I just noticed it this morning. When I step on my brake pedal, all 3 brake lights activate, then they start to sporadically blink, I don't think it's a fuse problem, since the 3rd brake light also blinks, and I believe it runs independent of the regular brake lights.
What to check.. No codes are being listed, checked that with my Scangauge II already. (2006 GLS)
I recently installed an aftermarket rear spoiler with third light. While searching and testing for a hot brake wire to hook up to, I somehow accidentally shorted out the brake lights. They will not come on when i step on the brake pedal.
I checked the corresponding fuse and it is still intact. The brake light symbol on the dash is "on" so I know the "brake light out" sensor is still working....is there something im missing in getting the brake lights to work again ?
About 9/10 times when I step on my brake pedal (speed has not made a difference) I can hear and feel a hard knock under my car by my resting left foot. Started a few weeks ago. Haven't had work done to my brakes since May 2015 so I am thinking it is unrelated. What the issue might be?
View 2 RepliesI have an electrical problem with the rear brake lights on my 03 Camry. The fuse keeps blowing the instant I step on the brake. I replace it and it blows immediately. So now i can't drive it because I have no brake lights. I'm thinking there is a short somewhere, where to start my troubleshooting?
View 4 RepliesWhen I press the brake pedal, the car will stop. But if I keep pressing it while the car is stopped, the pedal wants to keep going towards the floor. I have to press hard for it to do this. I have bled the brakes. I've checked the calipers and the hoses for leaks and don't see anything. The master cylinder is topped up and I don't see any fluid underneath it. It doesn't appear to be leaking. The funny thing is, when I turn the engine off and press the pedal, the pedal comes to a stop and doesn't want to move after I pressed on it as hard as I can.
View 2 RepliesMy dad drives an '06 Sonata. And he recently broke a brake line and had gotten it fixed. His current problem is that his brake pedal hasn't returned after getting the line fixed. What can he do to fix that? The pedal is really low and is spongy. And his ABS and ESC lights are also on.
View 4 RepliesI have a 2007 Sonata GLS 4cyl. Anyhow lately my brake pedal is going right to the floor. The brakes seem to work fine, but if I keep constant pressure on the pedal it will slowly go all the way to the floor. My rear rotors and pads have been changed a couple of months ago and I'm pretty sure my front brakes are good. What could be causing this? I also checked underneath the car for leaks and there doesn't seem to be anything leaking underneath.
View 6 RepliesI drive almost all the time in stop and go traffic and my knee hurts because the brake pedal is too high. My wife also noticed that the brake pedal is unusually high. Is there any adjustment I can make to lower the brake pedal?
View 2 RepliesIn my 2010 IV, the brake lights activate on the late side. I can only roughly measure it, but brake lights go on when the brake pedal is depressed at least 1.5 inches. I am used to brake lights in other cars activating with a light touch of the pedal.
Problem is: this really ratchets up the danger of tailgaters, who cannot see when you are beginning to stop. Occasionally, a driver who has been trailing me asks if the brake lights are working properly.
I have a 2003 Honda Odyssey and every time I step on the brake pedal, it blows my STOP fuse under the hood (which takes out my ability to shift out of park, use my horn and the brake lights also go out.) When I replace my fuse, the horn does not blow the fuse, it is stepping on the brake pedal one time, even when in park before turning the key over.
Things I have tried: Changing all of my bulbs and inspecting the socket areas, inspecting most of the wiring and taping areas that seemed fine but might have been touching metal, replacing my brake light switch.
What could be doing this?! I have figured out that I can manually shift out of park using the override slot, but no brake lights is not good.
I have a 2010 Mazda 6 with an unusual issue. When I step on the brake pedal it resists for a quick moment then seems to "collapse" and go to the floor. The resulting braking is affected, but almost unnoticeable. When I quickly release the pedal and re-apply pressure the pedal doesn't quite "collapse" as bad, but still is not as resistant as it normally is. I have taken it to the dealership three times for this issue and they can find nothing wrong with the car, the brake pedal or brake systems. It doesn't happen all the time and is not weather or outside elements specific.
View 4 RepliesI tried to turn on my car, and the brake pedal was hard and the car wouldn't start. I did a search on the forums regarding the brake light switch. I tried the 30 second hold the start button, car would not start. Radio/lights works fine so I don't think it's a battery problem. My g/f said she can see all of my brake lights turn on when I try to depress them. I'm kind of a lost. It was working fine earlier this morning.
View 6 RepliesThis afternoon while I was driving home from work I heard a minor squeak so I put the windows up and the radio off. t I heard my brake pedals chirp. It's a small minor squeak, but I hear it and it's bothering me. Am I over thinking this?
View 20 RepliesMy Sonata 2008 2.4 produces a single click as I press brake pedal, somewhere half way through. You can hear it and feel it with your foot. I think it clicks somewhere inside the hydraulic system of the brake.
View 13 RepliesHave a 13 Sonata Limited 2.0t and for some reason it won't start.
Also brake pedal is extremely stiff. Tried to push start button several times while pressing brake, and dash lights just blink several times.
So I took the pads off and saw pistons that push caliper against rotor were to far out to install new pads. (rear pads were still intact, both front pads were out when i pumped) So im pumped the brakes thinking it would reset them and alls it did was push the fronts out more.. I noticed fluid leaked out of the pistons after fully pushing them out.
After seeing that pushing the pedal only pushed them out and didn't reset them, i pryed them in with a C wrench. Was quite difficult but managed to do it. Note I only did this on the front pads..
Rear was just fine, piston went back in easily. I filled brake fluid fully and still does it - Now pedal hits the floor when i first hit it and seems very light when braking.
I have only 42k km or 26 k miles. Brake stops but soft. The brake pedal sink if you apply pressure after a stop. Feels like someone open a valve. The pedal go to very low. I am find the stopping power is poor. Brake fluid is brownish. I hope it is not the master cylinder.
View 20 Replies2009 Limited, 3.3L, 65000 miles.
Car starts, check engine light and ESC light come on. The car has no throttle/pedal response. It will not go above idle speed and it doesn't matter how much the fuel pedal is pressed. So we've turned around and returned to where we started.
The first time I let the car sit for five minutes and started it. No problems for four weeks. Yesterday, we tried that four times and that didn't work. I disconnected the battery for five minutes and the car works normally again.
I have 2011 SE, it won't start at all. The car won't start all thou all electrical are working (radio, NAV, Dashboard) but when trying to press the break pedal is hard as a rock. Dashboard computer at times tells me to press the break pedal - but it wont start, it actually turns off when i press the break and hit the start button. It happen twice before was able to start it within couple minutes.
View 24 RepliesNoticed when I press brake pedal brake lights does not work even the center one. Checked all fused in the car and the small ones under the hood. All fine. I have a long trip tomorrow. Where else i can look. Everything seems working. Reverse light is fine. Is that related to latest brake light switch recall? Cant think of anything else.
View 4 RepliesSo I was following my wife today and noticed she had no brake lights. We just had the car in for servicing a couple months ago and at that time they noted all brake lights were fine. I wouldn't expect all of them to burn out at once, but I did replace one just to see (had an extra from last time since they come in twin packs) and that one isn't working either. So I was searching and I'm guessing it is the brake lamp switch.
YouTube ......