Like on most Chevrolet's or other cars, when you unlock your car with the remote, your headlights come on for awhile. I've tried to 'unlock' this feature with a scanner but the only option I was able to change was the auto lock door function. Is there any way to activate this feature (if possible)? If its not possible with a scanner. I have a '09 Santa Fe Limited, w/ Auto Lights w/o DRL.
View 10 Replies08 SANTA FE, NO HI OR LOW BEAMS. Daylight running lites work, fog lites work, checked all fuses, relays, and bulbs,& connectors.
View 9 RepliesThe normal lo-beams won't turn on no matter what I do, but the brights still work. The bulbs are good, the fuses are good. I've tested and changed those. They're good. 2008 Santa Fe ....
View 13 RepliesI've ran into an issue with my high beams on my 07 Camry SE. All lights are working except high beams. When you switch to high beams the lows only stay on. The dash light comes on and shows high beam indicator, but no brights! Fuses look good, and so do both bulbs. Going to go buy a bulb later today just to try. Like I noted they both just suddenly stopped. I'm leaning towards dimmer switch on column now.
View 11 Replies2008 Camry Hybrid. Normal lights are dim. Auto on position results in no lights. A turn brings the lights on, but appears to be a "parking" position. High beams OK
The dealership has no clue - they wanted to sell new bulbs. They are barely bright enough to drive at night, certainly not 10% dimmer from age as they described.. (plus the auto on does not work ).
Didn't find anything on this, but I've noticed that on my GTI the Fog Lights stay on when the High Beams are turned on. Which I find unusual since no other car I've ever owned did this (Including my '12 TDI), and as far as I understood, in the US (At least here in NY), it was actually illegal to have them both on at the same time. ?
View 12 RepliesI just came back from a 3 day trip and went to get into my car with my regular FOB and it won't work. I tried to open the door using the actual key in the front driver side door (the only door with a key hole) and it would turn but not unlock.
What could be wrong? I've had the battery die on me before and I was able to get into the car to boost it, so I don't think its the battery.
Just find it strange that the FOB AND actual key won't open the door (even though the key turns).
Yesterday, I went through my car doing a complete LED conversion. I got everything done. And then I replaced my high beams with Silverstar Ultras. I didn't touch my fog lights or my low beams (these will come next.) And then I went and got some wings with the boys, showing off my new LEDs and my bright high beams. We noticed that my fog lights turn off when my high beams were activated. A cool point I never knew about, but, it is extremely relevant in this story.
This morning I went to work, and noticed that my fog lights were not working. So after work, I came home and tried everything to get them working, check fuse in car, and tried every combination of light to activate them. Then I checked the fuse box under the hood, I hadn't actually ever looked in there before. When I did, I noted that the 10amp fuse, Fog R/R was missing... MISSING. I took the spare from the cover and put it in, and bam, fog lights work again.
Any mod that will allow the fog lights to remain on when the high beams get turned on?
View 40 Replies2007 Hyundai Santa Fe ....
Annoyingly my low beams keep going out. I can replace the bulb and it works for a short while but than again fails. Because of this when driving at night I have just been utilizing my high beams, but since inspection time is coming up I need this resolved. The fuse is intact, and I don't want to waste another set of bulbs if I can avoid it. I am uncertain if it is related, (as it should only affect the tail lights in theory...) but this issue first showed itself a month or so after getting my trailer hitch wiring installed. What would the next suggested check be?
I recently noticed that the high beams on my car are actually pretty dim (38k miles with them.) I've looked online and it seems fairly easy to change out the bulb but I wanted to know if there any specific bulb brand recommended and also I wanted to know how to add fog lights since I live in a part of the country where it snow alot and its foggy in the summer.
View 14 RepliesWhat steps are needed to modify a 2005 RX 330's fog lights to stay on with the high beams? I found the info on the web & did this modification to my 2010 Tundra but can not find any info pertaining to how to mod an RX.
View 2 RepliesAny way to run fogs and high beams same time?
View 9 RepliesI have a 2007 Hyundai Santa Fe. At first just the left head light went out, the next night I tried to turn my headlights on and they didn't come on. The high beams work but the low beams doesn't. I've replaced the bulbs from assuming they went bad. That didn't work, so I checked out the fuses, all of them were good. I don't know what else to check.
View 3 RepliesI've seen a couple posts about low beam lights not working suddenly, but no real fixes to the issue. Looking for an actual fix that worked.
My lights; running, fog, high, and low beam, all worked yesterday. This morning when I try to go to work, all but the low beam lights work. Nothing was done differently, all fuses and relays appear to be intact, and the bulbs appear to be fine.
Vehicle: 1983 chevy c10
Here's the problem, when the high beams are on the dash cluster lights work fine,but when I turn the high beams off the dash cluster lights go off.Im going to buy a new high beam switch but what else might cause this problem?The truck has one of those metal button high beam switches that is mounted on the floor.
Ok today I was driving my 2004 Gli n noticed when I flash my high beams (pull them back for temporary lights) my interior lights come on. When I release the high beams the lights go back off. I know this isn't normal n wanna fix it.
View 8 RepliesFor my 2013 with HID lights, I'm adding a light bar, and trying to find a good wire to tap into so I can wire in a relay to turn the light bar on with my high beams. As it's going to a relay, I originally thought to use a fuse tap, but the high beam fuse is always powered. Any other wire I can use in the cab?
I'm also looking for an in cab wire for the reverse lights I'm adding. I've been trying to make sense of the wiring diagrams online, but I am not having any success.
A good while back I seen a thread to do this , but can't locate it now. I have a 2012 F250 and looking to make my night time driving better ....... I want to run both low and high beams at the same time and getting the fog lamps to stay on when going from low to high beam.
View 14 RepliesI have a '99 Explorer XLT and when I turn the high beams on, the fog/driving lights shut off. Is this normal? Is there a way I can keep the fogs on while the highs are on?
View 1 RepliesMy truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 Replies