Prius (Gen 2) :: Metallic Clunk - Noise In The Front End
Jun 29, 2010
Over the last few months I've noticed a clunking/rattling in the front end somewhere -- probably started at around 60,000 miles. I've considered T-SB-0300-08, but it can range from a clunk-noise to a metallic clunk-noise, and is often felt on smallish bumps. Sometimes I can feel a knock in the steering wheel, especially at very low speeds. I get the distinct feeling that the front wheels might be wobbling a bit as things clunk going over small bumps. Predominantly a left-side thing, but not exclusively.
View 19 Replies
Advertisement
I had my brakes done almost two weeks ago and last week I noticed a metallic sounding clunk front right (I think) when I went over a bump. It's hard to replicate but I've heard it a few times. On the weekend I reversed and heard that same clunk. When I went forward slowly, I could hear a sound that can only be described as a few screws in a rotating soda can. When I sped up, all sounds disappeared.
I took it to my tech yesterday on the way home. He found a bit of a loose fit between the new caliper and what it attaches to, which he fixed. However, the sound persists. Tech said all suspension components seem tight and normal.
View 8 Replies
Just recently got a 2011 Prius II and i love it. Only having one issue. Sometimes when i hit a bump with the windows open, i get a metallic clunking noise, but if i hit a bump immediately after it, I don't hear it again. Maybe 5 minutes or so later (not exact at all), If i hit another bump it will happen again. Seems to be on both sides of the car. Car has 5k miles so I'll be bringing in for service next week. Does this sound normal or is it something i need to have looked at?
View 13 Replies
I only notice this when I back the car from the garage and come to a stop before going forward. It is a very metallic clunk. It sounds like its coming from the rear passenger side but I am. not 100% certain. It happens when I actually stop before switching to drive.
It is a 2013 Two. 30,000 miles on it.
View 4 Replies
Noticed this morning that my Honda Civic is making a metallic scraping noise while moving -- happens when not braking. Appears to be coming from the left front. I noticed it at very low speeds. It isn't exactly the "wah-wah-wah" grinding sound that changes a little in pitch as the wheel rotates that I'd expect from a bearing. I've been through a bunch of Youtube videos from people diagnosing various wheel- and brake-related problems and haven't found one that matches mine yet.
View 3 Replies
I have a 2008 Honda Civic with about 50K on it. I'm hearing a sporadic metallic noise from front left wheel. Noise goes away when braking.
View 7 Replies
I took my first road trip last weekend in my new-to-me 2010 Tiguan. At speeds over 70mph, there is a quite loud buzzing noise from the front of the roof area. It sounds like 2 pieces of metal are slapping together at a very high rate of speed. I can't for the life of me figure out what it could be. It is really, really annoying. So much so, that I may take another car for my NYC to Florida trip next month. I'd really like to take the Tiguan though...
I have the panoramic roof - it all seems tight and has no rattles whatsoever. There are no loose moldings, no gaps in the windshield molding. The roof rails appear to be tight, however the front of the right one is slightly raised off of the roof surface. I was going to try to tighten it somehow, but don't know how to even access the screws that hold it down.
View 1 Replies
My wife reported that her 2010 Civic LX sedan sometimes made a noise in the front, like cutting sheet metal with an electric saw. I have not heard it myself during several times I drove it. What could be the possible causes?
I plan to drive it some more until I hear the noise. What specific info should I note for mechanic to diagnose the problem correctly?
View 5 Replies
2008 F150 4x4 27000 mi There is an intermittent metallic /rattle sound (like marbles or a chain in a can) seems to be coming from front passenger side; sometimes on first acceleration , sometimes after turning a corner, sometimes after hitting a bump. Doesn't last more than a few seconds Had my mechanic friend look at it on hoist and no apparent loose parts in exhaust system or breaks; 1st noticed it last August ( 7000 miles ago) but it subsides and then reappears with no distinct pattern. best guess is a bad wheel bearing but it's never gotten any worse; other guess is transfer case/ chain problem but 4x4 use isn't much and it goes in and out of 4x4 mode with no problems.
View 2 Replies
I've been hearing a rhythmic, metallic ringy grinding noise coming from the driver side front end of the car that seems to be in time with wheel rotation. It happens between 5 and 40mph, worsens while the steering wheel is turned even the slightest to the right, goes away completely during left turns, reduces and becomes intermittent above 45mph, and between 0 and 5mph, as I turn the wheel to the right from any position, I hear squeaking. I recently had the front control arm, ball joints and struts replaced. It has 140k miles. What could it be?
View 4 Replies
I have owned a 2002 Volvo S60 2.4L for the past two years, and she has served me well. However, I have been having issues lately. She has hit 179,400-ish miles and with age things have started to fail. I want to know how much it will cost to fix these things and if I can do it myself.
There is a metallic popping noise coming from the right front side of the vehicle every time I make a turn (I haven't particularly noticed if it's a left- or right-hand turn when it happens.) I have been advised by my father that it's probably a CV (constant velocity) joint. Is that what's causing the noise?
My right front headlight has gone out, and I've replaced the bulb as well as the fuse, but it's still out. Could it be faulty wiring? The left front blinker has stopped blinking, I hope that's as simple as changing out the bulb.
The shift is automatic, but in the mornings (I've noticed it's mostly when it's cold outside) I attempt to move the shifter out of park and it won't budge for several minutes. Sometimes I have to turn the engine off, and then turn it back on for the shifter to move.
One last question- how often should I change and/or flush my transmission fluid and the filter, and can I do that myself or should I take it to the dealership? (Which I am reluctant to do.)
View 4 Replies
I have a 2009 Toyota Corolla and it's making a loud grinding metallic noise on the front left side. It does it while I drive the faster I go the louder it gets. When I turn to the left it makes it louder, when I turn right the noise decreases. PG&E have been breaking the roads by where I live and there's a lot of little rocks I drive thru. I'm wondering if that's the problem?? What do I do?
View 4 Replies
Was about three blocks from home when the front of the car started making a horrific metallic scraping sound as the front wheel turned. I mean LOUD. Did a quick look for something stuck in the wheels somewhere but nothing. It's not like a branch stuck in the wheel sound, but scraping a shovel on a steel beam kind of sound. Braking seems to change the makeup of the sound, but did not stop it. Parked it in the garage.
I pulled the left wheel off, looked and looked, and looked. Nothing. Fear and sadness setting in. Everything looked normal....except....a faint line on the rotor very near the inside edge. Got a mirror and looked some more, and there, wedged on the inside edge of the pad's metal part and the rotor, was a rock the size of a bb. At most. Got a small screwdriver and hammer and popped it out. Done. Sheesh.
Seriously it was so loud it was amazing. So store in file folder for future reference if needed.
The line can be felt barely with a fingernail and is half the width of a pencil lead, and goes under the innermost 1/8" of the pad. I'm thinking do I want the dealer to pull and turn it, or is it going to affect my braking at all. Pretty much gonna leave it be I think.
View 11 Replies
I am in the process of replacing the front hub seals so my ESOF works again. I tested both front hubs with a mityvac and neither one of them holds any vacuum at all. All the lines are good, and the pump and solenoid seem to be working fine.
I have the driver's side apart and I have a couple of questions.
What's a good source for the vacuum seal? I've checked rockauto, riff raff, and diesel o-rings. Diesel o-rings has it, but the description says it's only for 2003+ Excursions so I didn't order it.
There is no yellow o-ring anywhere on the hub. I assume that someone forgot to put this o-ring back in and this is why I don't have ESOF? I guess what I really want to know is that there isn't some 2000-specific thing where there's no o-ring, right?
After I got the hub off, I spun it around on my workbench and it doesn't sound good at all. It makes a slight metallic grinding noise about 1/2 way around. I assume this isn't normal? AFAIK these are all original parts - but the missing o-ring means to me that someone already had it apart.
There was a lot of water intrusion and rusty colored grease but nothing was dry, the needle bearings were intact and the shaft isn't scored at all where the bearing rides. I'm hoping new seals and good cleaning and it should be good as new. And then it's off to the next side.
View 7 Replies
I should probably arm myself with a sound clip, you can hear it with radio off windows up, but more prevalent outside or windows down. whenever I stop and release the brake, there is a metallic clank noise that is heard outside the car. now I didn't want to bring it up to the dealer, but at my last service interval, I test drove a brand new Prius C and I could not duplicate it. So I don't know if its something that developed after it brakes in and is normal.. The prius C I test drove was utterly quite going from brake to gas until the point the whirling sound starts. mine has a metallic clank and it usually is not immediately as I release but within a second, and I thought maybe it was a change in the regen system, but now I am more curious as a brand new one did not make that sound.
View 4 Replies
This morning, I hit the brakes medium hard and got a short metal-on-metal 'scrape' noise from the rear end. It sounded like a brake shoe to me. Later my wife was out shopping and did a 'regular' stop and got the same noise.
The car isn't driven a lot. It's just under 1.5 years old and has 5,400 miles on it. So, I'm pretty sure there isn't a lot of brake wear. Maybe a little above average from mostly city driving. I assume the rear brakes are self-adjusting. Do they make noise when they are adjusting?
View 6 Replies
Our 04 Prius makes a really scary metallic noise at the top of the engine when it is engaged. All maintenance has been performed within 100 miles of the warning light. We are the original owners and the car has 160k miles. No pulleys are touching their surroundings. Make no mistake, this a LOUD noise that has been growing with time. No warning lights,,,oil level is fine,,,and no metal visible on the dipstick. Sound is originating at the top of the engine and is not a "knock". It is more of a metal on metal type of noise.
View 4 Replies
While driving through a tunnel today I noticed a metallic rattling noise upon acceleration. It goes away immediately when I let me foot off the gas and when I park the car and rev the engine the sound does not occur.
A few days ago, I had to rapidly accelerate and it felt as though I lost power for a split second. I am not sure if these are related, but I am hoping its not some sort of transmission issue (unless that is covered under the hybrid warranty. What was the diagnosis?
View 1 Replies
Lately I've started having an intermittent metallic noise that has been bugging me. At first it occurred on long runs and sounded like it could have been the brakes or something similar. It is not too loud but is continuous, rather like gently rattling your set of keys.
It got steadily worse and I eventually tracked it down to the passenger seat. When I held the seat the metallic rattle stopped.
View 17 Replies
First the specs: 2008 w/38K, not sure which package but nothing fancy. This morning got in the car and started off and hear a metallic rubbing noise coming from the left rear of the car. Sounded like it came from around the wheel area. Temp was coolish around 36 degrees. The noise only happened for the first few minutes and only when going real slow, like 5 or 10 mph, and only when I was turning right.
Sound was like the the sound you get when a brake pad is worn way down and scrubbing on a rotor or drum. Also, the sound would speed up as I sped up until a certain speed then would go away. I actually stopped and restarted to be sure I could make it happen again. Once the car warmed up I couldn't reproduce the noise. Drove the car later in the afternoon with temps in the high 40s and no noise. Also, I never use the E brake so can't imagine that would have any impact
View 10 Replies
I just installed Neuspeed Springs and my car is taking a "clunk" in the front spring, I went back and I replaced the strut bearing mount and the noise still continues.
View 8 Replies
