Prius C :: LED Footwell Lights Installation - Fuse / Wiring?
Jul 19, 2013
I bought a LED footwell kit and was planning on *trying* to install it.
For reference, this is the kit i bought : Expandable Million Color SMD Interior Light Kit
Anyways, i bought an "add-a-circuit" to make it easier - basically it allows the kit to plug into an existing fuse (see )
I'd like to choose a 'switched' 12V source in the fuse box to connect this to. ideally I'd like to have the interior lights turn on when I switch on my headlights! I don't want the source/fuse i pick to be "always on".
I was looking at the fuse box description in the manual for the driver's side instrument panel - the number 1 - tail - 10A - parking lights, side marker lights, etc. - is that the one i should use? i don't know how A relates to 12V sources... shrugs
i don't know anything about wiring.
View 12 Replies
Advertisement
I need to hook up a lamp for my mechanical oil pressure gauge and tested all the fuses, they are either on or on with key in run position, but I found none that went on with the lights, which of course is what I need. So now I guess I start randomly sticking needles in wires under the dash and testing for a possible light switch dependent circuit? Or run a wire through the firewall and tap a wire near a running light? There's got to be an easier way, but my Haynes manual seems useless--one wiring diagram for 1995-2008. I will be forced to run it off a key on circuit which means the lamp will be on anytime I drive, day or night, unless I install a toggle switch--not the best way to do it though.
View 3 Replies
I have a 2012 Corolla S and I'm trying to install footwell LED lights that are wired to the dome light, which wires do I need to tap in order to make this happen and how do I tap them correctly/safely?
View 2 Replies
Installion of hitch and trailer wiring on a 2015 PIP?
I found ZERO posts about installing a Curt 11276 hitch on a 2015 PIP. Or installing ANY OTHER hitch on a 2015 PIP.
Same applies to adding wiring for towing a trailer behind a 2015 PIP.
View 4 Replies
Im trying to put in footwell lighting ran all the wires and all but trying to make a connection cant seem to find a fuse box under the instrumental panel...! Where can i connect under panel..! Looking for pics....
View 9 Replies
What I am trying to do it put in 2 led spot light for added backing up light. What i want to do is have them turn on when put into reverse but also have a switch i can use to turn them on when not in reverse. Just need to know what relay I need and if it even can be done.
I was also thinking of just taping into the wiring harness and adding a wire that goes to the spot lights and another wire that goes to a switch that I could turn on and supply power to the light when not in reverse (I know it will light the revers light also) but is it ok to do that?
View 5 Replies
My footwell lights come on and stay on after I turn the headlights on. They go off when I turn the headlights off. I'm on a stock switch and haven't vagcom'ed anything.
View 9 Replies
I am coming out of a loaded Treg that had its footwell lights on low while driving the car, which I really liked. While my new B6 also has footwell lights they turn off once the car is started up. Is there any way to get the footwell lights to stay on from the MFI? Can it be VAGGED? Or is there no way to do this?
View 13 Replies
I tried installing my new DDMTuning 35W 6000K HID headlights with relay harness. No issues until I went to turn the car on and actually power them up. Neither side would work. I checked my power connection, ground, in-line fuse, swapped out the relay, tried without the harness, and nothing worked. I tried putting the stock bulbs back in and I found out they wouldn't turn on either.
I found the issue to be a blown 20 amp fuse in slot 23 (see pic). I replaced it and tried to turn the car on with the HIDs and it blew again. I hooked the stock lights back up and they seem to work fine now with another new fuse. The fuse description says H/LP LO and HID LO LH. Why this fuse is blowing. I am wondering if I just need a higher amperage fuse because of the HID power (in line for harness is 30 amp) or if something else is the culprit. I'm stumped.
View 12 Replies
I've got a 2012 GTI, About two weeks ago I noticed that my footwell lights are now coming on whenever my headlights are on. All the rest of the time, they seem to operate normally. I'm not sure if they've always done this, and I've just never noticed before, or if I've got an electrical problem. I went so far as to actually RTFM, and there's no mention of any separate controls or settings for the footwell lights.
View 12 Replies
Pick up T-reg today. Go home and armed the car, but the foot well lights and the trunk lights do not turn off. The battery will be dried. How can I turn off those light?
View 4 Replies
Just got my Touareg. When i turn on the headlights...how do i turn the footwell interior lights off???
View 12 Replies
Wondering what the max (safe) wattage is for the H7's and 9006's? If I install 100w and 80w respectively, am I at risk for blowing fuses and/or panels? Or melting the housing?
View 3 Replies
I just took delivery of a new 2011 golf and noticed the footwell lights were absent, presumably because Canadians always seem to get shafted. I would like to hear from other Canadian golf owners before going to the dealer.
If absent footwell lights are indeed standard for Canadian golfs, I'm thinking about installing them myself. I found a link on another site that details the install on an MKV : [URL]...
View 5 Replies
So I added in a set of LED lights for my license plate and parking lights. In addition to HID's for the headlights tonight. At some point my tails/parking & license plate lights shut off. I assume its a fuse, I'm wondering if this is common or the result of low quality product.
I've used the same installer/lights on every car I've had for the last 5 yrs and never an issue. No issues in my Scion Xd, Mustangs and so on.
View 2 Replies
The footwell lights come on when i open the door to get into the car and then go off after a short period of time. However, they will stay on all the time after the car is started. Is that normal? Can they be turned off when the engine is running? The manual is no support.
View 5 Replies
I've had some issues with this kit after install. Here are the facts: LED Kit is properly installed, fuses look fine, no problems after initial install. All other LEDs work except now, after a month of working correctly, the interior Red footwell lights will turn on and off periodically.
View 5 Replies
Last night I turned a corner and the footwell lights went on full bright all by themselves for like 3 seconds, then they blinked off, then came back on at the normal dim setting I keep it at. That was weird.
View 6 Replies
I was driving home last night and within the 30 min trip, my footwell lights got extremely bright for a split second on two occasions? Not sure whats going on here.......
View 3 Replies
Does the 2013 RX350 footwell lights not illuminate when driving as they did on previous models? I also do not see a light on the interior door handles.
View 7 Replies
I have a ES 300 H that I am loving so far. I have a question about the footwell lights. Are they suppose to go out after you close the door? Mine have been staying on the entire time while I am driving. If they are suppose to go off or not.
View 14 Replies
