Santa FE SM (2001-06) :: Error Code P0455 - Oil Leak In Engine Bay
Dec 4, 2012
I just joined the forum mainly to care of my dads 2001 Hyundai Santa Fe but also I got a check engine light on my way home from work last night.
From last night I saw that oil was all over the timing belt. Today I inspected it with a Coworker and his OBD II reader.
Error Code was P0455, EVAP - Evaporative Emission Control System Leak Detected (gross leak).
Now the oil leak is stronger since the oil spills is on hood (inside hood). I will make a picture tonight when I get home.
I personal think it's leaking from a tube/ valve on top of the timing belt (picture will show more tonight). Thinking of cleaning the timing belt area, then drive a little around or leave it in idle to spot where the leak is from.
Common issue? I googled around but since P0455 is a common issue (on my 9-2x as well) I couldn't find anything about this I am also limited from my search since I am currently at my work PC incl. strong firewall.
I will see if google let me find a picture...
View 3 Replies
Advertisement
Check light came on and I had the code read at AutoZone. There were 3 codes but I'm pretty sure 2 are old (the check light previously came on a couple of months ago and I had it checked, then went off on its own). My car seems to be driving fine.
The new one is P0455. Large EVAP leak. I'm hoping it is just my gas cap.
The other 2 (older) codes are P0456 (small leak) and P0113 (IAT error).
View 8 Replies
So the check engine sign came up on my car and using the OBD it tells me the error is P0113. After googling the information, it looks like I have an issue with IAT sensor.
I opened the air filter and what I believe what could be the sensor and there was nothing clogging up, so I'm assuming the sensor needs to be replaced
Question is where is the IAT sensor located and how do I dis-assemble it so I can replace it. Is it the piece that is located just before the air filter?
View 3 Replies
Engine light come on and everything is running great, this morning got this error code U0d00. Went to advanced auto and had them run a scan.
View 5 Replies
I got an Error Code of U0D00. What this is or means. The scan tool says to refer to your manual but I don't have one.
What the vehicle is doing is that it will work fine for a while then when you stop (in park) the engine will rev really high and back down all by it self for example. It will go up to 3.5 and back to 1 rpm repeated. Then when you start moving the car it will continue to idle higher like you are pressing the gas. During all of this the check engine light will appear?
View 3 Replies
Car has about 75K miles. Son has the car out of town (again), at school. He reported CEL (SES?) light on; "what should I do?" Told him to have it checked. He has trusted mechanic nearby, so I told him to go there. They say they don't just read codes ("You can get Autozone to do that"); they do diagnosis.
Report: Code P0455 (gross evap leak). Did smoke test; nothing. "Did you maybe have it running when you filled gas tank?" (No.) They reset the CEL, and sent him on his way.
Should we be satisfied if CEL stays off? What else to try or to look for if same code comes back?
View 5 Replies
New owner of a 2003 1.8TPassat (29,000mi) as of the last 2 weeks and have just had my MIL come on. Scanned it at home with my Actron CP9125 scanner and got this code (P0455) which reads in the scanners manual as "EVAP Emission Control System Leak (Large)". Didn't know if this was a generic description of the code or VW has a more specific definition. What precisely this is in reference to, gas cap, vacuum hose????? Or what VW's actual description of this code is?
View 3 Replies
I have an 06 sonata 2.4l--last week the CEL came on so I took it to my mechanic and he said it was p0455 which is a large vapor leak in fuel assembly. We tried tightening the gas cap and resetting the code with a scanner but it came back on a day or two later. I have never overfilled my tank and i do not smell gas anywhere. the only real symptom (maybe non related)is my speedometer , it works but it is just a little slow to react when increasing or decreasing speed.---my gas mileage seems to be normal.We got under the car and looked around and couldn't notice any obvious tears in any lines -- should i try buying a new gas cap?--I was thinking it may be speed sensor but my mechanic said if it was the speed sensor , my tranny should be shifting funny , my trans shifts fine. I am at a loss and don't want to have to go to dealer with this.
View 12 Replies
I've checked the lines from the Purge Valve on the Passenger side of the Intake Manifold, Check OK
I've Checked that Valve OK
I've Replaced the Canister Close Valve
I've got the Gas Cap tight.
I've removed the rubber bushing holding the CCV to the Evap Canister, hoping to isolate the Filter and point the blame on it, no luck there!!
I'm thinking next is to drop the Tank and check over all the Goodies on top.... as much as I hate the thought of that, the two access holes under the seats, just don't allow access to enough of the tank!
any thing there that I could suspect, I see there's a check valve!
There's also the Fuel Tank Pressure Sensor, which may be at fault.
View 16 Replies
It seems that i'm most likely going to have to replace the entire plenum .
P1159 here are some details. [URL]..................
I've checked all connecting wires and none appear to be loose. When the issue started to occur and prior to discovering the P1159 code, I also replaced all coils. I replaced the coils because one was arching over to the metal of the engine. I assumed this may be my problem. The issue still persisted obviously. The check engine light never came on so I assumed I wouldn't get a code. I took it over to a friends house with a code reader and that's when I discovered that it was actually giving the P1159 code.
Are there any other model cars that utilize the same engine that I could use the plenum from? Getting this in working condition is going to be the difference in what I can get for it.
View 2 Replies
I own a 98 f-150 5.4 with 70,000 miles. I get a check engine light (code p0455-large leak detected in evaporative emission control system).
Replaced the gas cap with an after market 'stant' ( I believe was the manufacturer) brand. The check engine light went away for 4 days then came on again.
No obvious vacuum line leaks.... Puzzled.
View 14 Replies
I have a 2003 diesel GS Santa Fe, every now and then when driving the ABS light comes on, not very often but it does, if I switch the ignition off and restart it goes out, I had it on a fault finder computer and it showed code c1274, I think its something to do with the G sensor and the way it breaks (ABS) is it an easy fault to fix? What are the costs involved and will it affect the driving of the car, like I say it rarely comes on and I don't notice any change in how it drives.
View 1 Replies
My Hyundai Santa Fe 2006 V6 3.5L shows error code P2100. I cannot for the life of me find the ETS relay. Ive scoured the net but just found vague drawings and pics that didn't show ETS relay. I would also like to know is the ETS relay also known as the fail safe relay or is that a separate relay. Ive seen pics of the fail safe relay but none for the ETS relay. If there is such a relay, exactly where it is located?
View 2 Replies
2006 2.0t 82k on the clock....
Just got back from a round trip to HHI; 11 hrs one way. When I stopped to fill it up on the way back, went to start the car and it would crank but not fire. I let it sit and tried again, same result. I then tried to start while feathering the gas pedal and got it to start. No CEL, seemed to be functioning normally after that.
Monday I'm heading into work, pull up to a stop light about a mile from my house; while stopped, the engine lurches, not violently, but lurches and the CEL comes on. Haven't had time to take it to my shop, no VAG, I'm filling up today, same thing...won't start without feathering the throttle. Took it to O'Reilley's and borrowed their CAN and it pulled the P0455 code. The guy behind the counter "looked it up" and said that I needed a new gas cap due to the EVAP system leak portion of the code.
Next Thursday I'm dropping my car off at the dealer to have the PCV update taken care of on VWOA's dime (Service called me out of the blue and said my car was on the list for the update.) From what little research I've done, some had success with the new PCV, some had success with the cam follower replacement (mine is still original and I haven't checked it yet), and some have had success with replacing the regulator valve/breather kit.
View 2 Replies
I keep getting this code even after fixing hoses with leaks. I am guilty of over filling my gas tank all the time can this have damaged the vapor canister on my 2001 dodge caravan....
View 7 Replies
2004 XC90 T6. Local Volvo dealer (Bangkok at the time) said my check engine light was due to the O2 sensors going bad. I changed out the one under the car, then my wife threw out (accident) the other so I didn't change the one accessible from the hood. The check engine light went away so I figured that was that.
Fast forward a year later, I buy an Autel Maxiscan MS509 and now I'm getting check engine code P0455 which is probably the O2 sensors I didn't replace. Other than deductive reasoning, is there some way to look at the data on my OBD reader to confirm which O2 sensor is bad?
View 4 Replies
Yesterday from the smart center of Rochester, MN I bought a 2013 Smart fortwo Pure with 19k miles. This evening the Check Engine Light came on and it is code P0455.
No other dash lights are on and I have not even touched the gas cap yet. Should I clear the code? Take it to the dealer? Tow it to the dealer?
View 7 Replies
Now, I just bought a 07 Yukon which seems to be in a great condition. The check engine light just popped up so I went to a mechanic and he said the code is p0455.
He did a smoke test and showed me that smoke is coming out of the rear of the vehicle at the gas tank area and the car needs the vent valve solenoid changed, but it's only sold at dealer.
So u went to dealer and got this part and decided to change it myself which was quite easy and fun.
I went back to clear the light, then a week later the light came back on, so I went back to him thinking maybe I didn't do it right, so he did another smoke test and sure enough we see smoke coming out of the rear again, so I looked under the car and saw it was coming out of the end of the vent valve assembly which I think is a small air filter. Is that normal? Or is the part defective?
View 2 Replies
Mystery issue with my 2001 Accent GSI (5-speed manual, 1.6 L). I'm getting a P0300 error code and the Check Engine light (the light is like an old friend, I miss it when it's not on). This happened four months ago and I replaced the ignition coil - seemed to fix things - but now the light and the error is back with a vengeance. Car stumbles and runs rough. Changed the plugs and plug wires, but no difference.
BTW, there's a small pin hole in the upper part of the gas tank (just enough to give it a gassy smell when the tank is full) but I don't think the hole would be big enough at this stage to cause the check engine light to come on in the same way it does if you leave the gas cap off or loose.
View 3 Replies
I have a 2003 Elantra GLS. I am intermittently Check Engine light and error code is P0113 - Air Intake sensor issue. I can't locate where the sensor is. I don't see any wire coming of the tubing that connects the air filter to the engine.
View 18 Replies
Going up my driveway (its kinda steep) after 4 or 5 inches of fresh snow fall- smoke in the engine bay and inside the car. Its a 2003, Santa Fe with the big V6. Driving on level ground it doesn't smoke. I thought it must be the 4WD which I guess only kicks in when needed, driveway hadn't been snow blown yet. Saw a couple dots of red in the snow afterward. Didn't notice it before. But on the way to work tonight (same day) the power steering was not a 100%. The reservoir is down, right on the minimum mark. So now I'm thinking I have a leak and the smoke is from the PS fluid hitting the exhaust. Though why it only smokes in my driveway beats me. It looks as though the exhaust on this engine (big V6) is directly underneath the pump. I think I can verify it tomorrow. Would a PS leak in the vicinity of the pump fall onto the exhaust? Think this is the smoking gun? I can't even see the pump. But the manual says its on the left/rear.
View 3 Replies
