Have an '04 Prius and banged up the front bumper cover. Wanted to know if a Toyota Matrix front bumper cover from the same year would fit on it (without extensive mods, I know anything could fit, but would it bolt right up?).
View 4 RepliesI need to remove the front bumper cover of my Mk6 GTI. I think I know how to do it.
View 1 RepliesHow do you take off a front bumper cover on a b5.5 wagon? cant find anything on the internet, I am trying to replace headlight lamps. pictures would be great too.
View 5 RepliesI have a 2012 SE v6 with 1600 miles on it. About a week ago, I noticed my bumper cover pulled away from the corner of the headlight and there was a noticeable gap. I pushed on it, and heard a click. The bumper stayed in place. After a couple days driving, it came loose again. I didnt touch it so the Service Writer would see it first hand. Of course, his first instinct was to puch on it, but I got loud quickly, so he kept his hands to himself, and heard me out. I knew if he clicked it back into place I would be SOL. He admitted something needed to be done, not just click it back.
When I picked it up, he said it was a known issue, and there is a TSB on it. He claimed they replaced a bracket. The invoice reads, "ADDED FELT TO TIGHTEN FIT". Yeah, Im sure that will hold just long enough for them to wash their hands of it.
Replacing bumper cover, is there anything I would need to replace underneath it or is it just a simple swap out?
View 4 RepliesReplace the front bumber cover on gx? Mine has a crack and I can get another one but wasn't sure how difficult it would be to swap it out, I guess the toughest part would seem to be the fog lights.
View 6 RepliesSo I recently bought an '09 Elantra for 52K miles. Car's a beauty except the front bumper cover is loose under the headlight on the driver side(got it that way). The first two pics are from the driver side whereas the third shows it in comparison to the passenger (which is totally fine). The gap seems to be getting bigger ever so slightly. What would be the cheapest and easiest fix?
View 1 Replies2013 Prius IV.... I just noticed that my right side rear bumper cover has a 1/4 inch gap between the bumper and the quarter panel. I think it's from me sitting on the bumper while tying up my shoes or something. When I apply downward pressure on the rear bumper, the gap widens. The left side is tighter, but does gap out when downward pressure is applied. In any case, the gap is annoying.
View 19 RepliesLooking for the sequence and clip locations on a 2010 Prius III rear bumper cover to be able to remove and install a new bumper cover. What is removed and how many clips are involved?
View 8 RepliesOk here is my situation:
After removing my bumper cover and reinstalling it, my DRLs are dead. The harness is reconnected and the turn signals distress signals work.
I unplugged the left DRL, turn signal to see if the right would work and vice versa and I still cannot get either to come on.
I checked the fuse and that isn't popped.
I turned the car to the DRL marker mode and auto mode and everything works except the DRLs.
I even took the bumper cover off again and inspected the harness.
I was recently in a fender bender where I was rear ended. My rear bumper cover became detached on the left side and the spoiler underneath it (left side and center parts) became detached. I lost several pieces of hardware in the crash. I was able to clip the bumper cover back in on the left side, and aside from that, I don't believe any bolts, screws, etc. are missing for the bumper cover. However, the spoiler seems to be missing about half of its hardware.
View 3 RepliesI have a Matrix XR 2010 with front bumper sporty look . I like to change the front bumper to regular bumper and the reason is that for the last two winter seasons I have broken the spoilers and basically wreck the bumper.
View 2 RepliesLooking for info on these replacements and is there any manuals out there to assist with the process?
View 1 Replieshow to remove it.My wife backed into my truck and put a dent in the corner of it so I am hoping i can pop it out.
View 4 RepliesHow to remove front bumper?
View 1 RepliesI have a 2012 Camry and was wondering how to remove the rear bumper cover? Someone backed into me so I have a shallow dent I want to pop out of the plastic.
View 6 RepliesSo I'm trying to remove the rear bumper cover on a '15, but it has been a royal pain. I went in thinking that the procedure would be similar to what it is on the '14, but it is way more involved. The biggest issue I'm having is removing the large plastic triangular side bracket. It has these weird T-nuts fastened to the body, which you cant remove, and the whole thing looks like it would need to slide upwards to get it off, but you wouldn't have enough room because the shape of the body just gets in the way.
View 1 RepliesLooking for a DIY for this part? It is part number 5 in the illustration.
View 5 RepliesI want to install a large screen just in front of front bumper with enough height to protect windshield from rocks thrown up on the gravel sections of the road. I can weld a frame (or use a window screen frame), but how to affix it to the front of the car? Are there solid attach points I can use?
View 4 RepliesI need to put a front license plate on my Prius. I notice there are a couple little indents on my front bumper but no holes . Do I need to drill holes or something else here to mount a plate ?
View 13 RepliesSo I have a 2009 metallic Prius and I just recently got into an accident. I ran over a fire hydrant. My front bumper went through a front collision. The left part of my front bumper is pretty much destroyed.
View 10 Replies