I pull into garage, get out, lock the car with key/handle swipe, and walk upstairs. I go back 2 hrs later, engine is still running, although the key is far away (in my kitcehen upstairs).
1. Should the engine shut down when key goes out of range?
2. If not, can it be programmed to make it happen?
So, I got my explorer about 3 months ago and it has never locked, the door ajar light was always on and I fixed that by using some WD-40.
Now that the door light is off, the explorer beeps once when i lock it using the key fob but it doesn't actually lock. When I use the lock switch in the rear (by the spare wheel tools) it will lock and unlock. The driver's door lock switch won't lock or unlock, the passenger will unlock but won't lock.
Stock alarm system.
This problem began a short while ago. It started with the keyfob not locking the left (driver) door from the outside and progressed into not locking the left door with the inside automatic switch. Now the left back door will no longer lock with the either device. I think I have narrowed it down to the switch or the door solenoid, but I am lost on the possible problem in all honesty.
View 7 RepliesHad a CEL and went to Autozone to have them read the code. Guy cleared the code then the car wouldn't start and it locked the key in the ignition. After a minute, it started, but now the doors will not lock either by switch or by fob. They don't lock at speed. Also the soft-close system is failing to work on all four doors. Did this dude wipe out my lock programming or something? The alarm still works but the doors won't lock and the child lockout buttons don't work either. Maybe I should get a programming tool?
View 4 RepliesSimultaneously driver door lock switch does not work but door lock when shifting into drive and when shifting into park. RR passenger door lock is jammed, cannot move electrically or manually. All this at the same time!
View 1 RepliesI have a 2002 Saturn Vue with a couple of miles on it (228,436 to be exact). I bought the car used in 2009 with 150K miles. Since I bought the vehicle, the electric door locks have stopped working, both with the key fop and with the door lock switches. This all started with the key fob working intermittently, and eventually degraded to the door lock switches not working. When I press the door lock switches on any of the doors you can hear the relay try to engage, however the doors do not lock or unlock. This is particularly interesting since now when I turn the ignition off, instead of unlocking the door, the system locks three of the doors and the hatch (it does nothing with the driver side door). I am not sure where to start looking for the root cause of this problem.
View 6 RepliesThe door lock switch on the driver's door isn't working. All other lock functions work. Is there a setting like auto lock or something that disables this, or is it another issue.
View 3 RepliesI want to be able to turn the car on and warm up the cab before I drive but need to lock the door until I'm ready. How can I do this? It's a base model w/o SKS
View 1 RepliesThe trunk lock switch on the d/s inner door panel has stopped working. Also both remotes won"t open the trunk as well. Everything else seems to be OK.
View 10 RepliesI was having intermittent problems with my key fob. I replaced several times, but still had problems with it not working. (A real joy when the alarm is armed). Recently, the driver's door switch (lock/unlock) failed completely. All of a sudden, the key fob is working perfectly (so far) again. Could the failing switch have been causing the fob malfunction all along? I'd like to use the fob, but I'm not fond of the part where the car is alarmed and it won't disengage.
View 4 Repliesmy moms 2004 touareg's switch to lock/unlock got pushed through and is in the door now i'm wondering what you have to remove to get where it would've fallen and how to get it off i've tried to snap it out but i don't want to pull it too hard and break anything else. also how do i get it back in position once i get to it
View 1 RepliesThe power door lock switches, on both driver and passenger doors, only functions to lock the door but will not unlock. When either switch is depressed to lock, both function with no problem. But when depressing either side button to unlock, there is absolutely no activity at all. Like there is no current reaching either one. This happened once about a week ago, but my son came along and just kept pressing the passenger side button and it came back to life after 5 or 6 tries. But now the same problem has recurred and it will not resolve.
View 14 RepliesRepaired my locks on my F350. Had the motor reversed. Before I figured that out I thought I needed to change the wires in the plug. Changed them and it didn't work, put them back and now the switch on that door does not work for the lock; however, all other switches work. What do I need to fix?
View 2 RepliesOn my 97, I cannot power LOCK the doors from the driver's door switch. All other functions work okay. Jumping the switch has no effect.
On the wiring diagram the wires from right and left door switches come together at the relay (seems logical). Where the relay is located?
I have a 20th anniversary gti and the driver side door wont lock and the gas door wont unlock. The passenger door is fine. The drivers side door will not lock from the switch inside the car or the remote. I already replaced the locking module and nothing changed. I also unplugged and cleaned the 3 plugs for the drivers side wiring harness.
View 2 RepliesI have a 1998 ford explorer and I am having a problem with my passenger side door lock actuator, or I think that's what it is. I can lock and unlock all the other doors by using the switch on either my driver side door, passenger side door or the switch in the rear of the vehicle but only the passenger side door does not react when this switch is pushed. I have to unlock the passenger door with the key or open the latch from the inside. I tried to take a look at it myself but I cant figure it out so I will put the door panel back on.
View 1 Replies I have a E99 f250XLT 4X4 Crew Cab PSD.
I have been on this site for the better part of 2 hours searching for my switch problem to no end. Most everything I am pulling up has to do with the lock actuators. I have a switch on the drivers side that will not lock any of my doors. The passenger side switch will work just fine as well as the key fob. All of my actuators work for all 4 doors. No issues with the dome light or door ajar light staying on.
Here is what I have done so far:
I have taken the passenger door switch off and put it on the drivers side and it will not lock the doors.
I have bought a re-manufactured driver side door lock switch and installed it and it did not lock the doors.
I have taken a jumper wire and grounding a pin on the drivers side switch harness and can get the doors to unlock but i can't get it to lock.
Where and what color wires to look for in a harness at the door kick panel or anywhere I might look for a broken wire? It is really frustrating that I can not lock my doors without using my remote.
I have a toyota prius 2005 mileage114000km,yesterday different lights starts to appear on dashboard. Engine check light, a triangular exclamation red sign, A car symbol with ! this sign in colored red and lastly (0 like handbrake symbol but this one colored in yellow. I noticed also the engine delays to switch on electric mode as before. It runs mostly on petrol. I tried to click on the car symbol sign which has lit up but it writes all in japanese language.
View 6 RepliesMy car is having a problem of passenger side light (low beam) being always on even after turning the switch or engine off. I have to unplug it to prevent it from draining the battery.
I am not too familiar with electrical system on the Prius, but suspect bad relay or something related. Where the relay for the headlight is?
Swapped engine last night and now the car won't start and gives me the problem of "transmission lock is abnormal, please park car on a flat surface and apply parking brake."
View 5 RepliesI like to stop for a morning coffee en route to work, about 2 minutes out of my driveway. I'd like to keep the engine running during that time to continue warming the cabin, so I have some chance of taking my gloves off at a traffic light rather than once I'm on the highway. It's about 90 seconds that makes all the difference.
However, only a fool would leave it running and unlocked, while running inside the store. The keyfob can't lock the doors like this (it's ignored while the hybrid system is on), so I use the hard-key once I'm outside. However, that's slow and fiddly, especially with gloves, especially unlocking it again when I come out with my purchase in my hands.