Santa Fe (CM - 2007-12) :: Low Beams Keeps Going Out
Jan 21, 2013
2007 Hyundai Santa Fe ....
Annoyingly my low beams keep going out. I can replace the bulb and it works for a short while but than again fails. Because of this when driving at night I have just been utilizing my high beams, but since inspection time is coming up I need this resolved. The fuse is intact, and I don't want to waste another set of bulbs if I can avoid it. I am uncertain if it is related, (as it should only affect the tail lights in theory...) but this issue first showed itself a month or so after getting my trailer hitch wiring installed. What would the next suggested check be?
View 8 Replies
Advertisement
I have a 2007 Hyundai Santa Fe. At first just the left head light went out, the next night I tried to turn my headlights on and they didn't come on. The high beams work but the low beams doesn't. I've replaced the bulbs from assuming they went bad. That didn't work, so I checked out the fuses, all of them were good. I don't know what else to check.
View 3 Replies
I've seen a couple posts about low beam lights not working suddenly, but no real fixes to the issue. Looking for an actual fix that worked.
My lights; running, fog, high, and low beam, all worked yesterday. This morning when I try to go to work, all but the low beam lights work. Nothing was done differently, all fuses and relays appear to be intact, and the bulbs appear to be fine.
View 12 Replies
Like on most Chevrolet's or other cars, when you unlock your car with the remote, your headlights come on for awhile. I've tried to 'unlock' this feature with a scanner but the only option I was able to change was the auto lock door function. Is there any way to activate this feature (if possible)? If its not possible with a scanner. I have a '09 Santa Fe Limited, w/ Auto Lights w/o DRL.
View 10 Replies
08 SANTA FE, NO HI OR LOW BEAMS. Daylight running lites work, fog lites work, checked all fuses, relays, and bulbs,& connectors.
View 9 Replies
The normal lo-beams won't turn on no matter what I do, but the brights still work. The bulbs are good, the fuses are good. I've tested and changed those. They're good. 2008 Santa Fe ....
View 13 Replies
My low beams won't work. High beams and fog lights work just fine. We just replaced both bulbs a few months ago so the chances are pretty slim that it's a blown bulb.
I've checked the fuses and relays. I switched the low beam and high beam relays with no luck. Still no low beams.
View 2 Replies
Replaced bulbs and checked fuses ... if u bump high beams they will flash ...
View 9 Replies
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 Replies
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
View 5 Replies
I want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.
Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!
P.S. 2005 Toyota Camry
View 7 Replies
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 Replies
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
View 2 Replies
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
View 6 Replies
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
View 13 Replies
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 Replies
I've ran into an issue with my high beams on my 07 Camry SE. All lights are working except high beams. When you switch to high beams the lows only stay on. The dash light comes on and shows high beam indicator, but no brights! Fuses look good, and so do both bulbs. Going to go buy a bulb later today just to try. Like I noted they both just suddenly stopped. I'm leaning towards dimmer switch on column now.
View 11 Replies
I love this car- i just bought it , but it has one problem i cant figure out .The high beams didn't work at all -till my mechanic figured the prior owner took out the two fuses - now they stay on all the time - even when the car is turned off . My guess is the light switch - my mechanic said it is probably more than that...
View 3 Replies
I have a 2015 460LS and having trouble with setting the auto high beams. I have the lights set to auto , push the stalk forward and press the auto button; however, the brights do not go off when approaching oncoming vehicles at night. Am I doing something wrong, or is there something wrong with the car?
View 13 Replies
I have an 07 with the AFS lighting. bulb error on dash- as I understand it, this has to do with a faulty shield for the high beam on the passenger side. Can this be repaired? Or should I just shell out the 300 for a used one on ebay.
View 3 Replies
Prior to me switching out the high beam bulbs, they were both aiming correctly. After I switched out the bulbs, both high beams are aiming up in trees literally. They arent even close to lighting up the street/pavement. I was wondering if I may have installed them somewhat cockeyed but I thought it was odd that I would have done both of them the same since they are both equally up in trees/same overall height.
View 2 Replies
