Santa FE SM (2001-06) :: 2003 Car Lurches When At A Complete Stop With Brake Fully Applied
Mar 28, 2012
Just got a 03 Used Santa Fe 2 weeks ago... 79,000 miles
1. Car "lurches" when at a complete stop w brake fully applied out of no where, so strong that I could easily rear end someone...
2. told dealership car was pulling to right, they said (after some teeth pulling) that a ball joint was replaced and Santa Fe's don't need alignments but in MA this is part of state inspection and considered a safety issue, needless to say, they say I have to pay for it...
3. Rear brakes seem to be hanging up...
All I want is the issues fix.
View 2 Replies
Advertisement
Recently I noticed that three LEDs in my 05 SantaFe's high mount stop light glow even without the brake applied. When the brake pedal is depressed, the entire light glows as it should. But only the three LEDs glow at all times.
View 13 Replies
My car has 140K miles and has never required any brake work.
It is difficult to describe, at freeway speeds they seem to work fine. Around town, say 45 mph and below, the brakes work as though I'm a 16 year old learning to drive for the first time. I'll press a little, and get nothing, press a little harder and they really grab and the car lurches. But it also seems inconsistent, it doesn't always happen.
This has had NO perceptible impact on the "grabby" braking performance. Further, I would describe the hydraulic only braking as "excellent", they work just fine and I do not get any of the pulsing or weird brake behavior when braking with the car in neutral.
View 3 Replies
I've been noticing an odd noise in the brake pedal in our '03 Santa Fe. I don't hear it all the time (almost never on the highway), but especially hear it in stop-and-go traffic. It's sort of a whirr, a "RRrrr". I've googled and watched YT videos and it's definitely not a hissing sound or a grinding sound, nor do I notice any difference in the brakes' responsiveness.
I'm apprehensive of taking it to the dealer for service because I only plan to have this vehicle for at most three more weeks. Have only held onto it this long because we couldn't afford to replace it until we sold our house-- which we've just done, and are about to move to a city about an hour away on 7/5. We'll trade in the car within a couple of weeks of moving.
The noise is definitely from the pedal and isn't anything like squeaking brake pads (I currently live in the DC metro area, so squeaky brakes become very familiar with all the stop-start traffic!). The videos I've found that point to a booster problem have a decided hiss, and it's not that either. Don't want to be unsafe in the time we've got left, but also don't want to throw another thousand bucks (every time something breaks in that darn thing, it always seems like it's about $800) into a car we won't have in a month's time.
View 6 Replies
I've had my 2011 Prius II for two months, and I love it. One little thing bugs me, however. I have noticed that sometimes when I apply the brakes, the car lurches forward a little bit. But I keep the brake pedal on, and the car does stop. Is there something wrong with my brakes, or is this something that has to do with the regenerative braking?
View 19 Replies
I have a 2012 Prius with 15000 miles on it. In the year I have had it, I have had this problem a few times. On rare occasions while I am braking the car seems to lurch forward. In particular I have noticed it while braking and hitting a bump. The problem is that when this happens the car seems to jump forward while the brakes are being applied. My foot is on the brake when it happens, but I am not braking suddenly. That rules out any anti-lock braking. I have had the dealer look at it but since it didn't happen on their test drive they couldn't figure anything out. They did open a case on it in case anything comes up.
View 9 Replies
I have noticed that my car do a noise when I brake and it come to a halt. It's hard to describe, but it's sound like "put". A little bit like a shock noise, but my shock doesn't make any noise when I go over bump. I had a loaner car while my car was in for rattles, and there was no noise like that. What it could be? It's not very loud, but still I notice it.
View 6 Replies
I have been hearing a sound on and off now for months that happens right before the car comes to complete stop and sounds like the ABS 'chatter' sound like you hear if they come on in snowy roads. Problem is roads are dry. Literally last 1 second. Will happen when stopping hard or slowly. Maybe once or twice a week. I can't reproduce it happen no matter how hard I try. Brakes are in good shape as are tires and it isn't like I am locking them up or anything. No ABS light or traction control light showing. No codes thrown either.
View 5 Replies
It's been two weeks since the track and the brake still squeals during the last couple feet before the a complete stop (from 10MPH or so to 0), is this normal? I am on stock pads, how long they last typically? I have 32k miles on the car and that was the first time I track the car ever.
View 2 Replies
My girl just purchased a 2012 GTI and noticed her brake assist is not active when at a complete stop. I have a 2011 GTI and my brake assist is active when releasing the brake and starting off in first gear. How I can activate this for her as she is still new at driving manual?
View 4 Replies
After replacing several front end suspension parts I noticed an issue with the brakes. The car stops fine and in a straight line but right before the car comes to a complete stop the brake pedal drops about 1/2inch and if I am not holding the wheel, I see it move to the right ever so slightly. It does it every time and I am thinking that a component was either damaged or is not installed correctly.
View 8 Replies
I noticed that the car take a very long time to come to a complete stop and I have to press the pedal hard to stop. The brakes have approximately 11,000 miles on them in city driving conditions. Also the slightest bit I relax my foot, the car begins to creek and move. I have to have a very firm foot on it so it won't move. Is it time for new brakes or should I first begin to look at other potential problems? Also I noticed the car pulls to right slightly could that be related?
View 14 Replies
I just recently got 2008 gx470 as a college graduation present in May. Very exciting having a GX as my first "real" car!!
After driving a few months, I have noticed that my brakes are acting a little funny. Whenever I brake, the car seems to "skip" until I come to a complete stop. It's not a very serious problem, but more of an annoyance.
I took it to the dealership and they told me that my rotors are "warped" and need to be shaved down. They quoted me for 600-700 dollars for the fix...
I just hit 43k miles
View 9 Replies
Bought the car used a few months ago with a little less than 72k miles. At 72k miles, I replaced all brake pads. Car now has 75k miles on it. Wife just got back from a 1k mile road trip with it.
I took it for a little ride, and noticed this problem about 3 times, it doesn't happen every time. There is no vibration or anything when slowing down and stopping. But, a few times, when the car was at, or almost at a complete stop, the brake pedal would feel like it was buzzing a little bit, and I could hear a springy sound. I tried to reproduce it with hard braking, but couldn't. Seemed to only happen with slow, gradual breaking, and when the car was just about at a complete stop. Brake fluid is full. No lights on dash. Asked my wife if she slammed breaks at all, or had any problems, she said no. Then she said she experienced what I did once, when she was at a rest area, stopped
The only thing I can think to compare it to is how the brake pedal feels and sounds if you lock up your brakes, and the ABS is doing its thing....which I haven't ever done with this car...
View 11 Replies
I have a 2012 sonata that has issues from day one. ?
New issue is: For a couple days now I've noticed a crackle noise when I break. It is only when I am coming to a complete stop that the noise happens, not the full time i actually have foot on break.
Not thinking it is the bearings. Thinking it may be something within my suspension.
View 3 Replies
I bought a new 2012 Elantra in March. Every so often I get a strange vibration through the brake pedal when I'm at a complete stop (red light/stop sign). It happens intermittently and I can't narrow down any exact cause. It happens when the engine is cold, fully warmed up, A/C on, A/C off, only been driving for a few minutes or driving for a few hours. No system lights come on. I've taken the car to the dealer twice and discussed this with them. They've not hooked it up for any diagnostics as yet. I don't think it's a vacuum line, engine or transmission issue because it is intermittent. I also don't think it's a defective engine/transmission mount. Could it possibly be the ABS module?
View 7 Replies
I have only 42k km or 26 k miles. Brake stops but soft. The brake pedal sink if you apply pressure after a stop. Feels like someone open a valve. The pedal go to very low. I am find the stopping power is poor. Brake fluid is brownish. I hope it is not the master cylinder.
View 20 Replies
I own a 2015 camry SE - 4k miles on it. Right from the second month I felt like the brake was stiffer and I always felt like I am going to rear end the vehicle in the front. Last one month it became really worst. The pedal feels lot stiff and I have to press hard to bring to a complete stop. Brake is not very responsive. I feel like its still rolling even after applying the brakes and I have to apply the brake very hard to come to a stop. It looks to me like there is a response delay between applying brake pedal and actual stop. I used to drive a Civic and this is my first Toyota so I am not sure whether this issue is common in camry.
View 6 Replies
Notice a clunk noise when brake applied and first it seems when the car is turning right, but now I think as long as the surface is uneven it would do that as long as the brake is applied at the same time. It's a 2014 Sport Ltd.
View 4 Replies
I own a 02 fwd v6 Santa Fe that just lost power on the interstate. It will go about 20 miles an hour and basically does not change gear unless it is in manual mode. I was able to drive it to a local repair shop but they are having trouble figuring out what is wrong with it.
First, they told me the plugs and wires were bad, changed those and still no power. Next, they told me it was the fuel pump, change that and still no power. Next, they said it was the catalytic converters but the said they unhooked them to test the theory and it still had not powered. They said it may need back pressure from the cats so that may not work. They want me to buy them but they are very expensive especially on a guess. Next, they told me if that does not fix it is must be the transmission. Will the cats off keep it from running due to back pressure? Does it sound like a transmission issue or could it be something else?
View 5 Replies
I was driving along nicely, then faced with a climb up the hill, I floored it ... the throttle stuck fully and the revs up to 5000 RPM and the governor kicked in, zoom ... hmmm zoom hmmm .. I was lucky cuz I shut off the engine and was able to coast back down to my driveway. No code reader, I decided "how hard can that be" since it happened once before and then worked ok for 6 months ... maybe a linkage, etc
A friend looked at it and tried the old process of elimition ... unplugging the MAss Air Flow connector ... trying it ... then the TPS on the throttle body. He suspected one or both. So I replaced them... happy to get the sucker started without revving uncontrollably. But the pedal was sticky, the idle speed too high and when you press the brake pedal ( and nothing else ) the car stalls, putt putt putt kerplunk. Starts up again tho. but impossible to drive like this. So I gets me a code reader .. follow the directions and this is what I get now
P0441 Evaporative Emission system Incorrect Purge Flow ( this is an easy one even for me ... the engine light came on last time I fueled up - gas cap was not turned enough ) no brainer
P0122 Throttle / Pedal Position Sensor A Circuit Low Input
P0101 MAss or Volume Air Flow Circuit Range / PErformance
P0222 Throttle / Pedal Position Sensor B Circuit Low Input
P2119 Throttle Actuator Control Throttle Body Range / PErformance
P2112 Throttle Actuator Control System Stuck Closed
P2422 Evaporative Emission System Vent Valve Stuck Closed
Puzzling since whatever broke started working again spontaneously last time. I figure, it cannot be all the above at the same time .. perhaps one of the early sensors?
View 18 Replies
