Prius (Gen 3) :: Press Brake And Push Power To Start
Feb 23, 2015
Yellow triangle lighting up together with check engine light.
Also when turning it on display says to press brake and push power to start.
Yellow triangle lighting up together with check engine light.
Also when turning it on display says to press brake and push power to start.
I have a 2010 Prius Hybrid and lately, on an intermittent basis, I will press the brake pedal and push the start button and the dashboard lights up as normal but when I go to put it in gear nothing happens. The last time it happened the fan was running and I couldn't turn it off. It's like the car is all set to go but all the interior controls don't function. I then shut it off and restart it and everything works.
View 1 RepliesI have a 2007 Toyota Prius. When I press the brake pedal and press the start button the engine does not start or the wheels are not powered by the battery. It gives me the following errors:
The indicator in the Start button lights in Amber Color.
0 kmph mark is not activated in the dash board pannel.
When I shift the gears it only shifts to neutral ("N") gear.
I cant move the car forward or backward. An error message is displayed in the MFD in Japanese language. It is in Japanese and I cant read the error message.
Several times my 6 month old Prius v Three refuses to start. I've taken it to the dealer 5 times now for an array of electrical issues. I was told the keyfob wireless signal isn't reaching the Power pushbutton on the dashboard & to not ever put the keyfob near my cell phone & to put the keyfob as close to the Power pushbutton as possible.
View 1 Replies2008 ls 460 won't start when I press brake and start engine button. Car battery is strong. Tried two different keys. Start engine button has green light and when push all dash lights come but engine does nothing. Tried holding Lexus emblem on key next to button and pressing unlock button on key several times. Nothing?
View 4 RepliesI have 2011 SE, it won't start at all. The car won't start all thou all electrical are working (radio, NAV, Dashboard) but when trying to press the break pedal is hard as a rock. Dashboard computer at times tells me to press the break pedal - but it wont start, it actually turns off when i press the break and hit the start button. It happen twice before was able to start it within couple minutes.
View 24 RepliesIs there anyway to disable this annoying "press brake pedal to start" on the 2010 with Vag Com or some other magic tricks? I searched and found a thread but no solution if there is any.
View 8 RepliesAre brake noises normal for the 2010 Prius? I often hear little grunts or barks when I push on the brake - sounds like air or gas. Should I take it in or ignore it?
View 19 RepliesWhenever I stop the car I push the P button, and the push the foot parking brake, then I stop the car with the start/stop button. Yesterday I started the car, and forgot to push off the parking foot brake. I put the stick on D and then I started to roll, after two seconds I saw the red lamp on the dashboard telling me there's a problem, so I check and to my surprise I saw that the break was on.
View 19 RepliesRecently the brake pedal on my 2002 Prius has been a little harder to push for the first mm of travel it almost "sticks" requiring slightly more effort once it moves past that point it is normal no fading or extra effort required this problem has now progressed to the point where the pedal is kind of crunchy for the first 5mm of travel and occasionally will not return right away causing the brakes to drag a little but again pressure required to stop is exactly the same no fading etc
I am thinking since I live on 2 miles of dusty washboard dirt road and some grit has worked its way into the bushing .
My 2006 Prius with 206k miles is making a loud buzzing/grumbling noise when I press down the brake and periodically when parked. It's coming from the general area of the brake pedal, under the steering wheel. See video for a recording of the sound:
View 2 RepliesI am looking to buy a 2012 Prius and I test drove it. Everything seems ok except each time I press the brake pedal there is a swoosh noise its as if air is being released from somewhere and I can easily hear it. Is this normal? the car is 95000 km on it. The dealer says it might be a normal hybrid noise. I currently have a 2007 Prius but that does not make this noise.
View 5 RepliesRecently, when I ever press the brake while the head light or three AC is on, an error message appear for a few seconds ark malfunction.
View 6 RepliesI can press on the brake pedal when car is off or on and there is a kind of quirky sound made. I can hear a pump sound and then a squeaking or quirky sound. It happens every time I press the pedal when it is stopped, either on or off.
View 2 RepliesMy 07 prius with 190k started shaking violently when going down hill if I press the gas or brake at all is goes a way suddenly, this happens only around the high 40's to low 50 mph range and once at 75, this happened just after my tires where balanced and rotated brought it back they re balanced them and said they balanced out perfectly and the problem still protested. I drive on dirt roads all the time and i hit a big pot hole earlier last spring but the issue just started after the balance a week ago.
View 13 RepliesI drove my 2005 Prius 2 hours and parked it for 5 hours. No problems on the trip down. I got back in it and it started up just fine. I was sitting in the parking lot with my foot on the brake (hadn't moved yet) and the following occurred:
The brake pedal seemed to push back on my foot
The red exclamation point illuminated
The yellow exclamation point illuminated
The ABS light illuminated
The VSC light illuminated
The red parking brake light illuminated (not shown)
All of these lights point to the skid ECU. It seems like my skid ECU is toast or something called the ABS & BA & TRAC & VSC Actuator is an issue (never heard of it but I see it connected to the skid ECU). I did a visual check of what I could and everything seemed in order. I pulled a bunch of fuses and I didn't notice any that were blown. (I didn't pull them all but will tomorrow)
After not finding anything, I drove back home. As expected, I had no regen but the bigger problem was that I had no power assist on the brakes. A few times I actually did skid and the car brakes really bad without regen or power assist. If it was raining or snowing I could definitely see a hazardous situation.
I'm kind of at a loss here. Tomorrow I'll pull the kick panel down and see if the skid ECU is getting power but I can't think of anything else that would cause this situation.
I've a UK 2004 gen ii with 69000 miles on the clock. When coming to a stop and also when at a stand still if I press down the brake pedal I get a rather loud creaking sort of noise. I guess that's friction brake related as no noise with using brakes when driving. Also a high pitch squeal when driving and turning steering wheel slightly to the left that stops when you press the brake pedal.
View 19 RepliesI just purchased a 2014 Prius C and am having a problem with the Hill Start Assist/Control.
At every single stop, no matter how lightly I press the brake, when I release the brake the car stays in place for two seconds (no gas), and then starts moving.
I am assuming this is the HSC and not a normal function on the car.
If I depress the brake all the way no lights come on, no buzzer sounds, but the above described behavior still happens. I've tried the light stops on up hills, down hills, and flat ground, it all is the same.
I have a 2010 prius and I have to hold the key next to the push to start button. I took it to the dealer and they told me they had to change a smart key module and 2 new keys. I told them to do it. I picked it up and worked great, 2 days later the same thing happened.
View 11 RepliesCan install a push button start feature on lower models of the Prius C? Example: I've been looking at C's but cost is a big issue. I figure I should wait to get a higher model with push start to get the whole Prius experience. The PC 2 is more in my price range, though.
View 3 Replies2005 Starts fine after first start. Ficm voltage 47 to 48 on Edge insight, stc replaced...
View 14 Replies