2014 prius plug in.
My nephew borrowed the car for an hours and after that probably he went on a highway the hybrid indicator light is red and also the power light is red.
I was driving my plug-in yesterday on the freeway and suddenly it alerted me the following:
Check Hybrid System
Stop the vehicle in a safe place
I pulled over to the side and tried to reset the message (push power button 3x), but message still was coming up. With my Toyota dealership not too far away, decided to bring in my car to have it checked out.
After 2 hours with their hybrid tech, they were not able to replicate the message (of course, always the case), but the tech was able to catch a P0C3E error from their diag tool. Being that they could not replicate the issue, they released my car and started to bring it back it the issue persist.
Just bought a new 2012 Prius Plug-in on Friday. Still learning the ropes. I've selected EV mode, and the EV mode indicator light is lit up as it should be on he dashboard above my steering wheel. As would be expected, to the right, the Hybrid System Indicator bar features a little car sitting on top of it with the letters "EV."
However, after a few minutes of driving, the letters "EV" disappear from the little car in the Hybrid System Indicator. The indicator doesn't switch the to HV screen (where the main bar is divided into two halves), but remains in the EV screen (where the main bar is undivided, with a little nub on the left for "charge" and on the right for "power.") And the EV mode indicator light above my steering wheel remains lit.
A few minutes later, the "EV" letters appear in the little car once again. Then they disappear, then they come back again. All along, I've had plenty of mileage left to go in EV mode (more than 6 miles).
Is this normal behavior? Is this simply what happens when the ICE kicks in despite being in EV mode? (And the ICE definitely kicked in - I saw that on the Energy Monitor graphic. And I understand why - it's been very cold here [northern NJ].)
I just hit 20,000 miles and my Hybrid System Indicator Trip B which has my historical data was reset to zero.
When I got to the first 10,000 miles it did the same thing but at that time I thought I reset it by mistake.
The engine check light is ON this morning. It said that there are problems for the hybrid system on the display. I sent it to dealer immediately.
View 7 RepliesSo at 3 months and 4700 miles on the OD my car threw an over temp indicator driving to work. 5:30 am about 60-65 degrees with a passenger driving over the Santa Susana grade which is a 2 1/2 or so mile grade it starts showing the over temp indicator.
I had not plugged in the night before and had only been in the car for about 7 minutes. I was driving somewhere around 70 miles an hour and that ICE was screaming like it always does. As I backed off the throttle the lamp went out and I cruised it to work. I checked under the hood at work and sure enough it had spewed coolant around the pressurized coolant tank.
Great car, Love it! It's a big improvement from the 2006 Prius.
When applying the brakes and holding the pedal down, I notice that the indicator for slippery/traction yellow icon appears in my dash when completely stopped.
There is no map option on the steering wheel that allows you to switch back to the Nav/Map system on the HD display. Is there a voice command?
I've owned a 2014 Prius Four (not IV, Roman numerals were for model year 2010) w/o Nav for just about a year now. I've encounter this mysterious condition three times now where when I turn on my car, all I see on the front displays are the READY light on the far left and the mini-display that shows the shift pattern.
* Both the speedometer/fuel gauge display on the left of the shift pattern display and the "Hybrid status" display on the right of the shift postion display are OFF.
* The car operates normally (it's not in a limp-home mode).
When I first encountered this issue and reported it to my local dealer, they suggested I take a video of it with my smartphone. I did so the car (and a copy of the video) is now at the dealership.
The second and third times this issue came up, I took videos and did some additional testing.
- When these two displays are OFF, there is no backlight to the climate control LED display underneath the stereo...
- I normally drive the car with the headlamps in "AUTO" mode. When you shift the headlamp switch to "DRL off", the two missing displays automatically power on. In any other position (Auto, corner marker lamps only, or headlamps ON position) the two displays in question turn off.
- The issue isn't with me accidentally turning the dimmer switch too low. When the dimmer switch is set to max low and the dash light sensor is covered (emulating complete darkness outside), all three displays on the dash (including the shift position display) are barely visible/look off. As the service advisor saw in my video, that's not the case.
This is clearly a safety issue ("you cannot tell how fast you are going" and "you cannot tell easily how much gas you have left without going through the infotainment display) so for now the dealership at least seems to be on my side in that something needs to be repaired. The good news is that now that the issue has been documented in my service history, they did comment that it will get fixed eventually even if the issue comes back after test. For now, the dealership is stumped so they asked Toyota for guidance on what parts to try replacing.
Does PIP have two different batteries for each mode (EV and Hybrid) or is it the same battery?
View 10 RepliesJust curious, is the low speed electric acceleration in *hybrid mode* generally, seat of the pants, noticeably more robust than that of the 'regular', 3rd gen Prius? By low speed, I mean starting off from stop lights in normal driving.
Why do I ask? In 3rd gen Prius, electric acceleration lasts only a few seconds from a stop, maybe up to about 15 MPG roughly with light acceleration. With heavy throttle, gas engine comes on about right away.
How does the PiP behave under moderate acceleration from stop in hybrid mode? Could we say PiP accelerates on electric drive in HV about 6 MPH per second +/-x up to 25 MPH +/- x on level ground, etc....?
I let a friend drive my car for the first time today. Before today I always had a key with a slash through it that blinked until I started the car. Now that has disappeared and the hybrid lock indicator light is on instead. My friend left the car on, by mistake, while she went into the store. She tried repeatedly to lock it, and of course it wouldn't. Did this change something in my indicator lights?
View 10 RepliesNew 2015 PIP, got it 2 months ago, and it drove fine till Thursday, when this message came up. I believe I first got a "Charge interrupted due to malfunction" and then the dreaded "Check Hybrid System, Stop the vehicle in a safe place." alert with all the engine lights on.
Took it to the dealer and they charge it up, cleared the message, and gave it back. They told me it was because I shared the car's outlet with something else, and then threatened to charge me money if I came back because it was my fault. Took it home, charged it exactly the way they told me to, and this morning the error message came back up. Going to take it in to the dealer tomorrow.
Yesterday while driving on the freeway in EV mode, my PIP (one of the first delivered to the states) flashed the "Check Hybrid System - Stop the vehicle in a safe place" message. I was near my house so I just went home. My SG2 showed code P0C3E, which is apparently an inverter over temperature code.
Took it to the dealer this morning and they just informed me that the car needs a new inverter, but no other details… "internal fault" is what he said.
While googling, i found this recall notice:
Green Car Congress: Toyota recalling about 701,000 Gen 3 Prius vehicles in US over software issue in inverter assembly
that doesn't talk specifically about the PIP and implies that it is a software problem, but goes on to say if the car is in a fault condition the inverter will be replaced. of course, it's possible that a software problem leads to hardware damage.
Yesterday, I was driving home in EV mode, PHEV on, about 80°F, no hills, not accelerating, SOC about 4 bars, about 1/2 mile out, when it dropped out of EV mode, and then I got the red triangle and the check engine light. Today I grabbed the code with an OBD2 reader, and got this:
Freeze Frame Information:
1. DTC for which Freeze Frame was Stored - P0A92.
2. Engine Coolant Temp - 138.20 °F.
3. Engine RPM - 1,888.00 Rpm.
4. Vehicle Speed Sensor - 14.91 Mph.
5. Intake Air Temperature - 96.80 °F.
6. Time Since Engine Start - 101 Sec.
7. # Warm-ups since DTC Cleared - 74.
8. Distance since DTC Cleared - 706.50 Mi.
9. Control Module Voltage - 13.69 V.
10. Ambient Air Temperature - 80.60 °F.
11. Accelerator Pedal Position D - 30.98 %.
12. Accelerator Pedal Position E - 46.67 %.
13. Time since DTC Cleared - 30 Hr32sec.
Does this happen because it's in EV mode? Do I just have to put up with it every so often? (This is the second time it happened.)
On my way home from work tonight, the master warning light and the check engine (malfunction indicator lamp) appeared on the dashboard, and the hybrid system warning light has popped up on the multi-informational display.
View 11 RepliesMy 2005 prius with 81k on it just had the Hybrid vehicle immobilizer / Theft deterrent system indicator light spontaneously come on during a road trip where she was heavily loaded for the very first time since I have owned her for over 10 years. I stopped at a rest area and when I got back in it was on...immediately my batteries started draining. They are in 50wh mode which has never happened before, and charge will driving, but if I shut down for even a few minutes they are drained again. The dealer told me this was nothing to worry about and that as soon as they fully charged this would stop.
View 2 RepliesJust bought a 2014 PIP Base and really want to set up that cool feature that tells you how much money you're saving compared to your old car. How to do it? I can't find the feature anywhere in any menu system nor can I find it in my manual.
Perhaps the answer is the PIP base doesn't have that feature?
Brand new 2014 Prius Plug in. I am getting about 45 mpg on a 14-mile all-city trip and 46 mpg on a 30-mile mixed hwy/city trip. The mpg numbers are from the information display when the car were turned off.
Is that normal? I thought it's supposed to be about 50 mpg. Btw, ECO mode was enabled.
I went to drive to work today and found that my battery was drained. None of my interior lights were on and I'm 100% sure I turned the car off last night after I backed it into the garage. Last night I drove the car home and was mostly on EV, but drove the last 3-4 miles on ICE. I had the car charging overnight too. This morning, with the battery dead and the cable plugged in, it was making a click sound near the fuse box when I tried to start it.
The passenger seat's heater was on (I think) and I don't think any of the doors were ajar. The only door that could have been opened would be the driver's but I don't think it was half closed.
I recently purchased a Rear Bumper Protector for 2010-2014 Toyota Prius for my 2014 PIP. I thought I had it in the correct position when I removed the adhesive strips to install it but realized the next day that the curvature is not lined up properly causing a gap in between the bumper and the protector. My stomach sank when I realized this error.
View 8 RepliesJust got a "Check hybrid system" message and the triangle of death is on my 2010 Prius -- but I can still drive it...
Toyota's Emergency Response Guide says this error is triggering by the ground fault monitor that is connected to the 12v aux battery.
HV battery pack ( HV battery fuse, two 12v relay)
HV battery inverter/converter
My 2010 Toyota Prius III has 37400 miles and I've had it since 2010 April.
My ScangaugeII didn't find any OBD2 diagnostic codes