Santa FE SM (2001-06) :: Blower Relay Keeps Going Out
Feb 26, 2015
I replaced the blower relay around this time last year. I noticed this morning idling that the vents weren't blowing then when i was moving i heard it tick back on and would blow normally. This happens when driving too but more noticeable when idling. The AC light also flickers and goes on/off.
I can go ahead and replace it again but this seems to have gone through this brand new relay pretty fast. What I can fix to stop going through relays?
View 8 Replies
Advertisement
I replaced blower switch last year a couple of years ago. I recently starting to get clicking noise from blower relay, and fan turns off then comes back on.
Question:
1- Problem more likely to be from the relay or the fan switch? Should I just replace the relay?
2- I can see and touch the fan relay, but how do I get to it to replace it? What dis-assembly is required?
View 1 Replies
My Hyundai Santa Fe 2006 V6 3.5L shows error code P2100. I cannot for the life of me find the ETS relay. Ive scoured the net but just found vague drawings and pics that didn't show ETS relay. I would also like to know is the ETS relay also known as the fail safe relay or is that a separate relay. Ive seen pics of the fail safe relay but none for the ETS relay. If there is such a relay, exactly where it is located?
View 2 Replies
I have strange issue with my a/c fan, its running continues even will the a/c switch is off.
I cant stop it. So I have to remove the fuse to stop it. My ac panel is automatic.
View 2 Replies
Today i had my ac running and switched the speed from 3 down to 1, then poof totally went off and will not come back on at all. I tried replacing the resistor, still nothing. Next tried the blower motor, still nothing. Then replaced all the fuses, still nothing. The compressor is kicking on. Can here the click under the passengers side when turning ac on, but the blower motor is not coming on.
View 1 Replies
How to remove center panel in order to replace faulty blower switch?
View 1 Replies
2005 Santa Fe - 3.5L w/ Auto a/c controls (it matters for price on the resistor. boo!)
I find myself having a really hard time sliding the motor back in. It was difficult to pull out before and now it's nearly impossible to put back in.
The Fan wheel measures 5 3/4"
I believe the issue has to do with prefab installation and a very large wheel causing this to be too difficult to push in at an angle.
I see different dimensions for fan wheels and I'm thinking that may be the key.
I already have to replace the blower motor.
View 3 Replies
I have an 02 Santa Fe and last night while driving the fan would not turn off. It also started switching speed by itself.
View 2 Replies
How hard is it to change the A/C/Heater blower motor. I know about the switch problems but this is the blower motor. I'll probably clean it out and spray something in it before I replace it but I just wondered how hard it is to get to. On another note, this 4 wheel drive Santa Fe rocks in the snow! I can't believe what good traction it has!
View 3 Replies
Blower only works on high speed. From what I have read the problem is either the switch or the motor resistor. I am leaning toward the resistor which is behind the glove box. Where can I find directions for removing the Glove box?
View 1 Replies
I have a 2005 Hyundai Santa Fe 3.5 litre 4wd and am having a crazy problem. It has the automatic heating and air conditioning module (digital). The heater fan comes on as soon as i start the engine and runs in the 2nd highest speed. I can adjust it so it goes one speed higher but never lower than the one it comes on at and cannot shut it off. It operates the same under heat OR A/C modes. The temperatures adjust o.k. but it is always on. Where would i find the a/c control module? Could it be the transistor or resistor and where are they located?
View 2 Replies
I have an 04 Hyundai Santa Fe 3.5L V6 AWD with climate control. All other trucks this year I've only seen with manual HVAC controls. My blower motor is constantly running anytime the key is turned on. It feels like it is blowing 3/4 strong all the time and I can turn it up, what feels like one setting higher. Even if the climate control is turned off it keeps blowing. I can control the temp and AC and defroster, I just cannot control the actual airflow pressure from the vents. On an older car this seems like a resistor issue. Is this a common issue? If so, what can I do to try to rectify this?
View 4 Replies
I have a 2007 Hyundai Sonata 3.3 Limited with auto air. The fan blower doesn't operate. Cannot find the relay.
View 10 Replies
I have a 2006 Azera Limited. Where the blower motor relay is located.
View 2 Replies
I'm having some trouble with the front blower fan on my 97 Aerostar 3.0, it will only intermittently work, one time we had it running, lifted up the hood on the van, checked the connection to the motor, looked good, dropped the hood and the fan immediately started working again, I'm wonder if the relay might be starting to go bad, the fan in the back works, so I'm not sure. Where the relay is for the blower motor, or what might be wrong?
View 6 Replies
1989 E150 Club Wagon, 5.0, EFI, Autotrans, 61kmiles.
Blower motor acting up.....sometimes on, sometimes off......mostly off now. For a while there whenever I would accelerate heavily, the Blower Motor would cut off, and when I leveled out in speed, it would come back on. I'm thinking maybe the thermal cutout in the Blower Motor Resistor Assembly..... but I also want to check the Blower Motor Relay, which I find on the schematic but have no clue where it is on the Van........ Also, it must go by another name because I can't find it listed in any of the parts stores.
View 8 Replies
I have a 1999 Chevy Suburban. The blower fan for the heater/AC was only working on high so I replaced the resistor and relay at the same time. Still no change so I replaced the switch and 30 amp fuse. The first three settings worked but not the high. I checked continuity of the wires between the switch and relay and they were fine. I then thought it might be the blower fan which I replaced but still not working on high.
View 4 Replies
Locating subject relay on my F-150 XLT Extended Cab, 4.6Ltruck. All my research thus far indicates it is somewhere on the truck. An electrical diagram I've come up with shows it in the "Blower/Flasher Relay Block". So my question is exactly where is the Blower/Flasher Relay Block?
View 4 Replies
Looking for info from Bentley manual which relay is for the blower motor, washer fluid pump and 12v outlets? They all went out on my brother's Passat. I'm thinking it must be the relay as we have tested each fuse and they all test fine.
View 1 Replies
Recently got a 2003 f 250 6.0 that has had a little work done on it. Absolutely love it with 1 exception. When I turn on the ac or heat It blows a 10 amp fuse that goes to the blower relay. It was occasionally now it's all the time.Blower ok, fan speed resistor ok. What or where to look.
View 8 Replies
I've changed out all of my external lights for led's, including the turn signals. I had planned on replacing the turn signal relays with led comparable versions but have been unable to find the relays in the fuse boxes. The box that does the actual clicking under the dash seems like it could be it but it looks completely proprietary to this model, and not readily available in the compatible version.
I ended up installing resistors for now but that's caused other problems with my lights. Now when I turn my high beams on all 4 turn signals light up solid and I am unable to use them until I turn the highs off.
So, I would love to know if I do have a relay replacement option for my 2012 Santa Fe...
View 1 Replies
