Taking longer and longer for key fob to open doors, etc. Assume the battery needs to be changed. Have no problem with other fob. How do you change the battery in the key fob for this year model.
View 13 RepliesI've got a '12 GTI (bought 10/1/12) with just over 20k miles on it. Everything on the car is stock and original - pads, rotors, calipers - and the brake fluid hasn't been flushed yet. The last few months I've noticed an increasing sponginess to the brakes, the pedal taking longer to depress before I feel significant stopping.
Pads and rotors still look good. Fluid level's normal. At best it feels like maybe some air pockets might've worked into the fluid lines. At worst it feels like maybe a leaky master cylinder. I'm wondering if it's a common problem.
Just recently I"ve noticed my Pri-v is taking longer, and not as often switching to EV. All these observations are after the car has been fully warmed up and driven for several miles with a sufficient battery charge. Previously it would always switch to EV at 43mph when letting off the accelerator.......and I could keep it going usually till about 45.... A quick let of the accelerator would almost always accomplish this. Recently it has not been consistent...a few times not even shutting off when the car is stopped. The car has about 88,000 on the odometer. I've always noticed when it does go from ICE to EV, the transition is not a smooth too. That I"m guessing is the transmission fluid?
View 9 Replies02 Ranger 2.3 4cyl 5 spd 115K.... My A/C seems to take longer and longer to start cooling/ When it does start cooling it seems that is is actually colder than it has ever been (original owner) and the control is more sensitive to the touch when moved. Being a 4 cyl it's easy to detect when the compressor kicks in and it seems each time it is taking longer to do so. If I stop the motor, it goes thru the same cycle of time or longer before cooling (compressor kicking in) again. No codes, No unusual noises.
View 5 RepliesI have a problem that before was working fine, I don't know if i disabled it or something. But my proximity key when i used to approach the car and press that small button on door handles would open my doors. Now that button don't work. I have a feeling i pressed something.
View 8 RepliesTried finding any possible way to connect the map lights to the done so they both turn on when doors open...??? I have a se with no sunroof.
View 5 RepliesI think one of my family members left our 2006 Prius on overnight. Now the doors won't open except with the key and the car won't start. Can the auxillary battery be charged with a battery charger like on a "normal" car?
View 3 Replies2003 accent. I had an intermittent starting issue, nothing serious. Then one day dead in the water. Had it in my garage so i changed all belts, Crank position sensor, starter and solenoid. It seemed to start different, a little longer than usual to start, but started. Drove it for about a week and dead again. Dont know if it was chance or not but as weather got colder, seemed to take a little longer to start. Cranks but does not fire. I can hear fuel pump priming. I took the spark plug wire and held it next to frame and did not see a spark. To double check i tried ether and still would not turn over. Assuming fuel is not an issue at this point. How ever i did get an evap code p0441 but it went away. I am stumped at this point. I am not very good at electrical on vehicles. I want to check coils, and work my way back but not sure if I am doing it correctly. Most vehicle videos don't have the same parts.
View 13 RepliesAlright so I've had this car for about six months now and the clutch was supposedly replaced by the dealer I got it at. The clutch usually grabs about half way up but sometimes it's higher. I replaced the master cylinder because it blew out, when changing my I take I noticed the slave was starting to leak so I replaced that about three weeks ago. Ever since then, the clutch seems to grab differently and seems to be taking longer to engage.
Now, I did the "slave mod" on the old one AND the new one so it's not that. Do you guys think the new slave is bad? I have high temp dot 3 in there (I try to only use the best fluids for my cars). It just doesn't seem to grab as hard as she used to. Like it takes a bit longer to engage. The clutch (should) only have 15k miles on it. The clutch parts are under warranty but I'd still have to pay for labor since it's a wear part. I'd like to avoid replacing it if it's that new u less it's definitely going.
On my 09 accent, it's been cranking slow/taking longer to start. Occasionally it won't even have the guts to spin the starter (clicking solenoid noise).
I checked the battery (<1 year old), and it has a resting voltage of 16.2 (?!) When running, it jumps to 17.4. Is this a bad alternator?
Prius sat in my garage for about a month without moving went to start it up had 0 power, the unlock button on the keys wouldn't even open the doors. So I tried to jump start the car which would kind of work. The car would turn on for a few secs maybe 5 sec then turn right back off. So had the battery tested and came back as bad battery.
View 13 RepliesI've got a prius 2010, how do I lock the car with one of the doors (or hatchback) still open? The car just beeps at you until you close a door... And then it stops beeping, but doesn't lock. I find this to be exceedingly annoying, I'm surprised I couldn't find more than 1 other thread complaining about it. I find it annoying in two common situations:
a) I plan on locking the car with the fob, filling both of my hands full of things and pushing the door shut with my butt. I have no free hands left to find the fob in my pocket and lock the door, or walk around to the driver's side of the car to touch the lock sensor.
b) A passenger is dawdling getting all their stuff ready and plans to catch up with me in 30 seconds. I need the lock the car before I walk away.
Recently my 93 Ranger 4.0 has started to take longer to shift into 2nd gear and the rpms are way up there. shortened 2nd gear then 3rd will be fine and so on. This only happens after the engine goes completely cold. I took it to a transmission shop and they said tranny is fine...Other than this issue the truck is fine.
View 6 RepliesI've had my 6.0 for 2.5 years now and got really acquainted with what makes what noise, and how long starts took etc. recently this morning, i had a longer start, longer than a normal long start (4-5 seconds). Felt too long to me, but it started and didn't turn it off to try again. Got to my destination, turn the truck off and brough up ICP, FICM, FICM SYNC and cranked and watched.
After 1 second ICP jumped to 600 then to 770 and 2-3 seconds later FICM sync finally read 1 and it fired. What can be causing the sync to take so long? I have had intermittent no starts before, maybe 4 in the 2.5 years i've had it and every time i have pushed on the fuse blocks by the driver batteries, and also pushed on the FICM connections to make sure everything was okay. That seemed to always work.. But no amount of pushing on them are solving the long start that is happening...
07 Prius, non smart key. One fob failed, other one works but button covers worn off. Purchased new fob, did the chicken dance, fob will now start car... but will not open/lock doors remotely. Took battery from working fob and put in new fob, no difference. New fob light blinks like the old working one when buttons are pressed. I do not have the "fob" button under the steering column, just a tire pressure set button there. In another thread someone wrote that with the new fob in the slot, start the car, and open and close the door, and function the locks to set new fob to be able to operated the locks... no luck.
View 4 RepliesI've got a cheap little ELM327 dongle that I was able to use to fix the dreaded backup beep on my 2013 Trim 2. What I'm looking for now are the codes to change the keyfob function so that the first press of the unlock button hits all the doors and the hatch - currently it just unlocks the driver door. (note: this is distinct from the number of doors that unlock when I touch the driver handle - I am aware of the "press both buttons" trick for that).
View 1 RepliesI have my doors set to unlock when I open the driver door. sometimes they do not unlock, there is no rhyme or reason for it, just it gets a wild hair and they don't unlock, drive to the next location and it works as advertised.
View 8 RepliesOk I've got an 01 F250 sd 7.3 with 257k on it it just started talking longer to start than it should it will do it cold or hot even if I shut it off at the drive thru takes it like 10 sec or more to fire. My question is I thought about purchasing a autoenginuity to find the problem but not sure the best place to get and what model I should get.
View 7 RepliesI rarely drive with anyone else in my 2004 Prius. This week we've had out-of-town guests, with two people in the back seat. When the doors are locked, the front seat passenger can pull on the handle to open the door, but the back seat passengers can't open their doors with the handle until someone in one of the front seats pushes the door unlock button. The child safety locks are not set. I keep getting out of my car and forgetting to push the button to let the back seat passengers open their doors. Is there anything I can do to change this rear door behavior?
View 2 RepliesThe little device that hold doors open (so they don’t swing freely) aren’t very effective on my ’09 model. Actually, it's only a problem on the front doors. The rear doors hold position quite well. The front doors have always been a problem and I wonder if is this typical. Is there a fix (other than replacement)?
View 6 RepliesI'm Using Maruti Suzuki Swift Dzire. Till last month my car used to unlock doors automatically while taking the key out. Now the problem is :After turning off the ignition & taking the key off Car doors are not unlocking automatically. If doors are unlocked manually from inside by pressing unlock button situated in the car, doors are unlocking. If I unlock the doors manually and open the doors, I'm unable to lock the car with the remote key after closing the doors.
View 3 Replies