I am selling my 2009 Prius. Is there an easy way to remove all personal data (locations, telephone numbers, etc.) from the navigation, blue tooth system? A reset button??
View 1 RepliesYesterday as I took off for work, I noticed no map on my nav screen. Below is the message I am getting. This is a 2004 and my guess is the nav has never been updated. I bought the GX 3.5 years ago as a CPO.
View 9 RepliesMy new '07 Camry with 5K miles on it, driving along, minding my own business. The navigation was on as it always is, but not in guidance mode. All of a sudden I notice the screen turn dark and I see this error: "MAP DVD - Unable to read data. Check if map DVD is correct." (see image)
I have never removed the DVD from the drive. It is clean as a whistle. I wasn't on a bumpy road. I tried resetting and cleaning it, but no good.
I just purchase this 07 LS460 96K miles less then 2 weeks ago, everything was working fine for the first few days then the navi screen keeps on popping up this message "Unable to read data, please consult dealer" I did many research on this forum and it seems like it's a bad HDD and I have also read it cost 15k to have it replace and such. I just bought the car and its out of factory warranty with the year and miles....
I see this unit on eBay from this totaled 2010 LS : [URL] ......
Navigation system has been working fine and then today if get a screen that says:
"Unable to read data - Check if map DVD is correct"...
My Navigation started to display a message "Unable to Read Data" and would not display the Map on my Certified 2008 LS460. All other displays worked just fine and there were no other problems with my Navi. This had been an intermittent problem for a while so I decided to bring it to Pohanka Lexus in Chantilly, Virginia. I paid them $130 to diagnose the problem for them to tell me that I need a new Navigation ECU - which at first they quote $15,000.00 I FLIPPED! I let them know that I would deal with not having a map and navigation and got my car back!
When they gave me my car I started it up to see the wrong time displaying on the clock and a message that reads "A program cannot be read. Please consult to a dealer" displaying on my screen. I immediately got my SA out there to look at the message. He tried to tinker with all the buttons and couldn't get the message to disappear so he brought his supervisor to look at the message.
They explained to me that when diagnosing the problem they tried to reset the system by removing by battery and it didn't work (Yeah, Actually it made things worse!!!) and now it is evident that my ECU has apparently completely died (and I find it such a coincidence that it happen to die while in their hands diagnosing the issue). They took the car back to see if they could do anything to get it back to the state it was in when I brought for diagnosis.
Any way to keep the nav page displayed when on a phone call? I have a 2008 SC 430 with the latest software update. Every time a call comes in, or out, I lose the nav display the duration of the call. makes it hard to navigate while trying to conduct business.
View 4 RepliesI just got a 2014 ES350 and love it, however, I have one issue I can't seem to figure out and I have to assume their is an easy fix. When I use my phone (bluetooth via car) and I'm using the navigation system, the voice still give me directions while I'm on the phone. 1) it's distracting for me to have a conversation the same time the navigation is talking 2) the person on the phone hears it as well. Is their a way to set up so that the voice automatically mutes while I'm on the phone?
View 14 RepliesI'm wondering how I can disable the navigation voice while on a Bluetooth phone call? It's slightly annoying & confusing when the other end-caller can hear my navigation.
View 2 RepliesSo I picked up the IS 350 Fsport and was getting to know it while I peruse certain sections of the manuals. I have not read them front to back, lol.
I thought it was a bug but come to find out that certain navigation and phone features are not available when the vehicle is moving. The options are greyed out and unselectable. For example entering an address and web search are prohibited options while the car is moving. When the car stops, they become avalable.
Same thing for POI search, only edestination and category are available while moving. While navigating if you choose to see the turn by turn for the route under options, only the first three of the next turns will display when moving.
The phone call history is available and favorite contacs are available but contacts are unavailable. I guess they think the voice recognition is good enough substitute. Geeze, they don' know some of my contacts names and their pronunciation. Hard enought for a human to get some of those correct let alone a nav system.
In the navigation manual under safety on p5 it says "For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route selection be done. (of course they don't list all the options unavailable while driving, at lease not in safety)
The Sync is not connecting any longer to my IPhone 6. I push the phone button on the navigation system and it does not bring up the phone screen/menu. It is a dead button now.
View 7 RepliesI have a 2008 Prius and the for about 2 weeks now it has been spontaneously resetting its memory. I turn the car off as normal, the next time I turn it on it tells me I have no gas, the MPG and Miles have reset, all my radio station presets are cleared. It started after I installed a subwoofer ( but I also installed it a couple weeks after I got it ) I thought the sub was draining the battery, but the car starts fine and shows the battery is one bar from full. So I ruled that out.
View 15 Replies.I am trying to transfer my IPhone phone book data to the Prius....(2008)....bluetooth works fine for calls and it says "transferring data" but I never says "data transferred". I have left it hook up and "transferring" for 30 minutes....w
View 2 RepliesWhen I use the "scan" feature of my Scangauge II, sometimes the DTC code and/or freeze frame data will change on me. That is, I check it and it says "1 stored code" (without clearing it), then go back to "Gauge" and then check the scanning function again, sometimes the code has changed to something else! With the freeze frame data, sometimes it will even change as I'm scrolling through the different data fields. Very disconcerting....
View 3 RepliesI would like to understand what this reports mean.
View 3 RepliesI just purchased a 2012 Toyota Corolla LE. The factory radio has a 'Phone' button on the right hand side of the radio. When I push the button, the display shows 'Unavailable.' What this button is for? With the Blu Logic kit, it has a separate phone button that mounts in the dash knockouts. Can the phone button on the radio be used instead?
View 2 RepliesHow do you clear the engine codes on a 1996 Saturn SL-2? I thought disconnecting the battery for more than ten seconds did this or do I need a special tool inserted into the diagnostic port under the dash?
View 8 RepliesEvery thing works fine, Horn, steering wheel controls and the paddle shifter's. I have cleared the code but it comes right back Clock spring?
[IMG][/IMG]......
I have VW 1999 V6 Turbo Passat automatic Sedan.
It's Check Engine Light [CEL] is ON for a while. The code comes as 1476. The mechanic tried to erase the error, but CEL comes back after 60-100 miles. Clearing the codes works for awhile but Error reappears.
The code is for "EVAP Leak detection pump Malfunction/Insufficient Vacuum".
The local mechanic is not sure what to do about it and suggests me to visit the Dealer/showroom. After last time visit to the VW Dealer/ Mechanic, I am sacred to go again, due to exorbitant cost of the last repair. I don't think it was justified.
What should I do now? Where to start?
Yesterday I purchased an 04 Jetta 2.0 with 179k. It was super cheap and pretty clean. Needs work but I bought it to fix it and daily it. Anyway. When I initially went to look at the car, It started right up. after test driving it, I turned it off to make a deal with the guy. Then started it back up to pull on the trailer. Towed it home, Started right up again to get off the trailer. All was good.
This morning I go out, scan the codes (with an obdII scanner, not vag-com), get the codes, then erase them. Just to get a fresh start at the issues. I go to start the car, and it wont start. Turns over but doesn't fire. Could erasing the codes have done something?
Here's the codes that popped up in case they're important to this situation. P0043, P0102, P3081, P0113. I did scan the codes again after I erased them and it wouldn't start. P0043 is still there.
We just purchased seemingly well cared for 2009 Avalon XLS. Navigation system is showing a DVD error (unable to read). First we thought it was missing the DVD then we discovered the DVD port in the truck and through some trial and error got the DVD (#U52) out. We are proceeding with the logic that the DVD is bad.
View 6 Replies