Santa FE SM (2001-06) :: After Driving It Won't Shut Off - Replace The Ignition Cylinder Or Switch?
Oct 20, 2014
I've been having a "turn off" problem with my 03 santa fe. After driving it doesn't want to shut off. The switch will be in the off position and it just keeps running. When I put it in Reverse or drive and then turn the switch off it stops. But which should I look at first? The ignition cylinder/key replacement or maybe something in the ignition switch/electrical? The cylinder assembly is over a hundred $$ and the switch is only $25.
View 3 Replies
Advertisement
2003 Santa afe 2.7 litre: So for some reason the key ignition cylinder light no longer works, but no issues with the ignition at all. What powers the light, is there a specific part of the cylinder I need to check or replace or do I have to replace the whole cylinder. Would a another cylinder I pick up from the junk yard work?
View 11 Replies
A few days ago my ignition key would not budge when I tried to start my 2003 Santa Fe. I tried all the tricks like turning the wheel. dry lube, etc but no luck. All indications are that I need a new ignition lock cylinder but I can't figure out how to remove it. I removed all of the plastic and metal shrouding below the dash but can't seem to find a hole to release the cylinder. I have also tried to remove the whole cylinder body assembly by disconnecting the wires and loosening the bolt that secures the "arm" from the ignition cylinder body to the steering column but that also seems to be secured in a way I can't figure out.
View 3 Replies
Son has a 2004 Hyundai Santa Fe 2.7 motor. The timing belt broke before we could replace it. Long story short, 24 valves, gaskets, timing belt, water pump, new belt tensioner and new pulleys. The motor is back together. The only problem is when you turn the ignition switch on, it blows the CPU fuse. The only electrical part we replaced was the purge valve.
View 3 Replies
Is there any way to replace the keyed ignition with a simple momentary switch of some sort? Or is the built in security features too intertangled in the whole design? IE I suspect I'd have to disable tronsponder, keyed ignition, security system, steering column lock, some computer features? I definitely no expert but wondering if it's possible.
View 1 Replies
Replacing the ignition switch? I heard it possibly needs some VAG COM changes related to the immobilizer?
View 3 Replies
Had been having problems with ignition on my 1995 Jeep Cherokee Sport. Key was loose and eventually wouldn't stay in "on" position without being jerry-rigged (don't ask). Replaced the Ignition Control Switch and the Key cylinder today and car won't start. Checked fuses and they look fine.
Used this video as a guide and it installed perfectly. [URL] ......
View 4 Replies
I have a 97 grand prix GTP that I am replacing the ignition switch on. I am having trouble locating the small hole on the key cylinder that I put an allen wrench into to release the key cylinder.
View 2 Replies
I have a peculiar problem with my 2010 Santa-Fe 3.5L
Every now and again, and more often recently, when I try to start the car with the ignition switch, it cranks well, but doesn't, or takes a while to start. If, after trying to start it with no success, I give it a few seconds, I usually get it going, but not always instantly like it used to.
However, If I try to start it with the remote, it starts instantly, every time. What could be the cause?
View 11 Replies
Just got this car it's 2001 gti turbo. The guy said that the key fob was back. But I changed the starter and still no luck. It had all new plugs and I went to check for spark and there was no spark or fuel. So then I got a new crankshaft sensor and still no luck. I haven't gotten the chance to check for spark yet. And now those lights and beeping keep happening even without the key In the ignition. Can it be the ignition switch or something worse?
View 1 Replies
I just had the ignition switch replaced on my 2001 Toyota Sequioa. Now my blinkers work but will not shut off after I complete the turn. Additionally, the blinker "stick" is very hard to move in either direction. I plan to take my car back to the dealer and politely request this blinker repair be warranty work.
View 1 Replies
My wife's 2001 Gran Prix has a problem with the ignition switch, or related to the ignition switch. Intermittently (more frequently in warm weather or when the car's warm) the ignition switch can't be turned back to the 'off' position all the way, meaning the key can't be removed from the switch. We've heard from several mechanics that there are a couple problems that can cause this, and in fact had the ignition switch replaced which did not solve the problem. I understand there is a connection to the transmission or gear shift lever that may also be part of this problem in some way. There can only be so many solenoids, switches, connections, etc, related to this, I'd like to fix the problem and avoid spending money unnecessarily.
View 2 Replies
Have a 2001 Prius going strong except for the ac. The button light blinks on the ac switch, and the compressor seems to shut off. But some times the ac works fine.
I brought it into the dealer and they said I need a new compressor.I think it's a temp sensor, otherwise, why is the ac nice and cold and can stay on for some period before going off.
View 13 Replies
I need to replace the serpentine belt on my wife's 2001 Santa Fe 2.7 V6 but I can not seem to figure out how to get the tensioner off.
View 1 Replies
The light for the odometer in my 05 Santa Fe has gone out. Every other light and the dimmer switch work fine as do the taillights. What do I have to do to replace the bulb?
View 19 Replies
I have a wobbly crank pulley and I am wondering how ofter the harmonic balancer should be replaced? I have about 125000miles on my 2004 Santa Fe 2.7 V6 and I have heard this is an issue around 100000. Also wondering how much it would cost to replace?
View 10 Replies
My girlfriend has a 2005 Accent and recently we went to go drive it and the battery was dead. I noticed that when we shut the car off the black LCD Odometer display was staying on the dash with the power shut off and no key in the ignition. I figured out which Fuse it was under the hood and pulled it. The odometer lcd turned off and we also lost all of the interior lights.. When I ran the car with the fuse pulled the Odometer LCD would display normally but somehow the battery is still managing to drain even with the Fuse pulled.. Any wiring diagrams for the fuse panel under the hood or if it could be a relay that is still drawing power when the car is shut off..
View 3 Replies
The previous owner broke the key off in the ignition so I replace the ignition lock cylinder the problem is though even with the old one I can't turn the key to lock so it's stuck on acc. What I can try without replacing the entire column? Also it needs a catalytic converter, do I have to weld a universal one on ?
View 1 Replies
I have a 2001 f350 this morning I went to start the truck the key turn but I heard a click sound all the lights and everything came on but the truck won't start just silence I could turn the key back in the off position and put the key out but the truck is still on radios on it's like the truck is still in the run position or on position there is a lot of play between off and run but like I said the truck will not start, could be not sure if it's the ignition switch or actuator rod..
View 2 Replies
My emergency fuel shut off switch triggers when my truck sits. Never on the road. Why would it do this?
View 3 Replies
A week ago, my wife and I were driving on the highway when suddenly our 2014 Santa Fe decided to shut off at 65 mph. When I say shut off, I mean EVERY SINGLE THING IN THE CAR DIED. All of the interior lights off, headlights off, instrument cluster, EVERYTHING. Being cool, calm, and collected, I immediately shifted into neutral, cranked, and all was back to normal. Not in the 2 years that we have owned this car has that EVER happened! I chalked it up to an inexplicable electrical anomaly.
Tonight, again, the same thing happened under different circumstances. This time, I was following her. She came to a stop at a red light, then once she lifted her foot off the brake, everything shut off. I instructed her to immediately put the car in neutral and try starting it. Like last time, it turned right back on. Apparently, there seemed to be an issue with the previous generation with the 2.4 motors.
View 36 Replies
