Santa FE SM (2001-06) :: Clunk Noise When Accelerating And Braking?
Jul 10, 2013
I just changed my stabilizer link front right side and it did not solve the single clunk noise that I hear when accelerating and braking.. although it did solve the "multi clunk noises and creaking I get that is now gone away.. but this other single clunk noise what else could it be from it does it when driving straight and there are no clunks when turning. I must add that is that I can hear it and its a low pitched clunk... and is also felt in the steering wheel.
View 2 Replies
Advertisement
My 2007 GX470 is making a clunk/thud noise when braking (more often when braking hard or on a downhill slope) and then again when I let off the brakes and start to accelerate. It is significant enough that I can feel the car jerk some when it happens, almost as if someone has tapped the back with their car. What it could be?
View 2 Replies
I seem to be having a clunk noise coming from my car when braking to a standstill or accelerating from a standstill.
Its totally unpredictable but only happens when braking or accelerating under 10mph.
No noise when going over bumps or turning and its only heard when the windows are down. What it could be?
View 13 Replies
2005 2.3Liter 4wd Mariner, 225k miles
I have been experiencing clunk noise on the front end when braking or accelerating and turning wheels.
I have replaced: front control arms, ball joints, tie rod ends, sway bar bushings and stabilizer links and 2 days ago I replaced strut mounts and bearings.
The steering is smooth after the strut mounts replaced but I can still hear cluck noise mostly on left now when going over bumps, braking and accelerating.
Car also has new engine/trans mounts.
I am so lost right now because I cannot figure out what is it. The only thing I didn't replace are the struts but the I test them and they seem to function fine.
View 5 Replies
Just changed the struts, control arms (both used) and sway bar links (new) in front and when braking or accelerating there is a clunk on the right side. Checked the bolt on the control arm and its tight.
View 1 Replies
So my '99 F350 4x4 is making a clunking sound and there is a distinct jolt in the truck while this is occurring.
Symptoms: From a stop while accelerating, there is a distinct jolt and clunk. The best way I can describe the feeling is like something isn't tightened down all the way so there is a split second while inertia is generated and the "looseness" catches up to the acceleration.
When stopping, the clunk and jolt is generated when the truck comes to a complete stop. When the truck rebounds backwards a bit because of the suspension pulls it backwards after stopping, you will hear the clunk again.
I replaced the ball joints a week ago an a wheel hub bearing on the right side. I don't recall this before these repairs, but it may have been making this noise. I was more focused on the grinding from the wheel bearing so I may not have noticed the clunk and jolt then.
Where I should start looking for the problem?
View 14 Replies
A clunk sound coming from the front end. Drivers side and Passenger side. Not really a metal on metal sound. The problem started after coilover install. The sound occurs while braking and accelerating over bumps. So what I've replaced:
-Strut Mounts and Bearings
-Lower control arm bushings (R32 bushings)
-Drivers Side CV axle
What I've checked:
-Tie rod ends have no play
-Ball joints have no play.
-I have no sway bar, so not the sway bar bushings.
-Its not the axle hitting the frame.
Could possibly be the dog bone mount but when I installed the 1' motor mounts I saw no issue but could possibly be the bushing. feel the clunk in my foot as well.
MK4 2000 Jetta 2.0 5speed With Raceland Ultimo Coilovers (Junk)
View 13 Replies
2001 Hyundai Sante Fe. When braking, I get a noise and the whole vehicle shakes. Exactly as if I were driving in snow and just slammed the brakes. The feeling & noise feels and sounds the exact same as if I were sliding...
I've replaced the master cyl originally just because today is the first day the issue lasted long enough for me to fully hear//feel the whole issue. It's normally brief.
View 3 Replies
I have a 2003 santa fe with a 2.7 and it is 4wd.
It sounds loud during the morning and at idle almost like a diesel loud. It has a horrible timing climbing hills to the point where you can mash the peddle to the floor and almost redline the transmission from 4-5k rpm when redline starts at 6.
It has the CEL on and codes as a p044 and a p0112. I have a OEM oil filter in it and am running synthetic but it still has issues.
When accelerating fast it makes the valve clattering noise and once it catches up to speed like when it reaches the top of the hill it makes the clattering valve noise.
View 1 Replies
2005 3.5L 105K. I had the timing belt replaced at 70K. Ever since then I get a winning noise in the right front when turning left and accelerating. Does not happen turning right. I took it into another dealer and he said it could be in the power steering. But why turning left and not right? He didn't think it was the CV joint.
I changed the PS reservoir in case it was a clogged screen. That did not work. Now I am getting a rattle sound on the right with the car in D or R when the car is first started, moving slow or not moving. The sound goes away in N. I don't know if these sounds are related or not. What could be causing these sounds?
View 8 Replies
My wife has had her 2010 3.5 Santa Fe since new. Over the past year it's been having a clunk develop when accelerating, happening a few times from a start until highway speed. The clunks almost feel as if one is driving over bumps - that's what I thought at first. The power doesn't seem to be there anymore either. I have been driving her vehicle the past three years and it was fine when I first started driving it. But the past couple years I first noticed a problem and it seems it is getting progressively worse. My wife now notices it quite a bit too.
View 1 Replies
I have a 2005 Elantra gt manual that I am having some trouble with. When I first get in the car to drive it after it has sat for any period of time it seems to catch the clutch higher before I start rolling, and once I start moving I get a fairly concerning clunk. I have had this issue for a while, and due to an unrelated issue I have recently swapped out the master and slave cylinder, and the clutch, pressure plate and flywheel all have less then 15k miles on them. After I start driving I do not get a clunk, even if stopped at a light and I have to shift to first and start moving again.
View 1 Replies
I have recently been hearing a clunking noise coming from the front end of my R while braking lightly to moderately at low speed. What this could be?
View 14 Replies
I've been hearing a slight clunk when accelerating from a stop, a very faint split second clunk between in 1st year.
Last week, I pointed the noise to a technician at my dealer and he diagnosed it as the cam adjuster lurching backward as the car moves forward.
He replaced the cam adjuster and the gasket set (058-109-088-E, 058-198-217, and 058-198-025-A). When I got the car back, it seemed like he had fixed the problem. However a week later, the noise is back.
View 2 Replies
I'm new to the VW family as a couple weeks ago I purchased a 2003 VR6 Jetta. So far I LOVE it and it's been by far my favorite car I've driven. About a week ago, I was visiting my parents back home (I'm a college student) and when I went to turn on my car to go back to school I received the alternator workshop message. I didn't want to take the risk so I took my sister's car back to school and my dad took my car into a local mechanic during the week.
Unfortunately, the mechanic we took the car too does not specialize in European cars (They're just a general mechanic/Ford dealership), but we didn't want to take the risk of driving a car with a potentially failing alternator to the closest VW mechanic (About 40 minutes away). The car was repaired and a new alternator added. All was going well, but I began to notice a slight "clunking" noise when first accelerating/lifting my foot off the brakes. I didn't think too much of it and it wasn't very loud nor severe. To me, it sounded like the interior plastic shifting when I moved.
Anyway, here I am a week later and I'm noticing a lot of noises that didn't exist before, including the clunk I just mentioned. I took a few audio recordings. (For the record, there is NO CEL or any dash lights currently on, thus why I'm not as concerned).
The first audio: [URL] ....
In this link, I'm driving the car around the parking lot in which I park my car here at school. It's mostly bumping gravel, but at the time of the recording I was driving very slow. You can hear a squeaking noise.
The second audio: [URL] ....
In this link, I'm revving the car while parked. Something I've noticed that it didn't used to do is rattle while idling ever so slightly (It's not audible in the recording), but in the recording you are able to hear a slight clunking noise.
View 1 Replies
I have a 2004 Santa fe with the 3.5 auto transmission. It has developed a clunk on take off from a start. It will usually clunk two or three times like it is shifting hard, but it is not. I have had a mechanic ride with me (he was not sure what the cause was), a check with a transmission shop said they had never heard of an issue like that with this model, and had it checked for diagnostic codes (there are none).
They are not sure whether it is in the transmission or the AWD, and want to send it to a transmission shop to check it out (feels like exploratory surgery to me).
Hyundai TSBs indicate numerous Power Train issues, including TSB 195729 reprogramming shifting. The clunk will happen two or three times on take off and sometimes when accelerating from about 30 mph. The transmission does not seem to slip. Power is good. Acceleration is good. Shifting to selectronic works well.
Some forums have indicated similar sounds coming from the axels or bushings.
View 7 Replies
When braking or accelerating or when hitting pothole I hear plastic noise (like when someone pack walmart plastic bags) from either driver front door panel (or insulation around door) or pillar between front and back door on driver side only. I hear same kind noise but much lower noise when pulling up window (only when it reaches top, not all the way...). It is only driver side and not passenger side. Other than that car is so quite (specially with my Defender tires), that any kind of noise is driving me crazy...
View 1 Replies
My 2002 2.4lt Santa Fe started shuddering under braking just after I brought it, so I got the front disc's skimmed, fixed it but 6 months later it come back, so on went a new OEM set, fixed it but 6 months later it's back again...
I'm about to skim this new set and see what happens.
Part number 81230-26000 and 81230A from partmaster
View 1 Replies
I purchased a new Pilot in June. With every acceleration or braking I heard significant creaking. After two visits to the dealer I was told it was an issue with the a-frame. I continue to have all kinda of noises, increasing with colder temps. Every bump, rough road, etc, brings creaks, pops, rattling in the dashboard/windshield area, window seals, rear-end area. What could have caused the issue initially? Two people in the industry think it was damaged in transit. The first service was around 2,500 miles. It just turned 9,000 with 4-5 service visits.
View 5 Replies
We have a 2005 honda civic hybrid; there is a squealing noise coming from front passenger side, when braking, when accelerating, decelerating, but not while driving at speeds of 30 mph, straight. Also when backing up, turning wheels. It's going to the mechanic on monday for regular maintenance, 100K miles, etc.
View 3 Replies
I have a 2005 Auto Santa Fe and every now and again the ABS light keeps coming on and also the ABS kicks in during normal braking.
The car was serviced and all brakes changed last Aug. What may be causing the problem.
View 3 Replies
