Santa Fe (DM - 2013+) :: Seat Belt Light On And Annoying Sound After Unbuckling With Bang
Apr 16, 2015
adjust the electrically adjustable seat to her position. Since that is quite further forward than my programmed position the seatbelt was quickly choking her. So before I knew (I was sitting next to her) she unbuckled, with a bang.The bang was because there was quite a lot of pressure on the seatbelt.
No harm, nothing broken, at least ... until I heard the ping ping ping sound even though both of our seatbelts were in their sockets or whatever you call them. Inserting again, no change. Still the 'seatbelt light' on + the annoying sound.
Should I try to open the seatbelt socket/block/the thing where you insert your seatbelt in and see if there is some broken wire inside ?
View 2 Replies
Advertisement
This morning I asked the Hyandai dealer in Hilton Head, SC to repair the passenger seat belt warning bell in my 2014 Sante Fe. They said there was nothing wrong with the warning bell and that there was no error code in the system. They also claimed that the passenger front seat was not designed to have its own warning bell. Strange since it had always worked that way before. After a fairly long discussion it seems they did not want to fix this safety issue because it apparently involves replacing the seat.
View 3 Replies
For a long time my 2004 regular cab truck has a quirk that both the driver (and passenger if present) must click their seat belts before starting the truck. If not, the seat belt chime and light flash, even though the seat belt light is off when the alarm is not sounding.
Even if the truck is in park, and the passenger gets out of the truck and back again with the engine running, once in drive it will start the seat belt alarm with everybody properly buckled.
A few months ago I was driving to work and the airbag light started to flash.
I took the truck in for the air bag wiring harness recall, and the airbag light did not flash since then, and for a little while the seatbelt problem went away.
1 month later the seat belt quirk was back again.
This past weekend the 5x5 air bag alert started. I checked previous posts, and confirmed that my air bag light does not ever light on my dash. I don't remember if it ever came on once the recall was "fixed".
My gut feel is that the wiring to the light is fine, and that this is a wiring problem in the harness. I saw a post that made a vague reference to the air bag sensor under the center console and the seat belt circuit and could find no more.
Looking for a wiring diagram? If the airbag light is out, does the 5x5 alert supposed to indicate that the bulb is burned out, or that the bulb is out AND there is an airbag fault?
View 9 Replies
Is there a way to disable the audible portion of the seat belt warning?
View 5 Replies
I just got my clazzio seat cover yesterday, spent the whole day installing it. I'm up to the last seat (rear passenger side) where i need to remove the seat belt.
I'm having problem removing the seat belt. Tried with several different tools, including variable speed tool, and even tried turning it to the right in case it has different direction to unbolt, but it just wouldn't turn at all.
I called the dealership, but no luck. So i'm now stucked with all but 1 seat being covered. I went to some shops today, most wouldn't touch it because it's liability issue.
View 7 Replies
2007 Sante Fe Limited original owner. 87000 miles, great car. Having a problem with battery light coming on and then going off, also seat belt light off and on but no sound. The other night my ESC light came on for a while. New battery, alternator and serpentine belt installed a few months ago.
View 25 Replies
Going down the highway the other day my '07 SE started to flash the battery and seat belt "dummy lights" in the instrument cluster. There was no discernible change in power, other lighting, or anything else that I can tell. The lights didn't seem to flash in any particular pattern either....
What this might be?.....other than gremlins?
View 38 Replies
I have just purchased a 2009 Hyundai Santa Fa and was wondering as to why there is no warning when I get in the car telling me to put my seat belt on either audio/visual.
How you turn it off but I am asking the opposite, no matter how annoying that sound its safer to have that belt on.
View 3 Replies
2015 AWD. How do you fully turn off the traction control?
Seems like i can press the button and it comes back in a minute. I tried holding it down.
Also, the seat belt chime. I take off my belt once I get in a parking lot, and the chime is annoying as hell.
View 14 Replies
I have a 2009 Sante Fe AWD: What it means when the battery and seat belt lights flash on the dashboard while driving? The headlights also dim slightly and sporadically as if there is a huge load on the system. No noticeably pull or drag while driving.
View 5 Replies
Loving my Black on black ES350 so far with 4000 miles, bought July!
Having a very annoying rattle/creaking near the seat belt pillar on the driver's side? This occurs continously even on smooth highway roads. I will ask them to check it out at the 5k service.
Also, my steering wheel slightly "clicks" when turning the steering wheel 1 full turn to the right. It doesn't do it on the left side, and doesn't seem right. No turn signals or anything is on. Just seems flimsy with all these noises!
View 14 Replies
I wear seatbelts and make sure passengers wear them too while driving. However, many times I keep heavy boxes on the passenger side seat...
And I am sure you all know how irritating that warning sound is (for 24 secs)
How do i disable it in 2007 Toyota Camry LE ?
View 14 Replies
How to disable the seat belt warning sound and or the passenger side airbag warning sound?
View 7 Replies
The 40 of my 60/40 split seat rattles. If I fold it down it doesn't make a sound. I notice the rattle when going over bumps/cracks on the various Canadian roads. I did some investigating and found straps underneath the seat. One seems to have snapped off. What the straps are for? They are hooked to a bar half way underneath the seat and go to the back of the seat.
View 19 Replies
I have a 2007 Toyota Camry LE, and the seat belt light keeps on flashing and the airbag light is solid. We have tried literally everything possible, tried replacing the seat, replaced the seats sensors, tried a airbag module out of another 07 camry with exact same part #. Toyota have diagnosed that all the systems for airbag is fine, except it has something to do with the seat belt of the drivers side/or module but all that's been checked and still no luck. My car is due for Safety inspecting coming month and need this to fixed. How to handle this. Btw light came on because we had a blown fuse for the drivers power seat, and my mechanic thought that it was the motor so we replaced the seat and noticed that it wasn't the motor. Was just the fuse and we put back the original seat and everything is functional except the lights came on. No accidents on it to the extent i know. and the wiring is all plugged back properly without anything like wiring damage.
View 9 Replies
I have a 2003 Montana which has the airbag light illuminated. Also no matter if the seat belt is locked in or not - no seat belt light ever comes on. I have a code scanner but it doesn't scan airbag codes.
View 4 Replies
No Beeping sound for passenger seat belt, just flashing sign on the dashboard. Just want to see if this is normal or not? ( I would assume it should not be).
If so, I could go to the dealer and get it fixed. This is for 2013 Sonata GLS.
View 7 Replies
The plastic piece that forms around the passenger seat, where the level is to adjust the seat back, has broken. It looks as though the area where the screws are that hold this piece in are not very sturdy. I have only had this vehicle for 10 months now and I am hoping that this is something that is covered by warranty.
View 6 Replies
This noise is driving me crazy and i can't find out what's making it. When I go around a tight corner, I get a sound that sounds like a small metal ball rolling across thin metal. It almost sounds like what I imagine a ball bearing rolling around in an aluminum roasting pan would sound like.
It's coming from the general area of the driver's seat. It's not very loud, but loud enough that it's driving me nuts. Something is definitely rolling around somewhere, but where to start looking.
What it might be or where to start looking? I'm tempted to pull up the carpet and see if anything got under there, but I doubt there's enough room between the carpet and floorpan for something to roll around this freely.
View 1 Replies
How do you stop the seat from going all the way back on its own when you turn the engine off?
We have two kids in car seats in the back and it gives them no room to get out.
View 5 Replies
I noticed today that the temp got to be about 70 degrees today. I went to put on the ventilated seat, but it did not blow cool air. when I first got the car, it felt like as soon as I pushed the button cold air came out, It actually felt weird at first.
Now I can hear the fan going if I turn everything down, but it did not get cool.
View 6 Replies
