Santa Fe (CM - 2007-12) :: How To Program 2008 Hyundai Keyless Remote
Feb 25, 2012
I purchased a NEW 2008 Hyundai Keyless Remote on the internet. It didn't come with programming instructions. How to program this remote.
View 15 RepliesI purchased a NEW 2008 Hyundai Keyless Remote on the internet. It didn't come with programming instructions. How to program this remote.
View 15 RepliesHow do i program my keyless entry remote to my 99 grand am?!?
View 3 RepliesI have a 2003 Camry I4. My RKE stopped working. First I checked the battery in the remote, it reads 3v like it should. I searched and found how to reprogram the the receiver, so I tried that. I did the door and key dance and got to where when you pull the key out and the door locks lock then unlock. I try pushing the lock and unlock button, then just the lock button as per the instructions and I get nothing. Supposed to get one cycle of the locks if it works and tow cycles if it doesn't. I get neither of those, nothing happens. So I buy a new remote off of eBay (brand new, never used, OEM remote). I try the reprogram door dance again and get the same results. The battery in the new one reads 3v like it should as well. So I go off to a junk yard to replace the receiver door controller, I found one and replaced it and I get the same exact results.
View 8 RepliesHow do I roll down my windows with keyless remote on 2007 Camry LE V6? Honda Accord has the press unlock twice and hold on the 2nd press. Does Camry have anything like that?
View 9 RepliesJust bought a 09 Santa Fe AWD 3.3l .. How to program this key fob/remote start 1 works the other does not do anything . The led light flashes when i push button but does not do anything to rig.
View 3 RepliesMy Santa Fe is only 2 months old, and the Navigation System/CD/Radio froze up on me already. I just had a blue screen with Hyundai written on it. I couldn't turn it on or off, or push any buttons. Nothing worked. I called the Nav System hotline number on the front of the manual, and the guy told me to try reset. I told him I already did. He said he talked to another guy who had this problem, and he just kept pushing the reset, and finally it worked. Well I must have tried a dozen times, and finally it worked. The time it worked I pushed the button while it was off, then again just as it was starting up (always just came back to blue screen before) but this time it worked.
P.S. A pen did not work, I had to use a large paper clip, and you can actually hear a "ting" and the screen goes blank, then tries to start back up (and hopefully does).
But i have a 99 silverado 5.3l z71(new body style) bought a new key fob to program but my truck will not go into program mode. Ive tried the hold unlock then cycle ignition and the turn signal version but neither one worked....
View 10 RepliesI just bought a 2009 toyota camry Le and it came with only one keyless entry key. I bought new one on ebay but can not program it.
View 14 RepliesThe only issue I have with my newly acquired '08 Elantra is that there is no visual signal that the remote lock signal has been received. When I unlock it remotely, I get a single flash of lights, but nothing of the sort happens when I lock it; if I'm close enough, I hear the click of the locks engaging. I find nothing in the owner's manual describing any of it.
Is this normal, or do I have some weird computer anomaly going on?
I have a 96 buick regal custom. I tried to program a keyless fob through the trunk it dint work and now my lock buttons on the inside of my car don't work but yet they automatically lock and unlock when I turn on the car when I go into and out of park gear.
View 3 RepliesI had a flat tire and used the spare. I took my 2007 santa fe in to the shop to get the tire replaced and an oil change. The 'shop' put the spare back where it belongs.
Now my keyless entry locks the doors (audible) but does not flash the lights or honk the horn. The lights flash when unlocking and when pressing the panic button. It all worked correctly when I dropped it off at the 'shop'. What to look for?
We bought our ES350 used a number of years ago. When we changed the battery, the Nav system no longer worked and a " A program cannot be read. Please consult to a dealer." message appeared. Am I wrong to assume that the loss of power from the battery swap caused the software to dump from the system and there was no disc installed to "reboot" the system? All I need is a disc and the system will restore? If so will an "update" disc work or do I need an original "program" disc?
View 1 RepliesWe lost one of the cars remotes, I found online few sellers that sell remote (exact as well as cheaper simpler ones). Is there a way to program it at home without the paid support of the dealer ....
View 3 RepliesI just bought a used 2009 Camry, which has a remote starter installed, but my key will not operate it. From what I understand, the original owner lost the key that was programmed to work with it, and the replacement key does not. I have four keys: one is entirely metal, one is black plastic with no logo, one is black plastic with Toyota logo, and the last one has all the buttons which pop the trunk, and remotely lock and unlock the vehicle. I tried using the key with all the buttons to remotely start the car, but nothing happens.
View 3 RepliesI have a 200 GMC Jimmy SLE and I am trying to program the new FOD key for it. I followed the listed instructions here [URL] .... and here [URL] ..... but it will not enter program mode.
So, is there another method to try to get it into program mode? I have looked here and else but the only other instructions has to do with pre 2000 series blazers.
New owner of a used 2012 corolla. I only have one remote key. After digging through google and ebay. I brought a set of new remote keys with the known warning that I have to take it to the dealer for programming.
What tools to get to have this program by myself. It just cost too much over $150 from dealer just to program a key not counting over $250 dollar for the key itself.
The 2012 SF I bought last weekend has a sticker on the radiator brace near the left head light stating the vehicle has a remote start function and there is a blue button with a key symbol on the fob that (I think) is supposed to make it work, but I have yet to get the remote start to operate. What's the secret? Is there a selection in the ECU that enables/disables it? Do I need to cross my eyes when I push the button? This would be great to have on cold or hot mornings - if I can get it to work.
View 4 RepliesThe 6 button powercode remote start and alarm will shut the engine down if you open the door after remote starting.
Here is the fix, I found it somewhere else. It's nice doing stuff yourself that the dealer tells you it cant be done.
open the drivers door
turn on the ignition
hold the program/override button for 15 sec (horn will chirp 3 times)
press the override button again horn will chirp 4 times
" " horn will chirp 5 times
" " horn will chirp 6 times
" " horn will chirp 7 times
" " horn will chirp 8 times letting you know you are in option bank 5.
press the panic button on the fob horn will chirp once
" " chirp twice
" " chirp three times
" " chirp 4 times
" " chirp 5 times
press the lock button on the fob once...your led alarm light will now be off.
Turn off the ignition
you are done
Enjoy
Activate the remote start open the door(smile) just don't press the brake before you put key in ignition and turn.
I have Lexus Ls460 (2008), I have paint the driver door, so they removed the door handled and reinstall it after they finished, the problem now, the keyless access from the driver door not working, I can't enter unless I push the unlock button in the remote, all other doors working fine, and can be open without pressing the unlock button. So is their any way to re-program the driver keyless door? or it could be something wrong with the handle installation?
View 4 RepliesRecently my 2010 Santa Fe's remote start key fob is not acknowledging a response for any function on it and there is no blue light activating behind rear view mirror. I figure it has to be something fairly simple since it worked just fine last week. I have two remotes and when buttons are pushed I'm getting bright blue lights on both key fobs so I doubt if both batteries are bad, the factory key fob for door locks still works fine. I've read other posts and I'm aware that there is not many fans of the remote start feature. Its been -30 here in MB for far too long and I need this feature to work for me.
View 2 RepliesI had a remote start installed on my santa fe and initially it worked great. Recently it stopped working correctly. The car still starts but my heat/defrost will no longer turn on. I have tried every combination possible but when I get in the car the heat is turned completely off and will only turn on when I put the key in the ignition and manually start the car.
View 1 Replies