Santa FE SM (2001-06) :: 2004 - Slow Acceleration Which Is Worse After A Stop Sign Or Red Light
May 14, 2012
I have a Hyundai Santa fe 2004 6cyl 2.7 L , AWD. I am having problem of slow acceleration which is worse after a stop sign or red light. Sometimes while taking turns I feels like that I will not move and I was lucky to be not hit by a Car coming from opposite direction while taking a left turn today.
The Truck’s exhaust pipe broke recently and a auto garage welded it. But I am facing the above problem immediately after the repair of exhaust pipe. If I put more pressure on gas pedal then a mal function indicator comes and today I took it to another mechanic and he gets the error code of P0303 –engine misfire and wants to charge me ~ $600 $ to replace spark plugs and wires. The malfunction indicator goes off also while I am driving and can comes back after a while or a day. With the indicator on, the car drives erratic (minor jolts ) for few meters and then its fine. Since when I am driving on highways then I can go higher speeds without any problem. Is it still misfire issue???
View 11 Replies
Advertisement
Ok here's the situation. 2004 Santa Fe 2.7 AWD 170,000 miles.
I recently had to replace the front passenger side Drive axle. That was a piece of cake. However, since then the car has developed a shudder when it comes to stop (felt like the shudder on acceleration that was fixed by the dealer with a reflash). Suddenly it got so bad that it stalls when put into gear with the brake on. It feels like it is not coming out of converter lockup.
When I drained the fluid I replaced it with Valvoline Import multi-vehicle full synthetic (it says it is spiII). I latter added another half quart of Castrol transmax import multi-vehicle (also spIII). Did I screw up my trans? Will a flush work? Or do I just need to replace the trans and torque converter?
View 4 Replies
I have a 04 lariat f150. Problem is every time I stop at a light or stop sign I hear and feel a bump. Coming from the rear I guess . Had my truck aligned asked the alignment person about the situation he said ford just do that. True or false ...
View 2 Replies
I have really taken care of this 2011 SF Limited with the 3.5 V6 but it has always seemed to idle rough at a red light/stop sign while in drive. Is this common for all the 3.5 V6 engines? I run a fuel cleaner through it before every syn oil change and also use top tier gas. It drives nice but like I said, at a stop in drive it seems to run rough at around 500-550 rpm's.
View 10 Replies
My AC is working intermittently, best under acceleration, horrible in stop & go traffic. The dealership told me I need a new compressor clutch but the written estimate was to replace the whole compressor assembly. Replacing just the clutch isn't too bad, is it? I'm pretty handy and do a lot of my own work but I typically avoid the AC system. Replacing just the clutch doesn't involve draining the coolant or anything, right?
View 1 Replies
When @ a light or stop sign the car vibrates excessively to the point it makes my daughter sick. I do feel it vibrating but it doesn't bother me but something is definitely wrong. There are no engine lights on, I can hear the top end tapping and clattering, I did check the valve clearances which seem to be barely within specs. She says it vibrates worse when the tank is full. She also said when the tank is full the front end shakes driving down the road. I'm kinda wondering the front end shaking with a full tank might be the rear struts.
View 4 Replies
Here's the run down:
-bought 6 months ago for cheap because it wouldn't pass smog test
-changed Purge Control Valve (PCV) and it passed
-filled with gas, heard popping noises like a backfire, and coded it read the same "Bank 1 and Bank 2 running lean, like it did before the PCV and then also "Cylinder 3 Misfire" appeared.
-At this point the car started running rough, at idle, and through acceleration...sputtering uphill, and when climbing through the gears.
-Changed the plugs & wires
-NOW, it's cylinder 5 misfiring, and not nearly as bad. It's idling and running rough, acceleration has somewhat come back, but it's definitely not 100%.
Should I start with the PCV again, since it's not starting after I fill the tank, and climbing gears slow? Is there anything else I should be checking?
View 2 Replies
After a full complete stop or slow down to almost complete stop upon acceleration from that stop or slow down my dash brake light blinks and yells at me for the standard amount of time then goes away. It only does it upon acceleration its weird its almost instantaneous with me pressing the gas pedal. No squealing noise or anything else is coming from the rotors and everything feels normal its just starting to get annoying as hell.
About 6 months ago I replaced my pads and rotors with the drilled and slotted kit performance-cafe offers and had it professionally installed because, I'm lazy and it would have take me years to do it. This problem only started recently so I'm pretty sure its something else or something went bad. What I should check or have specifically looked at if I take it in?
View 7 Replies
I have a 2004 4 cyl. Santa Fe. The stop/tail light burnt out. Replaced it but still not working. Checked to see bulb was in correctly. Checked wires and bulb holder. Still not working. Back up and turn are working. Could it be a fuse?
View 3 Replies
I got a 2002 sierra 1500 with a 5.3l. I just replaced both catalytic converters and y pipe. After I did this, I am having a few problems. First, when slow down to park or at a stop sign the idle drops way down and it dies. I cleaned the throttle body, maf sensor, and ran a can of seafoam and a can of b12 chemtool through it. It did this for a couple of days and now when the idle slows down the "check oil pressure" light comes on before it dies. Then yesterday the "check oil level" light started coming on. Is this all related, would the low idle cause low oil pressure, where to start?
View 1 Replies
The prius stock battery is weak compared to my wifes Mercury Mariner battery. The Mariner acceleration on battery alone is excellent - she can get up to 30 mph in no time on just the battery. In my prius it has very slow acceleration at a dead stop while running only on battery. Is it possible to buy aftermarket (stronger) batteries for the prius so I can at least driver the car up to 30 mph only on battery?
View 4 Replies
I have a 2002 F350 with the 7.3 diesel. I have had this truck since it had 30K miles on it and it now had 90K miles. It has been trouble free minus new pads and batteries. I recently changed the fuel filter and used a Donaldson filter. In the last week while driving the truck just mysteriously shuts off when I slow down for a stop sign. The only lights on the dash is the red battery light, and it fires right back up. I believe it has the original CPS in it as I have never changed it. Do you think this is the CPS going out or something else? I was wondering if the Donaldson fuel filter has anything to do with it?
View 5 Replies
I have a 99 7.3 F250. It dies when I slow down for a turn or for a stop sign. At highway speed, it 'surges' sometimes, and makes he whole truck jump. Also, there is a small leak in the tube connected to the turbo. Has 250k miles ......
View 1 Replies
Girlfriend just bought a used Elantra. She told me about an issue shes been having with the car and how it feels as though its towing a trailer. I drove it for a day and noticed a few things. Vehicle has 110,000 miles
1. No CEL
2. Tranny seems to NOT be slipping (Revs climb just as slow as Speed)
3. Car feels VERY heavy at times. Especially on a start up-hill
4. No sputtering/misfires
5. Shifts up and down smooth
What I've tried so far:
1. Replaced Spark Plugs
2. Sea-Foam
3. Cleaned MAF/Checked Airfilter
4. Removed and Inspected BOTH Catalytic Converters and both seem to be intact. *plan on doing a back-pressure test as soon as I get the gauge from my buddy*
5. Checked timing marks
I put 1/4 can of seafoam in crank case and plan on letting it "run-in" for 25 miles or so. I plan on doing an oil change tonight as well as make sure the brakes are not hanging up (I should have checked this first, thinking back...but hind-sight is always 20/20 ) .
View 11 Replies
Just bought a 2001 santa fe, 2.7 v-6, automatic trans, 2 wheel drive, new tires, 120,000mi. Got a great deal, don't want to negate that by nickle and dimming. 3 weeks ago noticed a howling from drivers front at speed, pitch changes with wheel speed not rpm so i figured wheel bearing. Took both front tires off with vehicle firmly supported and put vehicle in drive and increased rpm. The noise is not at hub but at other end where the shaft attaches to transaxle. I figured there would be an "axle bearing" or some such i could replace but I can find no reference of one, and my book doesn't have break down of the transaxle. Where can i find more information, schematics, etc? I hope I don't have to remove transaxle to have one pressed in.
View 2 Replies
We have a 2012 Santa Fe Limited V6 AWD. Currently it has 17,400 miles on it. It's my wife's daily driver and has been a great vehicle. Last week while she was coming out of Target and slowing down for a stop sign she felt a "shudder" as it downshifted from 2nd to 1st. Then as she was coming up to a stop light it did it again. So, she came home and told me about it.
On the highway coming home she said it was perfectly fine but stopping at the stop sign on the off ramp it did the shudder. And so I took it out for a test drive to go get the mail. I noticed that it would shudder on the 3-2 and 2-1 downshifts. On the up-shifts it was perfectly fine. Then, I noticed as I was rolling forward at about 1-2 mph waiting for someone to cross the street the car was rolling like one of it's wheels or axles was bent. Any faster than that and you can't feel it and again at highway speeds you can't feel it at all. It's glass smooth.
Soooo, we bring it in to the dealer and they say we bent the front drivers side axle shaft. WHAT!? How in the world would we have bent that? They said we probably hit a big pot hole but it's under warranty and that they will have to order the part and to bring it back the next week. We drive it for another week and the shudder is getting worse and at this point I'm pretty sure the trans is toast. But still, on the highway it's perfectly fine.
We bring it back in to have the axle shaft replaced and they say it will be about 2 hours. And so we go on our merry way trying to kill some time. About 1.5 hours later we get a call asking us to come back in because they need to get us a loaner.
Apparently as the tech was trying to spin the drive-shaft to line up the splines in the trans with the axle shaft he couldn't turn the drive shaft even though it was in neutral. There was a spot in the rotation of the transmission and drive-shaft where it would spin freely like it should and then it would hit that spot and was almost "un-turnable". They think that is what bent the axle shaft.
So, they are going to tear apart the transmission and transfer case to find out what the problem is but most likely going to have to end up replacing one of them anyway.
View 4 Replies
On light acceleration, it has a light stumble or surge and is very slow. On hard acceleration it makes a lot of noise, but isn't even fast enough. I can feel it shift through the gears, and can feel the converter lock up when it's supposed to. Any attempt to climb a slight hill or pass a car, it downshifts to what seems like 2 gears down, and has a loud roaring noise, but I don't feel the acceleration. At steady speed, it feels like it's hunting for a steady RPM, but can't find it.
I just had a timing belt replaced. Had the mech double check to make sure marks are correct. He did a cranking compression test and said they were all between 165-170 psi (is that a little high for a 150K mile car?). He smoke tested the intake system and found no leaks.
It does have codes stored for cat converter and a lean code-bank 1.
View 5 Replies
I will try to film the sound and post it later; but for now I have a 3.5L V6 AWD with 85k on it. i get grunting and groaning on colder mornings and sometimes a med pitched whine, more noticeable at higher speeds in town.
View 9 Replies
I don't drive (aren't you lucky?) but my wife and I own a '95 Ford Windstar and last summer we had issues with coolant leaking and had to have a few head gaskets replaced. Now, when we're idling at a stop light or sign, the oil light goes on but as soon as we accelerate, it goes off. The manual says the light indicated either low fluids (which isn't the case) or that the pressure within the system is low. The vehicle seems to run fine otherwise but I'm wondering if the oil light gauge has been set too sensitive?
View 7 Replies
My 2012 Camry 2.4L is sometimes dangerously slow when accelerating from a stop. Totally intermittent. I can put my foot in the gas pedal and the car takes its sweet time getting up to speed. Almost like trying to start in 2nd gear in a standard transmission vehicle. I've had the torque converter software patch.
To be honest with you, this is a huge safety issue. Not sure I can trust my car to accelerate. My car has 44k miles and I've done all the scheduled maintenance and run only top tier fuel.
View 14 Replies
2004 Santa Fe 2.7L V6 2WD ... Car was running fine, filled it with gas, and upon starting, heard a backfire into the intake manifold. It coded for a Cylinder 3 misfire so I had plugs and wires changed.
Now...The car starts, idles rough, accelerates sluggishly, and running rough any time it was around 2000 RPM. After I changed the plugs, it started bucking a little and stalls when I take off in the morning.
Coded and it's reading 7 codes, but some are duplicates:
-P0274 Cylinder 5 Injector Control High
-P0305 Cylinder 5 Misfire
-P0102 MAF or VAF A Circuit Low Input
-P0050 H02S Bank 2 Sen 1 Heater Circuit
-P0030 HO2S Bank 1 Sen 1 Heater Circuit
-P0274 Cylinder 5 Injector Control High (Shows Twice)
-P0102 MAF or VAF A Circuit Low Input (Shows Twice)
After having a backfire and then cylinder misfire...replacing the plugs and wires.
View 2 Replies
