Prius (Gen 1) :: 2002 Brake Pedal Little Harder To Push - Lubricating Lever?
Oct 11, 2015
Recently the brake pedal on my 2002 Prius has been a little harder to push for the first mm of travel it almost "sticks" requiring slightly more effort once it moves past that point it is normal no fading or extra effort required this problem has now progressed to the point where the pedal is kind of crunchy for the first 5mm of travel and occasionally will not return right away causing the brakes to drag a little but again pressure required to stop is exactly the same no fading etc
I am thinking since I live on 2 miles of dusty washboard dirt road and some grit has worked its way into the bushing .
View 19 Replies
Advertisement
I have a 2008 Prius with the platinum 7 yr/100K warranty. The brakes are making a creaking/clicking noise when pressed. It only happens when the car is coming to a stop. If you start the car and sit there and press the brake pedal it doesn’t make the noise. Only when the car is in motion and coming to a stop. I took it to the dealer and they said the brake lever/shaft needs to be lubricated. It is only heard on the inside of the vehicle and doesn’t seem to affect the brake performance.
They said it would not be covered under warranty since it was a lubricating job and not a mechanical problem. They said they would have to take apart the whole dash to get to that part to lubricate it. It would be covered only if the part has failed or broken. They called Toyota to approve the fix, but it was denied. It is just annoying to hear the creaking noise every time I come to a stop. I am supposed to pick up the car tomorrow since they are replacing some other items. I asked for a parts diagram of what part needs to be lubricated to see if I can get to it. I have to take part of the dash apart to install my LockPick and XM radio.
View 4 Replies
I have a Camry at 120K now. Front brake pads was placed at 85K and was told by the maintenance person at that time that brake rotors couldn't be resurfaced since they were close to the minimum thickness.
Braking seems still fine these days. I don't hear any high-pitched noise or feel obvious vibration/pulsation when the brake is applied. The brake pads are still within a good range of thickness as the last check was made a couple of months ago.
But the brake pedal is softer than before so that now I have push harder to get car stopped. It that a warning sign which indicates it is time to replace the brakes rotors and pads?
View 1 Replies
I normally drive my 2010 Prius. But I have been driving my wife's 2012 Camry XLE the last couple of days. (My Prius was clean and hers was not.
Well twice in the last two days I started her car and put it in drive to find it was accelerating uncontrollably! The harder I pushed on the brake the harder it accelerated.
After taking my foot off of the brake I discovered that my size 13 EEE shoe was on both the brake AND the accelerator.
Now knowing this, the same thing happened the second day! Luckily They both happened in parking lots and NO damage was incurred!
This has never happened in my 10 Prius or my 08 Prius. maybe the pedals are not as close or the Prius's low end power was not noticeable.
It would be ironic if all the BS over the floor mats came down to big feet or improperly placed pedals. My feet have been the same size for 50 years and many cars and NEVER had this occur before.
View 14 Replies
I just changed all my flex lines to stainless steel and my pads and rotors were replaced. I had some issues with calipers dragging. I used a power bleeder to bleed the brakes all the way around. Now my pedal feels really weird. If I push the pedal fast it brakes hard then it goes to the floor. If i just push it soft, it will just slowly go to the floor without braking at all.
View 3 Replies
I drove my 2005 Prius 2 hours and parked it for 5 hours. No problems on the trip down. I got back in it and it started up just fine. I was sitting in the parking lot with my foot on the brake (hadn't moved yet) and the following occurred:
The brake pedal seemed to push back on my foot
The red exclamation point illuminated
The yellow exclamation point illuminated
The ABS light illuminated
The VSC light illuminated
The red parking brake light illuminated (not shown)
All of these lights point to the skid ECU. It seems like my skid ECU is toast or something called the ABS & BA & TRAC & VSC Actuator is an issue (never heard of it but I see it connected to the skid ECU). I did a visual check of what I could and everything seemed in order. I pulled a bunch of fuses and I didn't notice any that were blown. (I didn't pull them all but will tomorrow)
After not finding anything, I drove back home. As expected, I had no regen but the bigger problem was that I had no power assist on the brakes. A few times I actually did skid and the car brakes really bad without regen or power assist. If it was raining or snowing I could definitely see a hazardous situation.
I'm kind of at a loss here. Tomorrow I'll pull the kick panel down and see if the skid ECU is getting power but I can't think of anything else that would cause this situation.
View 19 Replies
I have a 2010 Prius Hybrid and lately, on an intermittent basis, I will press the brake pedal and push the start button and the dashboard lights up as normal but when I go to put it in gear nothing happens. The last time it happened the fan was running and I couldn't turn it off. It's like the car is all set to go but all the interior controls don't function. I then shut it off and restart it and everything works.
View 1 Replies
I made a scary discovery the other day, or I should say, my son did... Apparently, you can shift the lever out of park, reverse, any gear without pressing the brake pedal first! 06 GX with 77k ...
View 5 Replies
I have the limited with the push start. In order to start the car, you have to push the brake in so far and then push the push button. Lately the brake pedal is really hard to push down after its been sitting for an extended period. Once its started, all is fine. Its almost like I've pumped it a few times first, but its not the case.
View 11 Replies
2000 Chevrolet Silverado 1500... When slowing down for stop, when almost stopped, sometimes the brake pedal pushes back momentarily, makes a bit of a (errrr) noise, and for two or three seconds during the push back the brakes do not work. Mechanic has cleaned ABS wheel sensors. All brake pads are good. The truck computer shows all systems okay. All brake lines are new or one year old.
View 2 Replies
I had something unusual happen recently... I backed out the driveway and went to put the car in drive and found the shift lever harder to move than normal and it wouldn't go into drive. It would go into park and reverse easily enough. After some manipulation it went into drive and ran with no problems to my destination. At first, I thought something fell down into the mechanism and was causing it to bind. AND of course, when I showed it to a pal, I could not recreate the issue. The next morning it worked fine, but it happened again later in the day, but it took much longer to get it into drive.
On the way home, the check engine and traction control lights both came on. I dropped it off at my mechanics and he diagnosed error code C1201 P0705 and claims that the remote starter (shop installed after market) is interfering with the transmission control module. I contacted the installer of the starter and he says it is not possible, but I know something is wrong... Now, I can't get it to act up and the idiot lights are gone. I need to rely on my vehicle and can't afford to be stranded somewhere. I feel it would be pointless to take the car to the installer, since the warning lights are gone and there are no shifting issues now.
View 2 Replies
Last night I jumped into my Treg to move it into my garage. When I pushed the brake pedal to move the gear selector out of park, I heard a whooshing sound. Like the sound of a bellows-type foot pump I use to inflate my dinghy. I could also feel a slight amount of movement in the transmission lock button on the top left side of the shifter when doing this.
Now I'm noticing this noise whenever I apply the brakes. It doesn't appear to affect braking performance, but does have me wondering. I'll have the dealer check this out when I take the Treg in for the recent recall (got my notice yesterday).
View 14 Replies
My question is this...when my foot makes contact with the brake pedal there is about a quarter or half inch of "space" where I can push the pedal forward before you can feel whatever the pedal pushes against make contact and begin applying braking.
This dead space area will always activate the brake lighting but until you reach that next part under the dash somewhere no braking occurs.
I am quite used to driving my 2010 and this doesn't occur....can not remember if the 99 has always done that and i just realized it or if this is a new issue.
Brakes and stops great with and without load. No issues otherwise. Pedal pops out quickly and normally when taking your foot off.
View 1 Replies
I have a 2001 F-350 Diesel 4x4 crew cab 8ft bed dually 7.3 diesel 6 speed. The issue is that the parking brake pedal is extremely hard to push. One day it pushed down and ratcheted into a locked position as normal and the next day I couldn't push it more than an inch down. I have rear disc brakes with internal drums in the rotors for the parking brake assembly. I replaced the shoes and hardware (which were fine) and I still have the same issue. I removed the front single cable from where it splits into the two rear ones and the foot pedal depresses smoothly and with the touch of a finger with no load on it. What else is it? The only other thing is one of the rear cables unless I am missing something?
View 5 Replies
I have noticed that if I push gas pedal while turning the corner, especially if starting to go uphill, there is significant vibration felt in the gas pedal. It happens every time, as I use the same road each day, for 6 months now. I recently had a rental prius for a weeks, and had the same experience, although not as pronounced as my car.
View 9 Replies
Yellow triangle lighting up together with check engine light.
Also when turning it on display says to press brake and push power to start.
View 6 Replies
Are brake noises normal for the 2010 Prius? I often hear little grunts or barks when I push on the brake - sounds like air or gas. Should I take it in or ignore it?
View 19 Replies
Whenever I stop the car I push the P button, and the push the foot parking brake, then I stop the car with the start/stop button. Yesterday I started the car, and forgot to push off the parking foot brake. I put the stick on D and then I started to roll, after two seconds I saw the red lamp on the dashboard telling me there's a problem, so I check and to my surprise I saw that the break was on.
View 19 Replies
I keep finding air every time i bleed my clutch. I am not losing fluid but i can not figure out whats causing my problems. The pedal is soft at first and then gets harder and it sometimes needs pumped before i change gears or to even get into gear. I am afraid its the slave but i also just may have air in the system.
View 8 Replies
i have a 2013 golf r with about 2k miles. Say if I am in second gear and i kinda press the pedal a little harder then i usually do, i hear a weird noise. kinda sounding like a fake exhaust sound or some sort of vibration near where the e brake is. when i let go of the pedal the noise goes away. I know my description is terrible but its honestly a strange noise.
View 5 Replies
My transmission died last night on the way home from school. I was driving down the road just after leaving school and as I started to accelerate the car, I noticed that it wasn't moving so I pushed the pedal a little harder when I saw the rpm gauge rev. Up pretty high. The car was showing it was in 4 th gear and as I was slowing down so was the number on the display. I came to a stop and tried to move forward but noting. I had the car towed to the dealership so now the fun begins to see what is wrong with it.
I had the car in a few months ago for a whining sound coming from the car especially when I would put the car in reverse to back up. The dealer said we don't see anything wrong, go figure.
I'm suspecting that the transmission is shot. When the car was towed to the dealer I had to engage the parking break because the car wouldn't stay parked, it would roll even though it was in park.
View 5 Replies
