I have a 2008 Touring Package 6 which has served me perfectly for the last 55,000 miles. Today while driving a paving stone fell off the landscaping truck in front of me and (luckily) only came in contact with the black plastic air dam under the painted front bumper. The corner of the air dam is damaged and it looks like a 1 piece unit to replace. What is the part number of this piece?
View 3 RepliesSo I have a 2009 metallic Prius and I just recently got into an accident. I ran over a fire hydrant. My front bumper went through a front collision. The left part of my front bumper is pretty much destroyed.
View 10 RepliesSo a line of panic stops on the highway last night and I lost - stopping an 8000lb rig compared to hondas, nissans, etc. Anyway I just kissed the corner of a nissan xterra and dented the steel part of my front bumper below the driver headlight. Nothing else. It is a 2002 all black limited.
I am wondering about fixing vs. buying a new bumper. A new one from the dealer is 436 and then needs to be painted.
So when I was washing my car for the first time I noticed that the bumper was damaged. It can be fixed or does the bumper need to be replaced?
View 14 RepliesJust bought a 07 camry le model and ordered and painted se lips front and rear and found out they do not fit . So I am stuck with painted lips that doesn't fit. How to install them.
View 5 RepliesLooking for info on these replacements and is there any manuals out there to assist with the process?
View 1 RepliesHow to remove front bumper?
View 1 RepliesI want to install a large screen just in front of front bumper with enough height to protect windshield from rocks thrown up on the gravel sections of the road. I can weld a frame (or use a window screen frame), but how to affix it to the front of the car? Are there solid attach points I can use?
View 4 RepliesHave an '04 Prius and banged up the front bumper cover. Wanted to know if a Toyota Matrix front bumper cover from the same year would fit on it (without extensive mods, I know anything could fit, but would it bolt right up?).
View 4 RepliesI need to put a front license plate on my Prius. I notice there are a couple little indents on my front bumper but no holes . Do I need to drill holes or something else here to mount a plate ?
View 13 RepliesEntrance way to my office parking garage is VERY steep. Aside from careful entry/exit is there a protective shield/device that I can apply to prevent paint damage to under carriage of front bumper?
View 7 RepliesI recently replaced the front wheel well liner on the passenger side. The old one was shredded and I figured it had come loose. I put a new one in and made sure all fasteners are used (bought new fasteners). Still during some freeway driving the liner did not stay behind the lip of the front bumper and rubbed a small hole in it from the tire. Any way to prevent it?
View 17 RepliesHow to modify this light so that it can stay on with the low beams? This light only works in "auto" mode.
View 1 RepliesWas talking to a cab company running over a hundred Prius, they like the gas mileage.
Biggest problem running a hundred plus Prius in LA is the skirt front bumper is so low to the ground (for better aerodynamics) ... less than 5 inches ground clearance when loaded ... it hits the ground and bows the side moldings of the bumper.
I have a 2005 Prius. I came home the other day and parked the car in the garage. I came back out the next morning to find a large puddle of water in the garage and the car still dripping. The drip is from the PS front bumper area just ahead of the front PS wheel. This is not the typical AC water puddle; we have two Prius so I am familiar with that one. I searched here and found a few threads on water pump issue but the description did not quite match what I have going on.
View 7 RepliesMy son ran off the road in a neighborhood and hit some large rocks along side the street. It punctured the front right side and obvioulsly damaged the steering because now it drives terribly and instead of the steering wheel handles being side to side it is 90 degrees perpendicular. The service station I use said it has a bent frame and will need to be taken to a body shop. Will the cost to fix it be worth it especially due to its age?
View 2 Replies2007 corolla 64K original factory calipers. I bought pads and rotors today to replace my front brakes. When I removed the right caliper I noticed that the boot was danaged ( about 1" long tear ). but does not leak. I put the pads and rotors on anyways.What would be the normal repair for this Leave it, replace thr boot, replace the whole caliper or replace both calipers. This also has ABS. I have never bleed ABS brakes before. What is the best way for a DIYer to bleed this type of brakes.
View 9 RepliesSo working on a 2005 F150 with a 5.4. Started off as a phaser replacement. Turn out the passenger side timing chain guide was badly damaged. Front timing chain cover came off and replaced the guide and phaser. Got everything back together and it ran rough. Pulled the front timing cover off and the passenger side was off a tooth.
Retimed that passenger side and also replaced the tensioner because the seal on the old tensioner wasn't the best. Now rotating the engine, i noticed the tensioner pushes then retracts. Seems like a vacuum is created pulling the plunger in, but not entirely sure. Only the passenger side does this, not the drivers side.
Worried about putting the front cover and valve covers on, buttoning everything together and having it skip another tooth because of slack in the chain. Any fix for it or reason why it does it?
From what I've read, I have a special 16" 7 spoke alloy European version wheel on my '09 Prius. Unfortunately, I hit a big pothole and bent the rim enough to render it unusable. I've searched a while and have been unsuccessful in finding a replacement.
View 1 RepliesNoticed a chip on one of my wheels today and would like to get some touch up paint. What is the paint code or the closest color touch up paint for the grey painted 20 inch wheels?
View 2 RepliesA couple months ago, my Prius got stuck in 7 inch snow. A neighbor tow it into my driveway. I suspected and recently confirmed that some of the underbody panels got ripped off in the process. I don't have a lift easily available, and neither my oil change guys nor the Toyota dealer where I recently had it for maintenance mentioned anything about it. Are these panels basically just there to reduce drag and maybe provide some minor protection from rocks from the road, or is it important to replace them?
One of the damaged components is the passenger side front fender liner, the front part of it got ripped off. Looking through the hole, I noticed a white plastic canister (similar to the canisters that hold the windshield washer fluid, but positioned right in front of the wheel, under the headlight). It is empty and completely clean, as if it never held any fluids. From above, this canister is pretty much not visible.