My wife's '07 has that fast-blink thing going on with the left turn signal. The thing is, none of the bulbs are out. It does appear that the front ones are dimmer than the ones on the right (which work fine).
View 8 RepliesThe left turn signal blinker on Toyota works sometimes and not others. It is weird, it seems when the weather is cold, it works, warm weather it works sometimes.
The car is: 2002 Toyota 4-Runner, limited....
I need to know the Location of the turn signal relay, my left front bilnker is super dim, and the rear left blinker is normal brightness as well as they blink rapidly. I've replaced both front and back bulbs as well as the flasher and turn signal fuses, so I am assuming the last and final one is the turn signal relay.
View 2 RepliesI know that the relay will make the turn signals flash fast when a bulb is out or there is a broken circuit, but I am not sure about how the brake light switch is causing this condition. I need to go and check all connections and bulbs, but I see nothing obvious at this point. When the brake pedal is NOT depressed, I get the normal interval of the turn signal. As soon as I touch the brake pedal, it begins to cycle very fast. Remove foot from pedal, and it goes back to normal.
View 5 RepliesSo...I'm driving home yesterday and hit my left turn signal when all I get is a fast clicking sound. The light on the dash did not light up at all. Right signal is working fine.
Checked it out in the driveway -- my left signal is totally out. No front, rear or dash light when I hit the left turn signal. When I hit the hazard switch, I get only a right blinking light. The right turn signal functions as normal.
I thought this was probably a bad bulb so I replaced both the front AND the rear bulbs. Got no love - same results.
2008 Prius...
2003 SCrew, 5.4, auto, 4x4.... Yesterday my left turn signal started flashing fast; checked and the front was not flashing. Picked up a new bulb, changed it, didn't fix anything.
I've tried:
-tilt wheel up/down in all settings-no change
-checked the wiring at the top of the column; still good and solid.
-swapped the bulbs left to right and vice versa-no change.
-swapped the sockets left to right and vice versa-no change.
Other info:
-the left front is the only one not flashing with hazards on.
-all original equipment, except I removed the stock side mirrors (w/signal) and installed manual trailer towing mirrors, but that was 2 or 3 years ago.
-the dash indicator light for left turn (arrow) does not come on at all.
-last trailer tow was over a month ago and all was good.
I ran out of daylight last night and at work now so I would like know which Fuse, Flasher, Relay, etc., I should check/replace and where to find them on the truck; under the hood (1st or 2nd stack of the fuse blocks); under the dash above the pedals; steering column???
I've been having an electrical issue for the past few months that I've decided to address now that the weather is getting a little warmer.
What happened is the left turn signal was blinking fast, so I assumed bad bulb, and later that day it stopped blinking fast and now I press the lever down to indicate a left turn and there is a quite loud buzzing sound. Sounds like it's coming from where the relays are, but I've replaced them and the bulbs and still nothing has changed.
I've also replaced the multifunction switch to see if that was an issue, but a new one did the same thing so I returned it.
Running lights work all around, but now there are no left blinkers, and also my left brake light doesn't come on. Pulling a trailer I have the same problem, I had the plug tested and only 3 of the pins have anything to them.
I know nothing about auto electrical systems.
I have a 97 Buick Regal with turn signal issues. The left side will not flash but stays lit and the right side flashes fast. I have the problem isolated to the Daytime Running Light Module. (replaced turn signal stalk, flasher and bulbs). I ran a jumper wire bypassing the module and everything works as it should. Do I need to replace this module, or can I simply bypass it without it messing anything else up. I don't want my horn going off when I change the station on the radio.
View 1 RepliesI just recently replaced my front driver blinker and the replacement worked for about 5 days then it stopped working and the turn arrow started blinking fast again like when it was broken. I had to replace it cause a rock broke it before now I don't know whats wrong.
View 3 RepliesWhen I pull down on the turn signal to signal a left turn, my emergency lights turn on (both left and right blinkers). I tried to figure out whats going on but don't understand what to check/replace. I did notice though that if I don't pull all the way down on the turn signal then the left turn light blinks normally, but as soon as I pull down to activate it to blink on its own, it triggers both blinkers at the same time.
View 11 Replies2007 Santa Fe. Recently my turn signal has not been working. It seems to act finicky and not want to work every time I need it too. I noticed that this happened once every blue moon in the winter time when I purchased the vehicle new back in '07. However it has been occurring more frequently as of the past 3 days.
I have checked the fuse and it is fine. My hazard signals work when my turn signal works if that is any additional indication of what might be going on. What can be done to remedy the situation?
I've changed out all of my external lights for led's, including the turn signals. I had planned on replacing the turn signal relays with led comparable versions but have been unable to find the relays in the fuse boxes. The box that does the actual clicking under the dash seems like it could be it but it looks completely proprietary to this model, and not readily available in the compatible version.
I ended up installing resistors for now but that's caused other problems with my lights. Now when I turn my high beams on all 4 turn signals light up solid and I am unable to use them until I turn the highs off.
So, I would love to know if I do have a relay replacement option for my 2012 Santa Fe...
All my turn and hazard signals work normally when engaged but when it snaps back into the off position the turn signal (sound only) keeps going rapidly. It goes on and off randomly. It's the sound in the dash only. What it is? I can replace it myself I just need to figure out what it is.
View 44 RepliesI'm trying to figure out what has failed on my 2008 Santa Fe.
After stopping at a gas station today, my right turn signal came on and stayed on. By this I mean that the right turn arrow on the dash is illuminated and both the front and rear right turn signal bulbs are illuminated. They are all on steady, not flashing. Moving the turn signal stalk/switch does nothing. They all stay on when the car is turned off and the key removed. I have to disconnect the battery to get them to shut off. I tried pulling the turn signal, hazard and cluster fuses in the dash, but they had no effect. The switch for headlamps/park lights has no effect on the right side bulbs.
The left turn signal works normally.
Also, it may be related to having unplugged the battery a couple of times, but now the CD player shows "initializing" and I can't use it. The am/fm stereo works normally.
I cant find the location of the Turn signal relay, its not in the Relay box under the hood nor is it on the fuse panel under the dash, i'm planning on installing LED blinkers and i want to switch out the relay to a LED compatible one, where it is?
2008 Santa Fe GLS ....
We have a 2015 Sonata 2.4 Sport that has developed an intermittent turn signal problem. When the left turn signal is turned on, the right signal will blink. When the right signal is turned on, nothing blinks. A new symptom that recently started is sometimes neither turn signal will turn on regardless of the position of the turn signal stalk. I managed to get the car to dealer #1 while the LEFT=RIGHT & RIGHT=NOTHING issue was happening but while troubleshooting it, they ran across an inactivated aftermarket alarm system that dealer #2 that sold me the car had installed. I guess the alarm they install is so cheap, it's not even worth removing if they are unsuccessful in upselling you at the time of purchase.
Since dealer #1 would not troubleshoot any further unless the alarm was removed, I retrieved the car and took it back to the original dealer #2 I bought it from. They removed the alarm and the turn signals started working again, however, this lasted about 2 weeks before the symptoms returned. I booked an appointment at the dealer #1 to bring the car in & half way during the drive there, the turn signals started working again. With nothing to show them, I didn't drop off the car. Now the problem is back. Since it tends to come and go, I have try and time when I can drop the car off so it's happening when they get it.
I have a 72 F250. When I put the left turn signal on and apply the brakes, the signal stops blinking. I checked the bulb and it was fine. What is the likely cause?
View 2 RepliesMy 2007 Hyundai Santa Fe right hand turn signal light bulbs flash rapidly both in the front and rear, the left hand side is normal. I am trying to locate the turn signal flasher module but without any luck, looked under the dash in the fuse box and under the hood in the relay box. Is it in the relay box...
View 7 Replies2005 explorer just started having a fast blink on the right turn signal. Left turn and hazards work fine.
View 3 RepliesI went to drive and noticed left turn blinker was hyper blinking. Left front bulb is burned out. Is this a normal feature to hyper blink when a bulb goes out?
View 4 RepliesI also have a problem with my left blinker and my break lights. My right blinker works just fine, but my left blinker and break lights will not come on unless I pull the blinker switch forward a bit- as if I'm going to turn my brights on.
View 14 Replies