I just hit 20,000 miles and my Hybrid System Indicator Trip B which has my historical data was reset to zero.
When I got to the first 10,000 miles it did the same thing but at that time I thought I reset it by mistake.
Just bought a new 2012 Prius Plug-in on Friday. Still learning the ropes. I've selected EV mode, and the EV mode indicator light is lit up as it should be on he dashboard above my steering wheel. As would be expected, to the right, the Hybrid System Indicator bar features a little car sitting on top of it with the letters "EV."
However, after a few minutes of driving, the letters "EV" disappear from the little car in the Hybrid System Indicator. The indicator doesn't switch the to HV screen (where the main bar is divided into two halves), but remains in the EV screen (where the main bar is undivided, with a little nub on the left for "charge" and on the right for "power.") And the EV mode indicator light above my steering wheel remains lit.
A few minutes later, the "EV" letters appear in the little car once again. Then they disappear, then they come back again. All along, I've had plenty of mileage left to go in EV mode (more than 6 miles).
Is this normal behavior? Is this simply what happens when the ICE kicks in despite being in EV mode? (And the ICE definitely kicked in - I saw that on the Energy Monitor graphic. And I understand why - it's been very cold here [northern NJ].)
2014 prius plug in.
My nephew borrowed the car for an hours and after that probably he went on a highway the hybrid indicator light is red and also the power light is red.
I was curious how you can get rid of an annoying "check hybrid system" dash warning?
View 1 RepliesThe engine check light is ON this morning. It said that there are problems for the hybrid system on the display. I sent it to dealer immediately.
View 7 RepliesI was driving my plug-in yesterday on the freeway and suddenly it alerted me the following:
Check Hybrid System
Stop the vehicle in a safe place
I pulled over to the side and tried to reset the message (push power button 3x), but message still was coming up. With my Toyota dealership not too far away, decided to bring in my car to have it checked out.
After 2 hours with their hybrid tech, they were not able to replicate the message (of course, always the case), but the tech was able to catch a P0C3E error from their diag tool. Being that they could not replicate the issue, they released my car and started to bring it back it the issue persist.
New 2015 PIP, got it 2 months ago, and it drove fine till Thursday, when this message came up. I believe I first got a "Charge interrupted due to malfunction" and then the dreaded "Check Hybrid System, Stop the vehicle in a safe place." alert with all the engine lights on.
Took it to the dealer and they charge it up, cleared the message, and gave it back. They told me it was because I shared the car's outlet with something else, and then threatened to charge me money if I came back because it was my fault. Took it home, charged it exactly the way they told me to, and this morning the error message came back up. Going to take it in to the dealer tomorrow.
Yesterday while driving on the freeway in EV mode, my PIP (one of the first delivered to the states) flashed the "Check Hybrid System - Stop the vehicle in a safe place" message. I was near my house so I just went home. My SG2 showed code P0C3E, which is apparently an inverter over temperature code.
Took it to the dealer this morning and they just informed me that the car needs a new inverter, but no other details… "internal fault" is what he said.
While googling, i found this recall notice:
Green Car Congress: Toyota recalling about 701,000 Gen 3 Prius vehicles in US over software issue in inverter assembly
that doesn't talk specifically about the PIP and implies that it is a software problem, but goes on to say if the car is in a fault condition the inverter will be replaced. of course, it's possible that a software problem leads to hardware damage.
I was curious how you can get rid of an annoying "check hybrid system" dash warning?
Let's just say I know for certain nothing is wrong. It's only cause I accidentally disconnected and reconnected a wire. Just need to reset is all.​
I have some condensation forming on the inside of the plastic cover over the HSI. Is there a way to remove the plastic cover to dry it off?
View 2 RepliesFor the past few days, when I press the power button, I hear the beeps and then every dashboard symbol appears - except the Hybrid System Indicator screen is completely dark. The car seems to be turned on - but when I try to put the car in reverse to back out of my garage, it won't change gears. When I go to press Power to shut it down, it takes about 5-10 seconds to shut off.
I found that opening and closing the driver's side door reset something so that the HSI turns on and the car eventually starts.
My 2010 Prius Hybrid System Indicator suddenly becoming cloudy one day. Its inside the glass cover and I initially thought it was condensation, but it hasn't gone for several weeks.
I have the Toyota Extra Care Platinum extended warranty, so took my car to a Toyota dealer. They said it was due to some chemical reaction from something I used.
I found that ridiculous because I don't use any chemicals on my car, let alone myself but they didn't budge. I have to call Toyota & see what they have to say.
I'm driving a loaner Gen 3, and for some reason, I can't access the energy monitor or hybrid system indicator screens. Is there a setting from the Settings screen or something I can access via Techstream?
View 1 RepliesI am having a gen 3 prius and yesterday when I am driving on a humpy road.(village side road) i got this message on the prius hybrid indicator screen, with orange color engine light and orange color triangle warning light. But still i can drive the vehicle and it charge the hybrid battery and everything going OK. I got really got fuel economy too after getting the warning message. Only thing is the message is appearing every time at the screen, What should i do now.
View 5 RepliesI have a 2008 Prius with 106,000+ miles on it. It was running fine till 2 days ago, I didn't start it yesterday and today when i went to start it, I get the Hybrid System Malfunction light, along with check engine, the red triangle and TPMS light. The gas engine tries to start up, then 1 second later makes a grinding noise and turns off.
I am in Toronto and its cold, but not THAT cold yet. So I am doubtful its temperature related. I checked the fluids and they all seem to be sufficient (engine oil, radiator fluid, power steering fluid). I didn't notice any leaks under the vehicle either.
I've been trying to locate the TPMS Reset Button on my 2013 PIP. I've searched and saw that it's near the bottom of the steering column but I didn't see it.
View 5 RepliesOn my way home from work tonight, the master warning light and the check engine (malfunction indicator lamp) appeared on the dashboard, and the hybrid system warning light has popped up on the multi-informational display.
View 11 RepliesI have a 2005 Prius with around 115,000 miles.
I have the following warning lights on:
1) Check Engine
2) Yellow Indicator, looks like exclamation point inside a circle inside parenthesis.
3) Red Multi-information display (exclamation point inside a triangle)
4) Hybrid System Warning Light on display screen, looks like exclamation point through a car
The engine cranks up just fine and drives forward and backward in the driveway fine. Battery level indicator is blue (see image). I checked for turbulence in the inverter reservoir with the engine off and fluid was flowing.
I checked the 12V battery (using the car's measurements by holding Display and turning lights on and off 3 times) and its value was 12.1 volts without engine and A/C on and 11.8 volts with them on.
The fan in the back right passenger seat is always on now though (I don't remember ever hearing this fan noise before), regardless of engine on or not, even though it's only about 80 degrees outside and it's been sitting idle all day and all last night. It comes on pretty much immediately when the power button is pushed.
So at 3 months and 4700 miles on the OD my car threw an over temp indicator driving to work. 5:30 am about 60-65 degrees with a passenger driving over the Santa Susana grade which is a 2 1/2 or so mile grade it starts showing the over temp indicator.
I had not plugged in the night before and had only been in the car for about 7 minutes. I was driving somewhere around 70 miles an hour and that ICE was screaming like it always does. As I backed off the throttle the lamp went out and I cruised it to work. I checked under the hood at work and sure enough it had spewed coolant around the pressurized coolant tank.
Great car, Love it! It's a big improvement from the 2006 Prius.
When applying the brakes and holding the pedal down, I notice that the indicator for slippery/traction yellow icon appears in my dash when completely stopped.
There is no map option on the steering wheel that allows you to switch back to the Nav/Map system on the HD display. Is there a voice command?
Does PIP have two different batteries for each mode (EV and Hybrid) or is it the same battery?
View 10 Replies