with the timing chain tensioner problem?
View 19 Replies
I have a 2011 santa fe limited with the 3.5 and 35k miles that has a noisy timing chain rattle upon start up after sitting for a few hours,it's my understanding that the cause is no oil pressure to the tensioner because the oil drains back into the oil pan after sitting for a while. Is there a solution for this situation like a spring loaded tensioner-it seems to me that replacing the tensioner and chain does not solve the problem.
View 32 Replies
1.8t has an oil leak. My friend took it to a shop and they told him its leaking from the cam chain tensioner. I've never heard of this. Are they messing with him?
View 3 Replies
On Feb 2015 I had this oil leak developing around the timing chain cover/ oil pressure plug and so i replaced the oil pressure sensor and clean the area and though problem solved...
Fast forward today and the weeping has redeveloped and has gotten larger than last time , its only a weeping issue no visible oil droplet leaks, anyways I took a mirror and when probing around and found the leak origin from the rusty looking timing chain tensioner...that what i think it is.
My question is should I just remove and replace the Rubber O-ring on it or should I just replace the entire timing tensioner unit with a new one, my original timing chain tensioner is sitting at 85k miles. The O-ring is free (i have a kit) and i can do it right now or a New Timing chain tensioner w/ new O-ring is around $20 bucks but i cannot verify the part number ...
View 3 Replies
I have an '09 Tiguan that recently began to start hard. Two days ago, it refused to start and hasn't started since. It cranks and cranks but to no avail. I disconnected the fuel line at the first hard piece on the front side of the head. The primer pump when activated pours gas out of the line for about 5-8 seconds.
I also pulled the coil packs off and verified there is spark on them. I scanned the car with vcds and came up with nothing other than a couple voltage codes (battery is low at this point from cranking and is bulged and showing yellow in the spot window).
Tonight I borrowed the perfectly fine battery from my B6 and attempted to start it. No codes whatsoever and yet it still refused to run.
View 5 Replies
What to do if your timing chain tensioner fails and wipes out the valvetrain. Go to www.vwusa.com and click the contact us page. Find the link for "online chat" and open a dialog with a vw rep. Have the vin, milage, purchase date info handy and tell them what happend.
Maybe I just got lucky, but I thought my (second owner) 2012 GTI with 46000 mi was toast, the rep (Bill H) told me not to worry and set me up with a case number and the location of a dearship that will confirm the damage and replace my engine.
My experience is in direct opposition of what I have read on forums when people take their GTI's to the dealership first, then after hagling with the stealership managers for weeks on end finally end up emailing vw corporate (which takes weeks to respond) and finally having the issue resolved.
Of couse, this is only if your car has not had the warranty run out. I thought that being the second owner voided the powertrain warranty...again that was false.
View 2 Replies
I hear it's a problem on the Mk VI. Is there anything you can do or upgrade to eliminate the problem ... especially considering that it goes out of warranty after 5 years.
View 12 Replies
Got an oil change yesterday and the dealer noticed a small oil leak from the timing cover on my '10 Corolla w/ 71k. Of course they could reseal it for $450. After further investigation, it looks like it is actually coming from the timing chain tensioner. I have seen on the 9th gen this is a common issue, but I haven't really seen anything on the 10th gen. Sometimes, I have noticed a short squeal or squall at cold startup, but it hasn't been enough to really diagnose. It could be some oil on the belt or something else related to this issue. Hopefully the pictures show up.... [URL] ......
View 2 Replies
I have a 98 abe motor 105k on it, since i have had it its had like a lifter tap, im assuming its coming from the chain tensioner. i had the head worked on after broken timing belt about 2000 miles ago still no change.
View 2 Replies
I have been reading about all these horrific cases about the tensioner just giving and causing catastrophic failure. Without all the maintenance records VWoA is reluctant to support 100% even if you're still within the powertrain warranty. I understand these 20+ cases are a small population out of the entire group, but I don't want to risk being another statistical point for this topic. Just ordered the HS Tuning kit and the two snap on tools.
View 7 Replies
2010 corolla bought new 3/29/010 has 43k dealer said timing chain tensioner was slipping and might leak oil wanted $175 to replace shouldn't this be covered under the power train warranty?
View 10 Replies
I have a 2003 Toyota Corolla with a leaking timing chain tensioner. I was able to locate a procedure for replacing the tensioner but it didn't say whether the no. 1 cylinder had to be @ TDC or not. What is the proper procedure for this repair?
View 1 Replies
Can you change the tensioners and guides without removing the chains or getting the cam lock tools ? Doing a in truck repair to fix a squeal sorta noise at start up without the belt on coming from passenger side valve cover that lasts for about 5 sec. oh fyi CRC new freeze off works wonders compared to jb blaster for my tear down so far!
View 6 Replies
How to replace the belt tensioner. It's not putting out enough tension when the engine is cold. So, the belt makes chirping noise for couple of minutes idling when cold with AC on.
I had the AC inspected and everything checks out according to my mechanic.
He believes that the issue is with the tensioner since I had recently had replaced the serpentine belt.
View 6 Replies
I am in the middle of replacing the timing chains on my 1998 4.0L SOHC 4x4 Explorer. I was going to ignore the balance shaft chain but a piece of the broken jackshaft chain tensioner broke the balance shaft chain tensioner too. Now I have to pull the upper pan/ladder frame.
Of course, the manual says I have to pull the motor to remove the upper pan/ladder frame on a 4x4 but I have heard there may be a way around this. How to avoid pulling the motor and still be able to replace the balance shaft chain tensioner?
View 9 Replies
My Sonata has 150k on it and the tensioners have gone bad 3 months now. This AM i got a flashing check eng. light and the car runs rough. Any relation or am I looking at plugs or coil issues?
View 9 Replies
Got the Airbag lamp on, so I checked the fault codes, it says that the resistance o the driver side seatbelt tensioner is to high. Is this just a oxided connection, a bad wire, or should I be prepared to change the tensioner-assembly in full?
View 7 Replies
