Sonata NF (2006-10) :: Grinding Noise At Cold Startup
Nov 17, 2014
Need to determine the noise before I took the vehicle in to be serviced. I don't know if I would necessarily describe this as grinding...to me it doesn't sound like metal on metal..but it's not normal.
Only happens on a cold startup, and even then it hasn't been 100% of the time...probably 80% of the time though.
2007 Hyundai Sonata - Startup Noise - YouTube
I found this thread, Grinding Sound On Statup but not sure it's the same issue. This just started. Vehicle has 150K miles on it.
View 2 Replies
Advertisement
I just bought a 2006 Sonata LX V6 a few days ago and in almost every way it seems like a great car. My '08 GLS V6 which gave me 150k great miles got totaled in November, which really sucks, but I wanted to find another '06-'08 V6. I noticed when I started it for the test drive that the car made a bit of a grinding noise on start up. I didn't think much of it and figured that the warranty from the dealership would cover any problems.(I probably should've checked earlier, but the dealership's warranty only covers cam and lifter noise and engine failure) After I looked into the issue more, I found out that it is a fairly common problem on the early 3.3's with the timing chain tensioners. I'm pretty concerned based on just the nature of the repairs and the cost I've seen for them.
I'm the third owner so the 5 year/60k warranty is expired, but I know there is a TSB out for the issue. I can't find the TSB anywhere but I've heard to have it repaired the car has to make the noise on start, sit 10 minutes, and make the noise again. If it does, the oil needs to be changed and the test repeated again. Since I'm running Hyundai 5W-20 and an OEM filter already, I tried the test on my own. It made the noise on start, sat 10 minutes, and made it again. It is only for a couple seconds, but it's still concerning to me. I guess what I'm trying to ask is if what I've described is covered under the TSB. I really don't wanna have to worry about something like that right now, so my next question is whether the issue I have is detrimental to the motor. My worst fear would be to have the chain jump a cog on the cam gear and slam valves into pistons.
View 11 Replies
I have a '06 sonata 3.3 v6. Let me first describe what was happening to the car before the noise started. When I first started the car and put the ac, the first time turning the steering wheel in either direction the steering wheel would tighten up and the battery indicator light would come on and the fasten seatbelt light would flash even though I had the belt fastened. It would only happen the first time I would make a turn and after that I could turn with no problem. So in recap, it would only happen on the first turn and only when the ac was on. Now when I start the car up there is a noise coming form the pulley/belt area. I wouldn't classify it as a squeaking noise more like a grinding. I've looked at the belt and it seems to be fine. After I start to drive the car the noise goes away. If I start the car again after a drive within about 2 hours the noise doesn't happen when I start it. What this noise could be? and also could the noise and the steering wheel tightening when the ac is on be connected?
View 1 Replies
My G1 prius (2001) started making a grinding noise when I start it up in the morning. There are no warning lights (yet) and it drives fine, but that noise can't be good -- something will fail shortly. I've searched the internet quite thoroughly and there was one similar problem reported, which ended up being linked to the ABS pump. The noise seems to come from the inverter, or somewhere under the inverter. I took a video of it and posted it here.
View 19 Replies
I start noticing a weird noise upon cold start up. It sounds like something is grinding. First goes starter sound and then engine noise together with this grinding noise. Grinding noise goes away within sec. or so. It is not really loud, but it definitely not engine or starter sound.
It happens only on cold starts when engine is completely cold. If I start engine, let it run for few minutes, shut it down and restart again, it starts without grinding noise. Don't remember if car was doing it from beginning, never turned car while I was outside. Few weeks ago when temperature dropped below freezing point, I turned ignition through passenger door to warm up the engine.
After that I begun listening every start up. Every start up same noise. Every morning and every time after work I hear this noise. No noise if car been driven recently or engine is still warm.
Not my car, but sound is identical : [URL] ......
View 14 Replies
I have a 2008 Hyundai Sonata 2.4l with ~235,000kms (~147,000 miles). It has been well maintained and has been a great car. It has been developing an engine tick noise at cold startup and it seems to be very gradually getting worse over time. This noise is most evident immediately after strarup and gradually dimishes over a period of about a minute and varies in terms of how noisy it is and how long it lasts. This nopise is never heard when the engine is warm. From what I have read online, this can be caused mainly by two things:
- use of an aftermarket oil filter
- timing chain tension insufficient
Late last week I changed the oil filter out from the Purolator Classic filter that I have been using for years to a genuine Hyundai oil filter. This did not make any noticeable change in the tick noise so I do not believe that this was a contributing factor.
Over the weekend I removed the valve cover and checked the timing chain tension. It was taught as it should be. I could push it down a bit between the camshafts but it would spring right back up. I also used a videoscope to look down inside the cam tunnel and found no evidence of the timing chain contacting any metal or the oil drip line for the lower timing chain sprocket. Everything appeared to be in order.
When I started the engine to confirm no leaks around the valve cover, I used a mechanic's stethoscope to check for the noise. I was unable to isolate it as the engine tick did not occur at that time. The cause of the tick noise continues to elude me, but I have ruled out the two common causes (oil filter and timing chain tension).
View 4 Replies
My 06 Sonata runs very rough at start up when the car is cold. It appears that it is missing on several cylinders. This last for about 15 seconds and then the car runs fine. What could be causing this problem? No check engine light.
View 10 Replies
I am having a new problem with a clunk when I brake my 2009 Sonata. It only happens the first 1-2 times I brake while going forward. In other words, I back my car down my driveway, no clunk. Then when I drive down my street, the first 1-2 times I brake it will start slowing and then suddenly I will feel the brakes grab and it feels like a clunk (although now real audible cluck, just the feeling). after the clunk my car continues to slow as normal. The rest of my ride I do not feel it. After I get out of work, it does the same thing as I am headed home.
I have never felt this before, and find it strange that it only happens after the car has been sitting a while and goes away after 1-2 brakings.
View 8 Replies
Sometimes I'll walk my wife out to the garage in the morning when she is leaving for work. When she starts up her 2006 Dodge Grand Caravan FWD sto n go I hear a clicking noise for about 2 seconds. To me it sounds like the lifters prior to getting the oil delivery. I was wondering if that was going to eventually cause some engine damage and also if there is a problem with the oil pump or something like that. Is this a problem that I should check into or is this normal for this van. We hit a deer several months ago and the whole front end was wasted. I don't remember hearing this clicking sound when the van was newer.
View 10 Replies
I hear a squeaking noise when I start my car. It is mostly in the mornings. Sometimes other parts of the day also. I believe it is on cold start because I usually hear it when the car has been sitting for a few hours.
My first thought was that it may be the belt so I popped the hood and looked at it. The belt seemed nice and tight and there were no cracks or extensive wear on it.
Second thought was brakes. My front brake pads are good but rear brake pads are close to needing replacement. Sometimes when I brake I hear the squeaking noise but it is hard to tell because at time it feels like it is coming from other cars.
Could the brakes be the cause of this sound? Even though it is at start up and not constant.
Car is 2007 Sonata with 100k+ miles on it.
View 3 Replies
so with the weather turning cooler i have noticed a new noise. i am at 34,000 miles and run synthetic oil ever 4-5k miles.
I hear a rattling/knocking noise when you start engine, not right away, but like after 15 seconds and it lasts about 30 seconds then seems to go away and is quiet again.
Almost sounds like a lifter is tapping due to not getting oil.
I changed the accessory belts a while ago and it did not first make this noise right after but maybe a few days after which coincided going from 80 degree weather down to 40 degree weather.
Could it be an accessory belt being too tight? If so, why wouldn't it make it on startup? I can see it going away as rubber expands as the warms but I would expect it to make the noise from starting till then. Not 15 seconds into running.
View 220 Replies
Just put on eibachs and car is randomly making a grinding noise when slowly accelerating or braking.. Also noticing a fairly loud clicking noise when going in reverse. The noise isn't consistent and seems to happen more right after startup. I haven't gotten the alignment done yet and was wondering if this could be the problem. Will try and post a video soon.
View 8 Replies
Have a '06 V6 GLS w/ approx 105K miles. About a week ago I started hearing a noise. The noise sounds a lot like a brake pad wear indicator, metal grinding on metal. However, the noise does not seem to be related to use of the brakes. The noise only occurs when the car is moving. It is intermittent. Comes from the front of the car. Seems to usually occur when making a sweeping or gentle right turn. Speed does not seem to matter - can be going 20 to 60 mph. Noise will last from less than a second to as much as 5 to 10 seconds and then goes away.
I have taken a cursory look at the crankshaft damper pulley and it appears to be ok...
View 12 Replies
I have a 2009 Hyundai sonata, 2.4, 5 speed manual, gls, when I press down on clutch whether from a stop or when shifting, I get a loud grinding noise and the radio goes dead at same time!, I know it is the starter attempting to "engage", at least that's what I believe it to be, it also "'starts "from, the "on " position when I press on clutch.
View 8 Replies
A few days ago, my Sonata 2006 LX started making weird noises when driving at low speeds. The noise comes from the front driver's side area, they are not affected by steering or going over bumps. Usually get less intense when I accelerate or brake. At speeds around 5 mph, the noise is grinding and pretty loud. At higher speeds, it's more like banging and it's frequency increases with the speed. There was no effect other than the noise, but the last day at higher speeds, I can feel with the steering wheel a little vibration sometimes from the banging.
I've been having tough times renting a car during the weekend and I still drive on short distances, but I'm afraid it could be a safety issue or that I can be making things much worse to repair. The noises got worse since the beginning, but I don't think they are getting any worse anymore.
View 3 Replies
Long story..couple months ago while coming home my 08 Sonata 2.4L manual 84,000 miles...started making this grinding noise and would stop when I pressed the clutch in and then sounded like something was grinding near the passenger front wheel.. well I get it home and the next morning my husband and I ride up the road so he can hear it.. was going to take it to the shop but it stopped and ran just fine till the other day.. crank the car and its fine.. once it gets warmed up and a few miles down the road it makes a knocking noise...but only when I let off the gas or idling .. even pressing on the gas just a tiny bit made it stop (even tried in while parked in the driveway with the hood up to make sure the engine wasn't just drowning it out) well I took it to the local dealership today and they said it was the flywheel and that it and the clutch and bearing needed to be replaced..
View 3 Replies
I am now getting a grinding noise when I shift from first to second gear. It sounds like the two metals rubbing each other. Its not happening all the time, but for the past two days a bit frequently
I had reported this grinding noise when I turn left a month back. Was thinking because of my worn out tyres, but apparently not.
View 8 Replies
I just got the car back from repairs, there was a loud grinding noise coming from the left side of the engine. It turned out the whole rack and pinion setup was pouring out fluids and needed to be completely replaced also while it was in there they checked out an oil leak which ended up being the front valve cover and replaced a dead O2 sensor. The car has 99,300 miles
View 6 Replies
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
View 3 Replies
I have a very slight grinding noise coming from the PS pulley area. Its possibly bearing noise although its hard to say. Is there a specific torque requirement. Any good parts...
View 1 Replies
I'm at my place in Florida 1,000 miles from home, and when I started the car in a mall parking lot, there was some grinding metallic noise for a few seconds and I couldn't get it into first or reverse and the clutch pedal was way down. I was able to get going in 2nd and eventually the clutch was back to normal and I could get 1st and R. What happened? Broke some fingers in the pressure plate? Seems to run fine now but have a 1,000 mile ride ahead in the morning.
View 1 Replies
