Santa Fe (CM - 2007-12) :: Radio Stalled By Bluetooth Pairing
Feb 13, 2016
My 2010 Santa Fe came with the GPS, backup camera, satellite bluetooth capable head unit. It started acting up after being parked for 4 months. I noticed a delay in the display response to a setting change. Change an FM station preset and it would take the head unit 20-30 secs to show that change.
Did everything suggested, reset unit several times nothing worked until I de-paired all bluetooth devices. Now it works great.
View 1 Replies
Advertisement
Just picked up an 08 460L with navigation and was looking to sync my Motorola Droid X. I have successfully paired the phone for voice communications using the instructions in the manual but when I go to transfer my phone book the car just says transferring. I left this for about 10 minutes and no numbers moved. The phone says Paired for audio is this would be my guess as to why this isnt working. Any tips to get my numbers imported?
View 14 Replies
Have bought me two different bluetooth devices to my passat 2012. Now what I should use.
One is called 7P6 035 730 J and the other 5K0 035 730 D.
View 3 Replies
How to pair my iPhone 4s. 2011 Tiguan s with base radio and base MFD. rental with no owners manual. When I go to the available connections on my phone it asks for a pin....
View 4 Replies
I have a 2007 RX 350. I just recently started using bluetooth. It was working well and then all of a sudden I have an issue after a call. I hang up my phone, but the screen still shows that it is talking; although, no call is being made. I have to stop and start car to get it to clear, so I can start again. However, it will only work once and then it still won't hang up.
View 12 Replies
So i have been trying to pair my phone to the car, but i always get a "Microphone not connected" message. I have attached the picture. The car detects the phone's audio media, but can't seem to be able to make calls using the Bluetooth. I remove my phone from my car's system and reconnect it. But once it is paired up, i get the same message as below.
View 14 Replies
I get my iPhone 5 paired with my car for calls and music but not for messages. Is there a trick to doing that?
View 1 Replies
I'm having troubling pairing a phone to the Bluetooth system. I worked fine with my plain-jane Sprint cell phone as well as my kid's iPod. However, when I pair my wife's phone the car's phone system does not see the device after a few seconds.
View 8 Replies
I bought brand new 2013 Camry SE yesterday night..it has been just 15 hours since I bought it..today morning when I tried to pair my phone with car multimedia system...it showed the screen that it is connecting and the little circle on the top right was moving in circle as if it was trying to connect and all of a sudden it just got hang up...right there....its not going any where...now.
Is there a way to reboot this multimedia system (just like you can reboot computer or phone)..??
I tried turning car on-off...tried setup -default on bluetooth settings etc...but no luck.
View 4 Replies
Just took delivery of my 2005 SC430 (Egyptian Sand, white leather, 55k miles. Lovely vehicle.) which I thought came with Bluetooth.
However, when looking to pair my iPhone 4S the 'Phone' icon is not present on the ML Nav Info display screen, suggesting that maybe Bluetooth is missing? I confirmed it's a 2005 from the VIN.
When I depress the little button below and behind the steering wheel volume buttons (left side - this is a US car) I get a voice saying 'No cassette inserted' or words to that effect, suggesting it's a cassette control button, not a Bluetooth one. The Nav instruction book which came with the car specifically refers to the presence of Bluetooth.
How to find if I have Bluetooth or not? My iPhone cannot 'discover' anything.
View 8 Replies
I bought a used 2007 Santa Fe limited 3.3 last year. I'm currently at 98k miles. I replaced fuel Spenser's, added remote start and a curt hitch, did the head gasket service, did a maintenance to replace spark plugs and coolant.
Everything was ok ( although noticed with our single digit temps the engine was slow to start) then yesterday happened. Starting car in driveway and I got a check engine light. Tried restarting car and it stayed on. No problems. Drove about 15 miles and parked car. It sat for for three hours and then used it to go a few miles up the road ( engine light came on). No problems.
Had lunch, restarted car, light on, and Then oil can red light came on. Drove about 5 miles and while slowing down for a light I felt the power steering go, car stalled, and I couldn't restart. Never heard any whines or shrieks. Pushed car into a gas station and tow truck came. He tried to jump it ( it clicks when I tried to start it but it never turned over) and if his power supply was on and I tried to crank engine it made no sounds. Towed to a shop where mechanic tried same thing. Same result. They put car on rack and tried to manually crank engine. Couldn't budge it and told me engine seized. 4500 estimate to replace engine.
Took my own mechanic out to car ( night and freezing) and he did a few other checks and agreed that engine seized but thought it was weird I didn't hear the whine of the ball bearing getting shredded. Thinks a sensor blew, causing oil pump to fail, causing engine seize.
I'm now reading about multiple issues with crank shaft sensors and pulley separation and it seems like that is a possibility however I can't get my car to turn over at all. Granted it is freezing out here.
View 14 Replies
Wife called me this evening saying she's stuck at work. She was parked in a parking garage on the 3rd level, she started the car up, coming down the ramps of the garage and on the first floor at a stop sign, the vehicle stalled out on her. She went to restart it, but it will not turn over. I come out and tried to start it with no luck. I did notice on the positive side of the battery terminal there was a lot of corrosive discharge. I cleaned that all up, but still no luck. Everything has power, bright interior lights and headlights okay. I originally thought it was just cold or lean... But still won't kick over.
View 11 Replies
My 2011 Santa Fe stalled while I was going 60 mph on a major freeway at 10:30 pm. It was very dangerous and scary, but I was able to pull off to the side of the road and get towed to safety. The "malfunction light" came on and the dealership said it had a code of PO638. They were aware of the problem and performed a software upgrade.
View 6 Replies
I have a 2010 Santa Fe Ltd with the nav system and can not pair either my Blackberry Classic (Operating system 10.3) or a Samsung Galaxy phone to the car's Bluetooth. Note: My phone is set to Discoverable
I have tried repeatedly using the standard pairing process and it doesn't recognize either device. It simply times out after a few seconds. I push Setup button and the prompt on the nav screen says "Connecting to Windows phone". Does this mean that this vehicle only pairs with a Windows cell phone?
View 1 Replies
Noticed that bluetooth audio (music) streaming from my iPhone cuts out completely when I enter an underground parkade. Even if the iPhone is connected with the cable.
View 2 Replies
I'm able to pair my iPhone 4 with my LS460. When I turn off the car or start the car the pairing will not remain.
View 14 Replies
My 2008 Santa Fe has an xm radio. All of a suddent the display is out. The backlight comes on but no lcd display??? The radio itself works fine
View 3 Replies
I am having a problem with the stock radio resetting itself after turning off the car.
Just recently had to replace the battery which was not an issue. After the new battery was installed I set the clock, cabin temp, and radio stations. Came back to the car later, turned it on and noticed the radio was off. Hit the power button and it came on with the default stations, volume settings, etc. This happens every time the car is turned off and left for more than a few minutes. What's odd the clock and temperature controls DO keep their settings. It's only the radio that's the problem and resets back to it's defaults.
How to correct this?
View 16 Replies
So it worked fine, then one day I get in and start it up and I get a "no connection" message. I can change back and forth between XM 1 2 & 3. But I cannot change stations or even scroll to my radio ID.
View 9 Replies
My 2011 santa fe radio turn off by it self and come back on when ever he want. It start this 2 weeks ago, some day everything work fine, and other days is doing this. What the problem is? Its the basic radio not the infinity.
View 4 Replies
My radio completely shuts off in my Sante fe. But after several minutes it turns back on. Then off again, then on again.
View 3 Replies