I have a 2016 Prius C Persona. I'm thinking of removing the green trim on the sides and under the headlights. How difficult it is, or if there's a chance I'd damage the paint?
View 19 RepliesHow to remove the interior trim on the rear quarter panel?
View 1 RepliesI am installing the wiring for trailer lights in my 2007 B6 wagon. I need to remove the interior trim panels for this, but I can't find any diagrams or DIYs on where the screws or clips are. I don't want to just go at it and end up putting pressure in the wrong places and breaking clips.
View 1 RepliesI am going to remove LED headlights & do a full HID retro.
Only problem is that the car has a system check & throws a flashing yellow triangle. How to trick the system?
There are 6 wires on the LED headlight harness.
How to remove the front seat trim? It is the trim with the seat control panel. Additionally, where to get the VW Phaeton Service Manual?
View 7 RepliesMy angel eyes were out on both sides, as well as the bulb next to them. I replaced the angel eyes with new ones - still not working. I have checked the fuses - all good. I have not yet replaced the bulbs next to them.
View 1 RepliesI have a 2012 prius 2 with persona wheels on it. These persona wheels only have about 500 miles on them but are already showing random chips and they have never been curbed. These rims are not cheap and I'm concerned.
View 10 RepliesHow to remove the trim around my rear window. Do you just pop it off somehow?
View 14 Replieshow the chrome trim above the rear license plate is removed?
View 4 RepliesI just purchased a new 2013 Prius Persona. I am used to the Prius line as I previously had a 2005 Prius. I have only had the car 4 days but I noticed that the gas mileage is less than what it was on my old Prius. I mostly drive highway at roughly 65 mph. My driving style is the same as it was with the old car. I am getting less than 40 mpg; with my old car I would get roughly 43-45 mpg. Will this improve as the car breaks in or could something be wrong with the car?
View 15 RepliesMy DDM HIDs came in the mail today and fellow vortexer D.Passat00 was kind enough to meet up with me and do the needed vag-com adjustments. So firstly a shout out to him, he's a solid dude and really nice
Now: Is there a DIY for headlight removal? I can't seem to find one, and without removing the headlights I'm afraid there just isn't enough room to install the new HID bulbs without dinging/touching them.
I have a 2010 2.0t Passat and I got the 35w 6000k DDM HID kit
Every bump, slow or fast from left or right side of the car there is an obvious metallic clunk or rattling sound.
View 19 RepliesI have an 06 sport edition with 83k miles. Never a problem or complaint. If I'm not going crazy, I think that I am noticing a very slight performance decrease. I bought this with 63k miles on it and I'm not 100% sure what servicing was done before. Where to start, spark plugs or something like that?
View 13 RepliesBack in July of last year, I installed the OEM foglight kit and replaced the lightbulbs with a pair of yellow Luminics JDM 55w H11 bulbs.
A few months later when it would rain or snow, condensation began appearing on the inside of the foglight lens on both sides. It would burn off when I left the foglights on for a while, but would reappear shortly thereafter. The driver's side would generally stay clear most of the time but the passenger side would always have moisture on the inside.
Then, a few months ago, the driver's side bulb seemed to burn out. Today, when I took them apart to reinstall the clear lightbulbs, it turns out that fluid (it actually looked like windshield washer fluid) had gotten inside the connector and shorted it out, actually melting some of the plastic to the contact. It took a while, but I was able to scrape off enough of the plastic from the contact to get it to work with the JDM bulb again.
I recently have purchased a 2001 Lincoln town car executive edition. I'm having some issues with the brake lights. My running lights blinks and everything work perfect but when I press the brake nothing will light up I've checked all the fuses in the manual and all bulbs seem to be fine.
View 1 RepliesI am a new 2011 PRIUS (III) Owner. -
I would like to know why I am not hearing the two bottom speakers in the back-passenger sides.-Is that supposed to be only the subwoofer?
I have a 98 Explorer Eddie Bauer edition with electronic climate control w/ steering wheel temp and fan controls.
Just yesterday, I was running the a/c set at 74 degrees and it was working great as usual. Then suddenly the fan went from high speed to nothing. The auto control was still on, just the fan stopped blowing. After about a minute when the inside of the vehicle heated up some, the fan kicked back in on high speed. I tried to adjust the fan speed via the steering wheel switches and found that the fan only has high and off speeds.
What should I look for that would cause the fan speeds to stop working or only work on high?
1998 V6 4.0L
After rain I frequently see a small amount of water- 2-4 oz.- drip out of the trim as soon as I open the hatch. Which side seems to depend on the tilt of the car. The only upstream point of entry appears to be the rear glass. Leaning toward a bead of silicone caulk, tastefully applied, to see it this stops it.
View 18 RepliesSince I'm about to pick up my new (to me) 2012 Camry XLE V6, I noticed some colored dots on the tires and wondered what it means. I'm sure glad I Googled it, because it's good information when time comes to buy and mount new tires. It has to do with ensuring optimal balance of tire to wheel. . [URL]...............
View 3 RepliesSymptoms as follows: High RPM at idle (1100 rpm), colored smoke ( not white.....maybe blue/gray....hard to tell) from tail pipes during higher than normal rpm. No noticeable plume of smoke during spirited runs either. Only shows high idle symptoms/ smoke once heated up and running for a while. First noticed while stopped and idling for a spell. No CEL and have not ran it for codes. Cold start shows no smoke and normal rpm.
Vacuum showing 18-20" at idle. AFR kinda all,over the place....but nothing completely out of whack. Can't hear any exhaust leaks and turbo still spools up fine. All IC piping intact.
The side trim panel on the passenger side seat was accidentally pulled away in the front. Checked the tabs and clip are intact, is there any special way to push that in? Or just by brute force?
View 1 Replies