There is a slight noise when turning left sometimes, its not to major, but out of curiosity I went to the mechanic and was they told me this needs replacing:
R& R AXLE SHAFT & CV JOINT - $195.00
R&R STABILIZER LINK BUSHING - $59.50
That was the labor, they did not have the part piece prices since they have to order them.
I have been noticing a slight noise when turning left and I cannot recall if this is normal or not. Typically I always play music when driving. It's very faint and sounds like scraping. Seems to come and go depending on the temp....that is when warmer I do not hear it. I got less than 1000 miles left on the warranty and would like to get opinions if it necessary to take into the shop. Btw, the shop wants $125 to walk in the door...hence the hesitation.
Prius 2006 99200 miles. Never had an issue.
I just replaced the passenger wheel hub assembly (and axle due to complications) and the noise is still there. I have a loud hum that starts at about 30mph, is present when going straight, but gets much louder as the steering wheel is turned to the left. It is completely gone when turning to the right. It gets louder with speed and how much the wheel is turned left. At highway speeds, on a long sweeping left-hand curving connector, the noise is VERY LOUD. There is a slight vibration that occurs, but it's not bad at all. The noise continues when the trans is in neutral. I've even shut off the car while testing this in a parking lot, and the noise continues. The noise varies depending on the height or load of the suspension. It varies as the car rides over dips in the road.
I really though it would end up being the passenger wheel hub, even though there was no noticeable play in either hub. I've had noisy hubs before that had no noticeable play. But after a very obnoxious repair, it's not the hub. All tie rods have no play. All 4 heels were recently aligned. The alignment made no difference in the noise. I replaced a bad tranny mount about a year ago. Motor mounts look good. Ball joints are good. Replaced axles about 3 years ago. Replaced bad struts and strut mounts about a year ago. New control arms due to bad bushings. All these things I've replaced recently were making noises too, but the left-hand hum is always present. This is my last noise and it's driving me crazy. I've always felt it comes more from the driver's side, but my wife disagrees and my hearing isn't great due to too much range time.
Oh, I recently noticed that the steering wheel tends to want to return to center from the right more than it does from the left. Again, alignment was done by a reputable garage just a few months ago. They also found nothing during there safety inspection. I also noticed that the car is not sitting level as it seems that the rear driver-side spring is sagging about 1.5". The noise is not very obvious from outside the car. I know I'm forgetting some other things I've checked for this problem. I'll post more as I think of it.
My current theories are driver's-side hub, something with the steering rack, spring heights, something vibrating (body panel, loose part?), something with the auto-tranny.
I drove our 2007 Prius (79K miles) the other day and noticed a whirring or slight grating noise whenever I loaded up the left front wheel (by steering right) at speed. It's far from a hum or a howl at this point.
View 14 RepliesI have a 2006 Sonota and I'm getting a slight rub feeling when I turn the steering to the left or right. What should my concern be on this and what steps should I take to solve this problem?
View 3 RepliesI'm having a very slight noise whenever I turn the wheel at a certain angle. If I turn more, it goes away.
What could be causing this? Car has 60k miles and on stock suspension.
I'm getting a weird grinding noise when turning left/right. Doesn't happen with normal turns, just at the sharp extremes. What might cause it?
View 16 RepliesWhile I am driving my left headlight keeps turning off and to turn it back on I just have to flip the lights off then on again. I have a 2005 Prius with 160k miles. What part of my car is potentially broken and whether it is a feasible DIY project or not.
View 8 RepliesI have a kind of weird noise and feeling when I turn left with my 1999 1.8T Passat. It sounds like "clac clac clac".
It almost only happens when I'm stopped and I'm accelerating to turn left (U-turn or street crossing). I was wondering if it could be the left universal joint? I don't think and am pretty sure it is not the wheel bearings, but tell me if I'm wrong.
As the title suggests, I am getting a crunching noise when I turn left on my 2013 Passat SE. It sometimes occurs when turning right also, but doesn't happen as often as turning left. Hard to describe it any other way. What could be causing this noise?
View 9 RepliesI am planning to take my 99 Passat into the dealership to have it looked into but I thought I'd come prepared with a little bit of insight into what could be causing this problem.
The left tire vibrates terribly when making a slight left turn. When making a hard left, the vibration goes away, when driving straight, there is no vibration. There is also no vibration when making a right hand turn at all. Could it be as easy as a bad tire or faulty balancing? It seems odd that it only makes the vibration when making the turn slightly and then goes away when turning completely left.
What could be causing the vibration? I've searched the forums but have not found an answer based on the vibration only occurring during part of the turn.
I noticed twice on the commute this morning that my vehicle made a long beep sound after completing a left turn. There were no other warning lights/messages on the dash. The first time, I thought it was something coming through over the radio, so I turned it off, and the sound continued, probably for a total of 6-7 seconds at least. It's similar to the beep that comes on if you start moving and the passenger is not wearing his/her seatbelt. The radio was totally off the rest of the way and it happened at the next left turn I made (when I got off the highway). Although it was icy this morning, it was not particularly slippery at the intersections when I made the turn and I did not notice the TCS coming on, etc.
View 10 RepliesOn my xl-7 upon turning left it makes a poppping noise, its real bad at complete stops,its almost like a cv axle noise. Ive taken it to the dealer at least 8 times and they replaced struts , but it still makes this noise.I also called the main Suzuki customer office and complained. They told me its just one of the characteristics of the new Xl7.
View 4 RepliesYesterday I replaced what I thought was a bad front passenger wheel bearing, I removed the hub myself and took the hub to a local dealer to press out the old bearing and press in the new one.
Took the part back to the shop, got everything all assembled and took it out for a test drive. Right away I notice I still here the same noise, possibly even worse then before.
It was already late in the day so I decided to clean up and call it a day. During my trip home I notice everytime I turned the wheel to the left I here a horrible grinding noise, I did not have this sound before changing the wheel bearing.
Second guessing my own work, I took the car to the mechanic down the road today, not the same place that pressed the new bearing in. The mechanic inspected my work and couldn't find any problems at all. Even the ball joint I thought I had ruined was fine.
He inspected both from wheels for play, no play in either wheel. He then put the car up on the hoist while I remained in the car turning the wheel and accelerating. We were not able to reproduce the sound with the vehicle on the hoist, even with his stethoscope he could not here any noise coming from bearings on either front wheel. Everything sounds great with the car in the air, it's just when it's on the ground when there are problems.
Rotated all tire just to make sure it wasn't an oddly loud broken tire belt, once again no change.
I did replace the stabilizer link kit as well since the old one broke while during the wheel bearing replacement. Is there anyway I could have done something wrong with the stabilizer link that could cause this noise? I doubt this is the case since the mechanic did have a look at it.
I'm still assuming it's the front passenger wheel bearing, but don't wan't to go replacing parts I don't need. (I put a new fuel pump in my TJ 2 weeks ago only to discover all I really needed to repair was the broken wire going to the pump )
So just to be clear my car only makes this noise when it is on the ground, when the car is in the hoist I can turn the wheel and accelerate without any noise.
I have a 2008 Chevy Malibu LTZ and last week I noticed a revving noise like a fan or something whenever I accelerated from a stop and turned left. Continues throughout the turn and stops when going straight. Doesn't happen on a right turn. Also happens on a windy road when turning left more sharply than just a gradual turn.
Also just noticed this in stop and go traffic. When accelerating slightly and letting off there will be a short grinding/clicking noise that lasts 2-3 seconds or sometimes until I hit the accelerator again.
2000 3.5L
On a hard left high speed turn, it vibrates under load. Also while under throttle when making a second gear left hand turn.
Noise will come and go when going over dips at high speeds under load. I have already replaced the left Half shaft.
I am a master mechanic and have had success with changing a half shaft on a similar situation. Looking for other possibilities before I throw another half shaft at it.
I just rolled 100k in the 337. Time to do some refreshing. 2 noticeable issues (non-motor related anyway )
1 - sometimes when turning hard left to right, or vice versa, I hear and feel a "cluck", almost like the something is shifting.
2 - I've got a creak from the front (and I think maybe the back too) when I get out of the car. Sometimes I hear it when I slowly go over a bump as well.
3- I think my rear shocks are on the way out.
In the last 15k I replaced both the inner and outer tie rods. That's all I've done to the suspension.
I have 2010 toyota corolla le japan made, some time I turning left I hear the knocking noise. I already change wheel bearing both side, the strut also both side, the passenger side axle replace the cv boot 2 time with regrease since 2012 jan and left side axle change the whole new axle since 2011 jan , my driver side outer tie are changed since 2014 nov, the mechanic look at the suspension that is not leaking on every suspension parts. so what could be the noise from. I guess may be is the passenger side axle or right outter tie rod , or internal tie rod or ball joint. could you tell me what would be the noise come from or how to check. I have 220k mile with bad burning oil like 1k mile drive have to add 5w20 half quar to 1 quar. how to solve to reduce burn oil and the engine seal is not leak.
View 19 RepliesI am hearing a grinding noise when I turn the wheel to the left.. and when I straighten it again the noise goes away.. no noise at all when turning the wheel to the right. what could it be? 2006 Hyundai Santa Fe / 205,000 km's
View 4 RepliesScraping noise in front end when turning left. Have changed brake pads, calipers, and rotors on both front wheels. There was no scraping noise before changing.
View 2 RepliesI drive a 2003 Hyundai Sonata. I currently have a slight grinding noise (or maybe more of a low growling) when I make left turns. This happened in the not-so-distant past and it was an issue with the power steering hoses (one had rusted through), so we (and by "we," I mean my fantastic father) changed it out. I thought this time it may just be low power steering fluid, but after checking it, I can say it's not low. I'd think if a hose was the culprit again, the fluid would be low. What we should look into?
View 1 Replies